Cheap High Quality Bubbler

FaceDownScutUp said:

Could you please tell me the joint size on this recycler? I think this is the one I've been waiting for.

Click to expand...

Read the post you quoted

Is that enano to female joint from Dazed? Any noticeable wiggle?

Gah I really need some gong pieces for the E-Nano on the way. I think for now I'm going to get an 18/14 reducer to use with the 14mm it's coming with. Don't really wanna spend $14 on an 18 one from epic. Especially if I can get a basic one from Joda for not much more.

Unboxed the atomic perc from alina0086 today finally. My first breakage from China, it was just the mouthpiece though so I dont care too much as it doesnt look to be at a comfortable angle anyway. Threw a j hook on it instead. This is probably my favorite Chinese piece so far. Hits great with the j hook, i imagine its even better with a whip like jambandphan03 has it. Off to try to rig one up now

blindowl said:

Unboxed the atomic perc from alina0086 today finally. My first breakage from China, it was just the mouthpiece though so I dont care too much as it doesnt look to be at a comfortable angle anyway. Threw a j hook on it instead. This is probably my favorite Chinese piece so far. Hits great with the j hook, i imagine its even better with a whip like jambandphan03 has it. Off to try to rig one up now

Click to expand...

Ask them to refund a portion of the cost and say it was not delivered as advertised, if they value their feedback they will quickly oblige, always helps to make them think twice the next time they package one up or the next time they put their order in for bubble wrap.

My gb-187 arrived today!! I ordered it on the 22nd of October. Bloody quick seeing as I'm down the bottom of Australia. The box had a double layer of heavy duty bubble wrap around it and lots of bubble wrap inside the box too.

Its absolutely beautiful. No logo, perc and stem are straight and no bubbles in the welds. The mouth piece has the 1-2 degree lean that someone else mentioned earlier. I only noticed because I was looking for it.

I still think it would be better if it was a side car. Has anyone taken a gb -187 to a blower to be made in to one? Or is that a bit overboard for chinese glass?

Nugg said:

My gb-187 arrived today!! I ordered it on the 22nd of October. Bloody quick seeing as I'm down the bottom of Australia. The box had a double layer of heavy duty bubble wrap around it and lots of bubble wrap inside the box too.

Its absolutely beautiful. No logo, perc and stem are straight and no bubbles in the welds. The mouth piece has the 1-2 degree lean that someone else mentioned earlier. I only noticed because I was looking for it.

I still think it would be better if it was a side car. Has anyone taken a gb -187 to a blower to be made in to one? Or is that a bit overboard for chinese glass?

Click to expand...

Chinese glass? Perhaps but definitely American. The piece of glass you speak is highly desired

I realized that I have never taken a group shot of my China collection so here it is. Approximately $285 for all this. Can't say enough about Fuck Combustion, this thread, and DHgate. Really helped me with my glass spending habits. I have a decent collection of pieces that cost that much each.


Not pictured:
Blue version D020-2-W,
Kathy double matrix (do not buy)
frit to turbine (sold)
barrel to funnel (broken on purpose)
D020-2-W (dropped by friend)

ykjr said:

Read the post you quoted

Click to expand...

I swear I read the post a million times. That's what I get for browsing and medicating at the same time. Thanks!

Nugg said:

My gb-187 arrived today!!
I still think it would be better if it was a side car. Has anyone taken a gb -187 to a blower to be made in to one? Or is that a bit overboard for chinese glass?

Click to expand...

That is the one I am waiting on. Tho I think I will wait till one comes that way...

This is amazing.. My Mobius (G186) AND the E-nano both show delivered and are waiting in my mailbox!

I just got to work 30 minutes ago unfortunately. And I won't be able to get an 18/14 from an LHS until tomorrow. I think I'm going to bring some domes, nails, adapters, etc. with me and see if I can trade.

This is going to be a long day ahahha. So much AWESOME sitting in the mailbox argh.

flickyourbic said:

This is amazing.. My Mobius (G186) AND the E-nano both show delivered and are waiting in my mailbox!

I just got to work 30 minutes ago unfortunately. And I won't be able to get an 18/14 from an LHS until tomorrow. I think I'm going to bring some domes, nails, adapters, etc. with me and see if I can trade.

This is going to be a long day ahahha. So much AWESOME sitting in the mailbox argh.

Click to expand...

That's exactly what I'm using while I read ur post lol. It's a fantastic combo!!!!

Well I ordered another gb-186, 2 gb187's and a recycler (http://m.dhgate.com/product/recycler-glass-bong-glass-oil-rig-bong-smoking/211852133.html#pd-019) idk if this has been reviewed yet but I picked it up anyway.

My first gb-187 arrived today before the others, even though I ordered them at the same time (Oct 24th). I couldn't detect any flaws and I'm super happy wit it. I'm glad I bought a second just in case.

turdhole said:

the bubbler i bought the other day and gave to my brother just fell apart in my hands...damn you chinese glass! well good thing i just ordered another one or what would now be a replacement.

i was wiping of the mouthpiece and snap...

Click to expand...

ive seen a lot of BREAKS having to do w this piece..

vapordab said:

A domeless quartz banger style nail(which is all I use) would make it a comfortable distance, but personally I don't see the appeal in these style rig, or the baby bottle, but to each their own.

Click to expand...

i finally picked up a nice banger style quartz nail and personally i dont like it.. i have to say im still WAAY more about the normal domeless quartz nails, w the hole lower in the middle. they conserve my dabs and i get waaay bigger hits. i like the banger, but i swear i have to dab ATLEAST double the size dabs :-/

All of this talk about the GB 186 and 187 has forced me to get my 186 out again. I never used to like it but now I am using it with a Joda carbed gong and it is awesome. Much faster extraction than the D02o-W for me. Lucky I checked because I was almost ready to give it away and it is now promoted to co-daily driver status

So I have had the D020-d matrix perc for a while now, and as much as I try I cannot seem to fall in love [or even like] this piece. It is personal challenges, but I don't think this one is for me.

With concentrates, trying to drop one on the nail makes me go cross-eyed as fuck and its all blurry vision that close to my nose. Same problem with using it with the Lotus cap, I can't focus on an area that close to my face... makes me wonder how some of you all can enjoy those micro oil rigs I am starting to see everywhere.

With the nano, my adapter puts it all up in my nose/face and I have to spin the piece sideways just to get a comfortable rip. I am glad I tried this piece and learnt what I do and do not like, it will help me make better decisions on future glass purchases.

Once I find a suitable replacement, I will post up in the classifieds and pass on the great deal I got to another FC member...

I know there are a lot of great reviews on this piece- I am just sharing my experience which has been different from most of the other posters. For me, this piece makes me want to move to other glass.

FlyingLow said:

So I have had the D020-d matrix perc for a while now, and as much as I try I cannot seem to fall in love [or even like] this piece. It is personal challenges, but I don't think this one is for me.

With concentrates, trying to drop one on the nail makes me go cross-eyed as fuck and its all blurry vision that close to my nose. Same problem with using it with the Lotus cap, I can't focus on an area that close to my face... makes me wonder how some of you all can enjoy those micro oil rigs I am starting to see everywhere.

With the nano, my adapter puts it all up in my nose/face and I have to spin the piece sideways just to get a comfortable rip. I am glad I tried this piece and learnt what I do and do not like, it will help me make better decisions on future glass purchases.

Once I find a suitable replacement, I will post up in the classifieds and pass on the great deal I got to another FC member...

Click to expand...

Have u checked out the gb-186? The joint is in front of the can and much lower. That might suit u better.

Love suggestions

I do like that a good bit better than the D020d, but I am not sure adding that second matrix perc is really what I am looking for either.

I guess I could have been a bit more specific in the last post; I am looking for these qualities in my next piece

• More distance from vape to face.
• Tabletop bubbler.
• No taller than 14-15 inches.
• Less diffusion than a matrix. Seeking flavor country.
• Large base

I typically go for pieces with removable down stems and mouthpieces, like the one I have seen on here with the atomic perc, but that is not a deal breaker for me and I am open to looking at other options.

FlyingLow said:

So I have had the D020-d matrix perc for a while now, and as much as I try I cannot seem to fall in love [or even like] this piece. It is personal challenges, but I don't think this one is for me.

With concentrates, trying to drop one on the nail makes me go cross-eyed as fuck and its all blurry vision that close to my nose. Same problem with using it with the Lotus cap, I can't focus on an area that close to my face... makes me wonder how some of you all can enjoy those micro oil rigs I am starting to see everywhere.

With the nano, my adapter puts it all up in my nose/face and I have to spin the piece sideways just to get a comfortable rip. I am glad I tried this piece and learnt what I do and do not like, it will help me make better decisions on future glass purchases.

Once I find a suitable replacement, I will post up in the classifieds and pass on the great deal I got to another FC member...

I know there are a lot of great reviews on this piece- I am just sharing my experience which has been different from most of the other posters. For me, this piece makes me want to move to other glass.

Click to expand...

I have that problem if I ever try dabs with the D020. It is just too close to my face and fucks with my vision. The GB186 is a much better distance.

I've been using my 187 a lot recently, with my log vpae (HI) and glass gong. I really like the size and just add a bit more water to limit the can size and slow down diffusion a bit. I agree the D020 line is rather short and close to the face. Mine don't get very much use, unless I'm rotating around with the log vape for variety. I don't care to have hot nails so close either. I have found the 10mm mini-rigs to be challenging but fun, in a way, to use, but not so much as a daily driver. I haven't been dabbing as much lately with low oil supply. The Atomic I recently got has been working quite well with the Sublimator. Very glad to have added that one.

Yeah Im looking at the atomic at the moment. I have a really nice whip with a 12 inch glass mouthpiece from my Roi Beast hookah that should fit nicely. we don't see many detachable mouthpieces.

I'm back!-

cause I'm curious, and have a few questions for the perc pro's here at fuckcombustion cause I'm making yet another purchase here soon (I do get tired of rigs quickly xD).

Soo, I've noticed @Tweak @NickDlow @vapordab and more of you talk about the mobius pieces, (I already have the D020-D, and the honeycomb and birdcage bong) off and on for the last 60-80 posts. I am debating between both the GB-186 and GB-187 for dab rig purpose. I really love my D020-D, which I already have, so that's why I'm debating upon even getting the GB-187 and just grabbing a GB-186 (since it's the double matrix version, I just hope it doesn't over perc and soak up all the dab flavor)

Aaaand, I notice that the kathy double matrix pieces (despite the good rating on DHGate), are not rated very well on here; however, I've noticed that the ratio's of the stem and barrel size of the piece has changed since it's initial release (and also released both a double birdcage and double matrix version).


http://www.dhgate.com/product/new-two-function-green-glass-bongs-smoking/194745788.html


http://www.dhgate.com/product/brown-color-glass-bongs-water-new-percolator/199022307.html


http://www.dhgate.com/product/to-sell-two-function-two-birdcage-percolator/212087709.html

Any opinions on these? I was thinking about getting the top two (the bottom one looks really nice as well, but expensive; however, after hearing all these bad comments about kathys pieces, maybe that's the one I SHOULD get ?), then selling the one I don't like- but if the piece really sucks that bad I would definitely like to know so I can save myself the trouble (easier to sell pieces that I also enjoy )

Also, any comments on this kathy recycler

http://www.dhgate.com/product/2014-sep-new-recycler-glass-bong-smoking/209688146.html

or this kathy recycler

http://www.dhgate.com/product/new-come-tobacco-water-pipe-9-quot-two-founction/212039996.html

or the CCG sidecar pendant

http://www.dhgate.com/product/hot-sales-new-design-sidecar-pendant-vapor/209811613.html

or CCG recycler

http://www.dhgate.com/product/new-popular-design-recycled-water-glass-water/210841650.html

or CCG's remake of the kathy recycler mini-bong

http://www.dhgate.com/product/5-9-quot-recycled-oil-dabber-vapor-rig-water/210620870.html

THANKS AGAIN FOR ALL YOUR GUYS HELP!!

http://m.dhgate.com/product/product...oking-pipe-with/205698455.html/205698455.html

This thing is actually a lot higher quality than I was expecting and got here fast. I see no real flaws or warps anywhere. It works so great with the lotus, I'd recommend this setup to anyone. It costs $150 total (25+8+32+75+10) and is well worth it.

Haakkon said:

http://m.dhgate.com/product/product...oking-pipe-with/205698455.html/205698455.html

This thing is actually a lot higher quality than I was expecting and got here fast. I see no real flaws or warps anywhere. It works so great with the lotus, I'd recommend this setup to anyone. It costs $150 total (25+8+32+75+10) and is well worth it.

Click to expand...

What are all of the parts required to make that? I think it'd be perfect if I pre-set this up for a friend who loves vaping but doesn't know where to start in regards to buying one himself. He has suffered a car accident and has trouble with some tasks due to a brain injury; and this seems easy to use and clean!

Deja Vu said:

What are all of the parts required to make that? I think it'd be perfect if I pre-set this up for a friend who loves vaping but doesn't know where to start in regards to buying one himself. He has suffered a car accident and has trouble with some tasks due to a brain injury; and this seems easy to use and clean!

Click to expand...

You mean the Lotus Vaporizer cap? Omf, I wouldn't recommend that vaporizer to someone who has trouble with some tasks - it requires a bit of skill to get the hang of using the Lotus.

I am still working on getting a replacement for my defective fab egg from Kathy. She just sent me this.
kathy05772014-11-04 10:18:50

LN532404950CN

<oops>2014-11-04 01:11:44

Yes that is great

kathy05772014-11-03 16:50:58

if we sent you black color is ok? my stock all black color now

Sorry the conversation goes from bottom to top. But can anyone tell me what that sequence of numbers and letters are and what I can do with it?