1. What does SSTB mean? See our glossary of acronyms.
    Dismiss Notice

NewVape FlowerPot Twax Vaporizer

Discussion in 'Plug-in Vaporizers' started by natural farmer, Nov 17, 2016.

  1. psychonaut

    psychonaut Company Rep

    Messages:
    2,202
    Location:
    CO
    @emmdeemo it will be very noticeable. If you're able to go even lower dish temps you'll probably start to taste a lot of the subtle flower notes on top of the other flavors you'll pick up off the SiC compared to Ti. Some of my flower rosin hits taste amazing, comparable to the flower dankness, and way smoother than their respective flowers.
     
    YaMon, emmdeemo and invertedisdead like this.
  2. Stu

    Stu Maconheiro Staff Member

    Messages:
    9,286
    Location:
    southeast of disorder
    It also fits the ol' LolliCap perfectly.:cool:

    [​IMG]

    I use the OG stand as my ABV tray and I leave the (never used) LolliCap in there just 'cause it fits so nice there. I must admit that I've had it fly into my trash can on more than one occasion when dumping my ABV tho. :doh:

    :peace:
     
  3. emmdeemo

    emmdeemo I am being the five years old.

    Messages:
    1,876
    I hope so. I've had the OGFP with SiC dish, and the wraparound, but the SH was just so amazing with flower and my dabbing experience was still quite limited.

    Now I'm all full of rosin and using a press, I might be near experienced enough to be able to appreciate the VROD.
     
  4. graydeh1

    graydeh1 Double deckin'

    Messages:
    232
    Location:
    Toronto
    Are you dabbing your rosin in the dish? Are u using flower in the bowl also, or straight rosin?
     
    Likes2vape likes this.
  5. Likes2vape

    Likes2vape Well-Known Member

    Messages:
    1,428
    Location:
    On top of a Magic Mountain
    :rockon: Glad it helped out!! :tup:
     
  6. graydeh1

    graydeh1 Double deckin'

    Messages:
    232
    Location:
    Toronto
    I just put the $40 factory second in my cart on the dnail site, cheapest shipping quote was $33 to canada!

    Any other options to get one?
     
    Likes2vape, JCat and steama like this.
  7. psychonaut

    psychonaut Company Rep

    Messages:
    2,202
    Location:
    CO
    I didnt realize you had the TAG SiC dish already, in that case I will be very interested to hear your thoughts on the halo vs TAG dish's. The halo makes it a lot easier to dab in, I can say that with certainty :)
     
  8. YaMon

    YaMon Vaping since 2010

    Messages:
    293
    That sounds like a lot of herb, I can get by on one bowl with NewVapes scoop which just covers the double weave screen. How did you settle upon 1/2 full? I guess if you’ve got it vape it. For me I just don’t want to miss out on any goodness and I’ just fine brushing out one bowl and adding another scoop. Respect! -YaMon
     
    thekayo, Likes2vape, JCat and 5 others like this.
  9. graydeh1

    graydeh1 Double deckin'

    Messages:
    232
    Location:
    Toronto
    Hi man, yeah im just trying different things, to be accurate I usually do a 1/4 fill in the bowl.
    That day I watched a video where a guy filled up his sh 3/4 full, but really if I overfill Im getting pretty even, brown, dried out avb ;)

    How many good hits off the newvape scoop are you getting?

    Vape on mon ;)
     
    Likes2vape, JCat and YaMon like this.
  10. psychonaut

    psychonaut Company Rep

    Messages:
    2,202
    Location:
    CO
    Nothing quite like locking down those one hitters, only flavor and meds, the ABV flavor roasts off somewhere in the jar sparing your palate the off tastes. You can walk away with skunk breath that's more reminiscent to your nug jar than your ABV jar.
     
    Irish vaper, Hogni, thekayo and 5 others like this.
  11. Pyr0

    Pyr0 Stoned Roses

    Messages:
    853
    Location:
    Wirral, U.K.
    So the VROD needs a slower draw than the showerhead?
    I'm not sure I like the sound of that.
     
    biohacker, Likes2vape, JCat and 2 others like this.
  12. psychonaut

    psychonaut Company Rep

    Messages:
    2,202
    Location:
    CO
    Would a vrod owner with some free time mind providing us with a picture of the roast of an unstirred flower bowl uncapped vaped at your preferred temperatures, and let us know load size, and what temps you're using?

    I take single hits as I documented above, if I have to stir the bowl, then I gain nothing over my WA. Please help a brother out.
     
  13. YaMon

    YaMon Vaping since 2010

    Messages:
    293
    At least two very good ones, but I’ll hit it until I’m not getting any vapor at 747 degrees SH uncapped. If I had a grow, a goal, I would not worry about it and I’d be stacking my herb.
     
  14. Pyr0

    Pyr0 Stoned Roses

    Messages:
    853
    Location:
    Wirral, U.K.
    Thanks @steama
    I think I'm just going to have to get one to try myself but appreciate the reassurance :)
    Fingers crossed @VapeFiend.com stock them soon along with extra coils, new posts, carb caps and the dnail sic dishes too.

    My showerhead temps have been slowly creeping up. Currently set to 700 on the controller for 1 hitters. My bowl size varies but I never stir and just bin the avb when it's like tobacco or darker
     
    Last edited: Jun 8, 2018
  15. psychonaut

    psychonaut Company Rep

    Messages:
    2,202
    Location:
    CO
    Thanks anyway, hopefully someone will indulge my curiosity with a photo.
     
  16. waxdab23

    waxdab23 Well-Known Member

    Messages:
    666
    Location:
    Southern California
    Yes this has been my experience as well. Slower draw for even browning with the vrod. I'm also using the vrod carb cap and spinning. 600-650 on the nv controller.

    With SH, I'm 650-700ish and faster draw. Spinning the sh carb cap.

    Anyway, I love both lol. Haven't touched my EVO, which was my daily driver, for the past couple weeks that I've had my flowerpot.
     
    graydeh1, Shrike, YaMon and 5 others like this.
  17. Pyr0

    Pyr0 Stoned Roses

    Messages:
    853
    Location:
    Wirral, U.K.
    @waxdab23 I had an evo as my daily driver too, for about 2 years until I purchased the flowerpot :)
    I prefer the bowls to the baskets and the double/triple deckers sealed the deal

    On the VROD, how much space is there between the top centre airhole and the start of the showerhead holes?

    Does that make sense? I've been hitting the showerhead since I got home from work lol

    Is the inside of the top domed or funneled in some way?
    Im just kinda wondering if Edwyn has done something to ensure the outer edges get as much airflow as the centre?
     
    Last edited: Jun 8, 2018
    Taz4101, waxdab23, graydeh1 and 4 others like this.
  18. invertedisdead

    invertedisdead trance-form

    Messages:
    3,937
    Location:
    Colliefornia
    That ain't no buyers remorse if I ever heard it :rockon: rock on brother @steama and keep vaping the good vape!!!
     
  19. Justpassedu

    Justpassedu Well-Known Member

    Messages:
    2,894
    Location:
    Longisland , NewYork
    As I said earlier in the thread it takes a bit of time to get it dialed in to your liking but once you do they are very similar. I had to re-learn a bit myself coming from the Showerhead. I was not expecting to be able to go much lower in temps compared to the Sh but it is somewhat needed as the VRod has superior heating methods now. Glad you got it dialed my friend. I never experienced the ring myself but happy you figured it out. I'm with you also on not going back to Sh now , This thing just hits amazing now for both flower and concentrate and the Sic halo is a dream.
     
    waxdab23, graydeh1, Pyr0 and 6 others like this.
  20. Likes2vape

    Likes2vape Well-Known Member

    Messages:
    1,428
    Location:
    On top of a Magic Mountain
    @psychonaut i will get you some
    Pics later today. I will do a fast draw like I would with the showerhead and a medium draw to get an even roast.

    @pyro I would say 1/4-1/2” space between the top center hole and the multi hole base. The base has a flat top and is not domed or funneled in anyway.
     
    mixchu69, waxdab23, graydeh1 and 6 others like this.
  21. psychonaut

    psychonaut Company Rep

    Messages:
    2,202
    Location:
    CO
    Thank you brother ! :bowdown::bowdown::bowdown:
     
  22. Justpassedu

    Justpassedu Well-Known Member

    Messages:
    2,894
    Location:
    Longisland , NewYork
    Great Info steama, good to have someone like yourself around these parts helping out. I am going to do some testing myself over the weekend but thank you for that.
     
  23. Justpassedu

    Justpassedu Well-Known Member

    Messages:
    2,894
    Location:
    Longisland , NewYork
    Yw man , that's what it is all about here. I'm glad we can all help each other in a positive way. You all have helped me many times and together we all made this product grow and improve. Glad we all found such a great product bc when I had 1st got one I almost gave up on it when I had issues and I am happy with the help of NV and the forum we improved this vape and made it to what it has become today.
     
    emmdeemo, juxt, waxdab23 and 5 others like this.
  24. YaMon

    YaMon Vaping since 2010

    Messages:
    293
    @newvape918 this makes me wonder whether there should be some baffles above the holes to disturb the air enough so that it does not just go down through the center grouping of holes regardless of draw strength? With the ShowerHead all the holes are open straight up, where with the VRod it sound like the main intake is like an inverted funnel. The air is going to take the path of least resistance when in fact we would prefer all the holes have equal air flow. When that is not the case the herb will not be roasted evenly.
     
    JCat, juxt, graydeh1 and 5 others like this.
  25. Likes2vape

    Likes2vape Well-Known Member

    Messages:
    1,428
    Location:
    On top of a Magic Mountain
    When I first got the vrod I didn’t think I liked it. I was getting really dark abv on the outside of the bowl and green in the center. I was actually kinda mad about it. Felt like I wasted my money on it but once I adjusted my draw speed everything was awesome. It took me a few trys to get good tasty vapor with an even roast of the herbs. You really do have to adjust your draw speed compared to the showerhead, once you do it is pretty much the same as the showerhead.

    The vrod has replaced both the wraparound and the showerhead for me. It really is an awesome mash up of the two heads and is the head I recommend.
     
    Hogni, Chicken #420, waxdab23 and 7 others like this.

Support FC, visit our trusted friends and sponsors