Your best best is directly from S&B...it's only a few dollars for the entire kit. I was fortunate enough to have a kind member donate an extra so maybe you might get lucky, but they seem to be the most elusive and easiest to ruin/lose. I wish there were bigger disclaimers on how to properly install that small o-ring, because every time I wrecked or lost one - it was obviously my own fault! I have moved on from the Mighty since, but unless there is something that crushes it i'm pretty sure i'll outfit my kit with another next summer, which is the only real time I need a portable.
The Mighty/Mighty+ by Storz & Bickel
- Thread starter Roger D
- Start date
vapological
Member
small O-ring needs to go all the way down. use your 2 hands doing it make it more easy.
i used to ruin mine as well. since i understood what i was doing wrong no cut anymore.
i used to ruin mine as well. since i understood what i was doing wrong no cut anymore.
Last edited:
h3rbalist
I used to do drugs. I still do, but I used to, too
queefermadness
Well-Known Member
After 3 failed craftys I upgraded to the mighty and loving it so far! I'm hoping I won't have to deal with an exchange again, at least not for a long time, though I must admit they're customer service has been FLAWLESS with every return! I still have 3 crafty cooling units that seem to fit perfectly, any reason I shouldn't use them on the Mighty?
vapviking
Old & In the Way
I returned Crafty #3 this week. (red/orange lights!)
I believe they'll be giving me an upgrade, for a modest fee.
More on that later, maybe.
The other thing I'll say here is that this current interaction has reinforced for me that S&B do care about their C/S, their customers, and their reputation. It's been rough for them fulfilling those aspirations, in light of products that may not be quite up to the task -- at least not in the kinds of use they're getting in the real world.
I look forward to their next generation of products and hope I have some $ left when they come out.
What are the Crafty parts/accessories that will not work with a Mighty? I know the charger won't...and of course some of the o-rings aren't the same...
Tex
Well-Known Member
So here is a picture of the 3D printed stand that my friend made for the Mighty. If anyone with access to a 3D printer is interested in the .STL file let me know as I have permission to share it. This picture isn't the best but I should be able to get other pics from my friend if ya'll are interested. Hopefully I will have one soon.
Last edited:
organic weed
Well-Known Member
Hey guys do anybody has a water tool for the MIGHT to suggest and ideally also an online shop where I can buy it? Something that works great but not too expensive...
vapological
Member
For those of you that don't have a glass, and want to make your cloud smoother and cooler:
put a piece of wet cotton bandage roll on the end of the straw, then take a draw.
enjoy..
make sure it's just a little bit wet and not fully wet, i find it best.
i can take monsters hits now!
put a piece of wet cotton bandage roll on the end of the straw, then take a draw.
enjoy..
make sure it's just a little bit wet and not fully wet, i find it best.i can take monsters hits now!
DHGate is probably the cheapest place for glass.
I ordered a D020-D from Sunshinestore and had it in my hands in 7 days
I also messaged before ordering and arranged for the accessories, nail/dome etc to be swapped for some 18-14mm adapters instead.
These are a few of the better/known stores for bubblers:
Sunshinestore
Stevenlmz79
Kathy0577
Clean & Clear Glass
justcametomind
Well-Known Member
Same here. D020D is what I use and it's perfect for the Crafty. I connect trough a 18mm glass adapter + silicone using the CU and it's fine. With all due respect to those cool guys at Vapefiend, there's no way I'm buying their adapter since it costs 15£ and the D020D probably costs 20£.DHGate is probably the cheapest place for glass.
I ordered a D020-D from Sunshinestore and had it in my hands in 7 days
These are a few of the better/known stores for bubblers:
Sunshinestore
Stevenlmz79
Kathy0577
Clean & Clear Glass
mixchu69
Well-Known Member
Use the mighty the same way. Cut a small piece of herbie tubing (about 2 inches) slide onto CU mouthpiece, and a 18mm adapter on the other end.with d020-d.
dannomac21
Account Closed
What do you guys find is the easiest way to get the screen in the oven out? I broke like 2 toothpicks trying to pick it out of the sides, and used a 3rd toothpick to more or less just push the outsides of it down until it kinda collapsed and then I could just pick it out. Was worried about doing damage to the oven though, or shouldn't that be a worry?
BioSector
Well-Known Member
Sewing needle.
Vapetrees
Vaped Out
Yeah a sewing needle or perhaps a dab tool. I use one that has a straight sharp edge and another bent one. Either works well.
Poostuff
Please delete
The muzmod is seriously good, I recently made another one with a coloured glass adapter & it looks great. I've used my old one for months it's still solid as, doubled the vapor output & stopped my unreinforced sides from warping.
On another note, I say good on Vapefiend for selling something everyone was asking for. Just noticed Australian Vaporizers also have the glass water adapters 14 & 18mm for like 29 bucks. Has to be a good buy you can barely make your own for that price.
On another note, I say good on Vapefiend for selling something everyone was asking for. Just noticed Australian Vaporizers also have the glass water adapters 14 & 18mm for like 29 bucks. Has to be a good buy you can barely make your own for that price.
MinnBobber
Well-Known Member
Did you find colored glass adapters for cheap? I'm looking to make a few muzmods but finding those glass adapters cheap would really help. My usual glass guy's price is like $19 shipped...
Is it a shorty 14 F to 18 M?
Poostuff
Please delete
The coloured one I used was a 7th Floor 19-14 reducer & it cost me $10. I like the way the shape of the base fits onto the CU & I wanted something different. Not the cheapest way to go @MinnBobber
organic weed
Well-Known Member
I use keys, the closest key next to me, pocket, etc... You almost always have a good key next to you
I am wondering if there are some emission from the silicon used for the mudmozz? How long does the glass last before detaching from the plastic base?
Last edited by a moderator: