This is an Australian site but I believe its called a Prophet else where but this is a great dry rig for the Tempest which I use all the timeportable-ish small water piece/bong for the tempest
I noticed a nice decaper attached to the stem on the video and it's 1st time I see this live, I only seen it on Tempest manual before. Was it part of your pre-sales kit?Forge isn’t out and if you look through the thread believe @Custom Flower Hardware uses it with the inductor in videos.
Edit: here it is
![]()
Watch Inductor/Tempest🔥😶🌫️ | Streamable
Watch "Inductor/Tempest🔥😶🌫️" on Streamable.streamable.com
This was a very early presale version before the decapper was removed and added to the leather case because of thermal mass changes / heating inconsistencies caused by the decapper on the Tempests capI noticed a nice decaper attached to the stem on the video and it's 1st time I see this live, I only seen it on Tempest manual before. Was it part of your pre-sales kit?
I wonder when/if there will also be a German pre-sale going? Ordering from Mad Heaters directly might possible be slightly more expensive thanks to tax and import fees at customs though
AU? Australia? I actually don't know any stores that are stocking it yet... i should actually ask, I will talk to the ones I know and report back - but my parts came after 1st march - as well as the TA so I am not worried about the TGA rules as long as the sender puts the right bs on the package like "gift" or "8mm hose adapter" it will be fine,fingers crossed i can put an order in somewhere in AU for pre-orders , the stupid TGA vape ban took effect at the start of March so basically the importation of all vapes is banned unless importers have an import licence and permit from the Office of Drug Control, i know wick and wire had plans to stock it before March but not sure what they are doing now.
will prob just roll the dice and do an order directly from Mad heaters, just call it a portable air fryer or something on the box![]()
If all goes well there will be an EU store at madheaters.eu shipping from Croatia when the pre-order starts.I wonder when/if there will also be a German pre-sale going? Ordering from Mad Heaters directly might possible be slightly more expensive thanks to tax and import fees at customs though![]()
This is a duplicate of the prophet, probably made in China. We can find exactly the same in France in some stores. Quality is not realy good : quit thin glass and default on my mine (crack at the level of a groove and scratch at the level of the bottom ; thank you La central vapeur !)Science is fun, been to damn sick to do much more but I have done some, I’m playing around with adding heat while the Tempest is hot, here is an attempt. I have a repeatable pattern to add heat to finish the bowl with out burning the damn thingthe trick is just to heat the Tempest at the very top of the ball chamber, by heating that high you are ensuring that the hottest part of the device is right at the top which means that the air going through the device wont overheat due to a imbalance in the heat through the balls in the heater matrix (which often happens when you heat too low or very very slowly with a low heat or small flame for example) or because of to much conduction to the bowl (normally the forma)
** NOTE: I am using a Tempest with both a calibrated visual gauge and click discs
This is an Australian site but I believe its called a Prophet else where but this is a great dry rig for the Tempest which I use all the time
![]()
Air Mess | Air Filter
Air Mess is a dry filter (without water) for your vapor, like a sherlock / J-hook. With its Ø 14 mm joint it will be easy to connect your vaporizer.Its system of glass spikes allows a very effective cooling of the vapor without degrading the flavors contrary to water filtration. Air Mess is a...instavape.com.au
@RedZep I have been enjoying doing the different materials, I wasn't going to do this last one, but I have decided to try it as curiosity is killing me, I am about to pack my Tempest full of 2mm gem cut rubies and give it a few goes... this should be interesting as in every other device I have had to reduce the temperature by 10% to stop scorching the bowl... we shall see![]()
If all goes well there will be an EU store at madheaters.eu shipping from Croatia when the pre-order starts.
I was also thinking to buy this duplicate of prophet from la central vapeur… so you’d not recommend?This is a duplicate of the prophet, probably made in China. We can find exactly the same in France in some stores. Quality is not realy good : quit thin glass and default on my mine (crack at the level of a groove and scratch at the level of the bottom ; thank you La central vapeur !)
Depends what you class as portable, does it need to go in a hiking bag, day bag or the boot of the car etc...Can anyone recommend a good portable-ish small water piece/bong for the tempest? I’ve been hitting it dry and wanna try a water piece for the 1st time
Just remember that retailers tend to be more expensive since they resell so the total won’t be much higher ordering directly even with VAT. Sometimes ordering directly is also just faster, and you get more options and more possible combinations.![]()
MAD Heaters The TEMPEST
Experience the power of ball vapes in a compact pen-size design. The tempest has both a visual & click temperature indicator & adjustable air intake.verdampftnochmal.de
I wonder when/if there will also be a German pre-sale going? Ordering from Mad Heaters directly might possible be slightly more expensive thanks to tax and import fees at customs though![]()
Check out hookahhead glass on etsy. Makes some kill wpa.
your highI swear the vape Sig on the Tempest stays clean even in high temps. Doesn't have that sort of conduction muddiness I used to associate with the Volcano Hybrid. I figured it's just a high temp pure convection hit, but even my Brick butane vapes don't have the same clean sig as the Tempest.
I could also just be too high right now and I'm tripping. My resistance is back to 0 after not using for almost a month.
It does indeed, I vape the Tempest at 330c with the wand adapter sticking out the bottom 2-3mm , I always get a good clean taste....amazing vape.I swear the vape Sig on the Tempest stays clean even in high temps.
Maybe I was unlucky with my piece. It work well, but whatever, you need to handle it carrefullly because glass is not thick. The original one have a good quality, but it is not the same price ...I was also thinking to buy this duplicate of prophet from la central vapeur… so you’d not recommend?
I hope soon I can buy a tempest!!!
The black one is DLC, not PVD. Much more resistant (and i can tell you that for sureI’m not sure how black PVD would compare to the raw/silver titanium. My first choice would be the black, but if it’s prone to scratching, peeling and less resistant than the raw/silver, I might change my mind.
@Brenyo has them on his site for about half the price, but I ordered 100 2.5 zirc balls from a vendor on Ebay. Took a couple weeks to arrive but they are here now. https://www.ebay.com/itm/176102831935 I don't need them yet, but I am a compulsive backup kind of guy. I haven't yet taken them out of the head for fear I was going to spill and lose them. Now no fear...@Brenyo do you have zic bals in stock? I lost 30 of them when I wanted to detach the VI, suddenly the balls fell out.
Just put some up on the website@Brenyo do you have zic bals in stock? I lost 30 of them when I wanted to detach the VI, suddenly the balls fell out.
*edit*
I got now 79 balls in total and will fill the rest up with ruby. But still I'd like to buy some spare balls.
Holy crap, that's amazing! I will definitely pre-order once it is liveIf all goes well there will be an EU store at madheaters.eu shipping from Croatia when the pre-order starts.
Looks like phattpiggie might be able to help us with that one... Little heat soak with the Chaos Tempest adapter and I reckon that would be a decent bit of conduction introduced due to the snug fit on the sides of the bowl.while being able to deliver a more conduction roast with the right heating technique and a little more effort.
I have no idea what is going on, but it is evocativeLooks like phattpiggie might be able to help us with that one... Little heat soak with the Chaos Tempest adapter and I reckon that would be a decent bit of conduction introduced due to the snug fit on the sides of the bowl.
![]()
phattpiggie on Instagram: "When Tempest meets Chaos. #phattpiggie #chaosballvape #fuckcombustion #fueledbythc #madheater #madheaterstempest #vaporasylum"
119 likes, 7 comments - phattpiggie on March 17, 2024: "When Tempest meets Chaos. #phattpiggie #chaosballvape #fuckcombustion #fueledbythc #madheater #madheaterstempest #vaporasylum".www.instagram.com