1. What does SSTB mean? See our glossary of acronyms.
    Dismiss Notice

E-Nano from Epicvape

Discussion in 'Plug-in Vaporizers' started by ACE OF VAPE, Dec 7, 2012.

  1. oreo47

    oreo47 Member

    Messages:
    23
    Does anybody know if you can still affect the distance between the heater core and load with the fixed glass stem ?

    I have an enano with a fixed glass stem on the way. I am regretting not getting the adjustable stem but I was just wondering can I keep the stem higher up with my hand when taking a hit as to be able to have control over the distance between the load and heater core?
     
    ACE OF VAPE and UnevenPizza like this.
  2. SloJimFizz

    SloJimFizz Unknown Member

    Messages:
    1,006
    Location:
    Joe's Garage Jamming
    Indeed you can.
    My gong is a fixed glass one and I fill it about 3/4's full and just insert the tip of the heater. As the load is consumed, the weed line lowers so more of the heater can go in.
     
  3. Baron23

    Baron23 Well-Known Member

    Messages:
    4,631
    Absolutely!! :tup::clap:
     
  4. Stoneager

    Stoneager Invisible

    Messages:
    22
    Location:
    Shaky Ground
    Oh no, I didn't take your advice/recommendation as patronizing at all. I am a grown up newbie learning along the way to maturity. I and my wife have been using cannabis in various ways experimentally for about two years. When much younger just out of the military I tried the herb for a scant few years but chose to raise my family as an example without drugs or alcohol. Glad I made that choice.
    Now... I'm enjoying learning and experiencing, due to need, this revisited new relaxing pain medication.
    Oh, not to forget... I have all of the stems for the enano but only run it through glass. Mostly with water but also enjoy using without. I will check out the bizarre looking carb apparatus. Thanks again.

    Very helpful. Thank you.
     
    Last edited by a moderator: Jul 18, 2019
    emmdeemo, epic_arii, ataxian and 5 others like this.
  5. UnevenPizza

    UnevenPizza I dream of Pizza

    Messages:
    402
    Location:
    Mount Improbable
    Hell yeah, I mean it would also be enough to have a few vertical slits insteal of a circular hole if that is easier?

    Has anyone of you tried to make a wooden GonG, by the way?

    I am taking a semi-voluntary bnreak from our kind buds. I still have my nano plugged in for some CBD buds but it's not quite as tasty. Ho-hum.
    I guess it's good to get a bit clear headed again and re-establish tolerances. See ya round...I hope ya don't forget me or nothin'.
     
  6. lhodgy

    lhodgy Vaporhead

    Messages:
    70
    Location:
    UK
    As a desktop / indoor unit it's just no where near as good for me as the Extreme Q, I know they are different machines but I can load a bowl in the morning on my EQ and take hits throughout the day or get blazed if need be, I just seem to have no use or real enjoyment from the Nano and if I want to have lighter hits or micro dose then the Air does a better job for me too.

    I did initially think it was good but that lasted a limited amount of time, I have had some more use the past week and it's okay but I just don't get that satisfaction.

    @Sparkpug Yes, I think this has to be the option, getting a water bubbler. I've never felt the need for one before as I have a few vapes but I think a bubbler will be the answer to getting more enjoyment from the Nano :tup:
     
    epic_arii and ataxian like this.
  7. Summer

    Summer Well-Known Member

    Messages:
    3,535
    Location:
    Long Island, NY
    Well, give it a fair shot through the bubbler. If you are still not satisfied, sell it & move on.
     
    ataxian, Poostuff, Exsmoker and 3 others like this.
  8. BabyFacedFinster

    BabyFacedFinster Capo di tutt'i capi

    Messages:
    1,398
    Since the recent discussion on carbed adapters, came across this cool adapter from sneakypete. Neat shape and while it can be used as a carbed adapter, you could also run two nanos at the same time. Or maybe a nano and a Fury 2 :nod:.

    https://www.sneakypetestore.com/col...-14mm-wishbone-adapter?variant=22647992090705

    Don't forget, you can still play on the FC even during a tolerance break. We would hate to see you take off @UnevenPizza .

    I picked up a bunch of those CBD flowers from Cascadia Blooms. 420 vapezone gave them a great review. At first they seemed blah in both effects and flavor. I then pressed about 7g into 1.5 g of CBD rosin. I can't tell you why, but after 1-2 weeks that rosin became very flavorful and pleasant. I had some old wax sitting around that had lost its flavor and some of its potency. I started taking a dab of the wax and then running the dabber through the CBD rosin for a flavor boost. Works quite well and the CBD rosin produces huge clouds through the nano.

    So maybe a third option could be vaping CBD with a little cannabis just to take the edge off. ;) This would also help dial down your tolerance.
     
    epic_arii, ataxian and UnevenPizza like this.
  9. Summer

    Summer Well-Known Member

    Messages:
    3,535
    Location:
    Long Island, NY
    BFF, the dual adaptors are formally called claisons. That particular u-shaped style was, at least, when I bought it, available in a dual-packaged configuration comprised of both a 14mm & 18mm claison. I don't have a record of what dhgate vendor I bought from, but if you search I'm sure you'll find it or someone here would know. At that time, pre-tarriff, was $10 for the 2. Figured for the price, I'd know if the u-stlye suited me, and, if the glass broke, being thin, @least I'd know if I wanted to make a more expensive investment. I was surprised that it was decent in quality.

    For me, I like the glass buddy style that Baron23 likes. I had the cheap dhgate GB that everybody & his uncle bought, but it was fragile because the glass was so thin. Didn't last long. So, if I make that investment, I'd definitely buy OGB's one:

    https://oregonglassblower.com/18mm-Cloud-Buddy-Y-Adapter-with-Carb-18CB.htm
     
    Last edited: Jul 21, 2019
  10. BabyFacedFinster

    BabyFacedFinster Capo di tutt'i capi

    Messages:
    1,398
    The Oregon glassblower comes highly recommended. The adapter that I used the most was this one by TAG, but they are out of stock and were out of business for a while.
    https://www.thickassglass.com/products/tag-adapter-for-vaporizers-with-10mm-carb?variant=9644988357

    Eventually I got tired of all the glass needed for me to use a carbed adapter. First the bubbler itself, then a 18 to 14 reducer (because TAG only had the 14 in stock at the time), the carbed adapter, the actual gong and then the nano. It was like a Lego construction site.

    A year or two ago I contacted Joda at @VaPeD&CoNfUsEd and he made me a carbed gong made to fit the nano, and I think it was less than the price of the carbed adapter you posted above. It is one of the best purchases I have made in the vaping world.
     
    Last edited: Jul 21, 2019
  11. Summer

    Summer Well-Known Member

    Messages:
    3,535
    Location:
    Long Island, NY
  12. letter never sent

    letter never sent reckoner

    Messages:
    482
    Location:
    San Diego, CA
  13. ataxian

    ataxian PALE BLUE DOT

    Messages:
    12,799
    Location:
    Pacific Ocean
    You know so much about CANNABIS ❌ VAPING!

    The NANO is perfect fit water! POV (WHY)
     
  14. Jimmer144

    Jimmer144 Sargeant REG

    Messages:
    94
    Location:
    Samsara
    Just got the Ice stem, and I gotta say this is def a game changer for the E-Nano, the smoothness and flavor of the vapor make it very enjoyable, I was not expecting it to be such an improvement over my other adjustable dry stem, but its like a whole different experience because you can take much bigger and longer pulls due to it not becoming hot or harsh.
     
  15. Hjalmark

    Hjalmark Oldest boy alive

    Messages:
    936
    This is my Enano stem
    [​IMG]
    A long 510 wooden tip on a grasshopper PFE in top of the 14mm gong running up to 7,5 but mostly always 6,8

    Use the same on the actual grasshopper
     
    Poostuff, jupazo, pxl_jockey and 2 others like this.
  16. Summer

    Summer Well-Known Member

    Messages:
    3,535
    Location:
    Long Island, NY
    @Hjalmark, are those green bands hair bands? And what purpose do they serve?
     
    Hjalmark likes this.
  17. Hjalmark

    Hjalmark Oldest boy alive

    Messages:
    936
    Zipties because the wood has been cracked for like forever now :D I don't mind because waiting for the heater to crap out so I can refurbish it with new 12v heater and laptop power brick
     
    ViCKi LEEKX, Megaton and Summer like this.
  18. BestBuds

    BestBuds Well-Known Member

    Messages:
    65
    Has anyone tried a Dynacoil to vape concentrates in a eNano? I don't have a Dynacoil but wonder if it would work well.
     
    Stoneager and Hjalmark like this.
  19. dutz3013

    dutz3013 Well-Known Member

    Messages:
    31
    The honeycomb screen in my ice stem broke first time cleaning it. Did anyone else have this happen? I just used alcohol to clean it like all the other stems
     
  20. Hjalmark

    Hjalmark Oldest boy alive

    Messages:
    936
    Your suppose to soak the stem not yourself before cleaning! Otherwise your going break something drunk as fuck!

    And also without the jokes, nope not supposed to break that easily :D
     
  21. ACE OF VAPE

    ACE OF VAPE Vape outside the box Manufacturer

    Messages:
    653
    [​IMG]
    We will be offering a new dimmer accessory that comes in a wood box (cherry, maple or walnut) for E-Nano. It has weights in it to help keep it in place on your desk. They will be offered separately as an accessory or as an upgrade when you buy a kit. Hopefully have them up on the site by end of the week. (looking at you Nadia)

    Pro Tip: you can use double sided tape, or velcro and attach it to your stand for even more stability.
     
  22. DogBoy

    DogBoy Well-Known Member

    Messages:
    127
    ...you bastard$...!!!...alway$ after me lucky charm$...!!!... .!.:D.!.
     
  23. invertedisdead

    invertedisdead High Standards

    Messages:
    4,813
    Location:
    The Full Spectrum
    I like the Les Paul knob!
     
    Poostuff, hosstito, ArthurJ and 5 others like this.
  24. BestBuds

    BestBuds Well-Known Member

    Messages:
    65
    Would a few small magnets be acceptable?
     
    Poostuff, Hjalmark and invertedisdead like this.
  25. Driver 8

    Driver 8 Well-Known Member

    Messages:
    38
    I like that. I can see such a dimmer mounted in a stand in the future.
     
    Hjalmark, ubardog and invertedisdead like this.

Support FC, visit our trusted friends and sponsors