Discontinued Versa Infinity - The Glass Vaporizer

Do you like our vaporizer so far?

  • yep.

    Votes: 113 72.0%

  • nope.

    Votes: 47 29.9%
  • Total voters
    157
PoopMachine

PoopMachine

Well-Known Member
CheeseSandwich said:
@Madcap79 had it on for 2 hrs and was still able to touch it? Correct?
Click to expand...
CheeseSandwich said:
Hopefully we can all workout something like the wrist band thing with cloud. At least these issues are being pointed out anyway. I'm very excited to hear about the boost working well for @Kaptan
Maybe I should have just went with the infinity instead of the G1?:doh:
Click to expand...

Good luck... I spent a LONG time trying to come up with something to make the MW usable. I have samples of all kind of industrial insulating materials and none of them did squat. They might delay it getting hot but eventually it got just as hot. I think where the situation might be improved is with a inner and outer shell but again, thats just my thoughts.
 
CheeseSandwich

CheeseSandwich

Well-Known Member
I may be less concerned because I'm already used to dealing with the burning hot sublimator.:lol: Then again it has a handle to make it easier but I have a few scars for sure.
 
1_gr8_underdog

1_gr8_underdog

Trapped in the Astral Planes Back from the dead
I am very excited to see it is performing well. My VAS will not subside. I want my G1. Just ordered this, hopefully it will arrive around the same time as my G1. I think it will pair nicely. Plus it will be nice when I do the video using the G1. Keep up the testing, can't wait to hear more of your thoughts while they develop as you use it. :tup:​
 
Last edited:
Mr. Gweilo 420

Mr. Gweilo 420

Dude
1_gr8_underdog said:
I am very excited to see it is performing well. My VAS will not subside. I want my G1. Just got this, hopefully it will arrive around the same time as my G1. I think it will pair nicely. Plus it will be nice when I do the video using the G1. Keep up the testing, can't wait to hear more of your thoughts while they develop as you use it. :tup:​
Click to expand...
Hey I just received the same bubbler. Ordered last Saturday and received it yesterday. I hope it pairs nicely. Now if I could just get a tracking number from versa...
 
Madcap79

Madcap79

Jack of all trades, master of none.
1_gr8_underdog said:
I am very excited to see it is performing well. My VAS will not subside. I want my G1. Just ordered this, hopefully it will arrive around the same time as my G1. I think it will pair nicely. Plus it will be nice when I do the video using the G1. Keep up the testing, can't wait to hear more of your thoughts while they develop as you use it. :tup:​
Click to expand...
I believe that will work nicely. A bent neck would be a plus. I wanted to use the Versa with my EFS gridded donut but it didn't fit. I might just stack adapters. I need to get a 18m to 18f adapter. I only have male to male and fem to fem. Boo.
 
Globbs

Globbs

Well-Known Member
It sounds like the infinity could use some sort of heat shield around the heater. Keeping the heat concentrated in and around the heater is crucial to high performance. All that lost heat takes away from the heaters efficiency. Something like a high temperature thermal blanket/insulator could work well. Might allow for easier handling especially in concentrate mode or at high temps etc...
Focusing the heat inside airpath is what will help bring out the power in this beast.
Mine should be here monday! I cant wait to test it out.
 
Tweak

Tweak

T\/\/34|<
For the bowl getting hot, how about some Test Tube Clamps/tongs

CE-TUBHOLD.jpg


DDave's idea for using with the EQ Cyclone getting hot.
 
Tweak,
  • Like
Reactions: Mister G
Mister G

Mister G

Deceptively Old Fart
Tweak said:
For the bowl getting hot how about some Test Tube Clamps/tongs

CE-TUBHOLD.jpg


DDave's idea for using with the EQ Cyclone getting hot.
Click to expand...

Could be like a glass sublimator atomizer. On the sub forum people often wonder how to make a heated glass atomizer for the full sub effect with better taste through glass, this thing just makes it hot via regular usage. Now if it also produces sublima....well, let's not get ahead of ourselves. :)

I'm very encouraged by the user reports on the boost function. Mine's in Jersey, but still says Monday delivery by 8pm. I imagine a bunch more people got theirs today.
 
Last edited:
Mister G,
  • Like
Reactions: Globbs
Mr. Gweilo 420

Mr. Gweilo 420

Dude
Well I have finally received a tracking number. Better late than never I guess. The have sent mine international through USPS. There is no mention of expected delivery time for me unfortunately. Could be a long wait. My past experiences with USPS have not been particularly good.

Also - just a quick question about mating my bubbler with the Infinity. I have just received the same bubbler that 1_gr8_underdog mentioned a few posts back. I'm totally new to using water (2 days in actually) and am not sure if I need anything extra to mate it. Will it work with whatever came with the bubbler and the pieces that Versa send? Sorry for the silly question.
 
Mister G

Mister G

Deceptively Old Fart
Mr. Gweilo 420 said:
Well I have finally received a tracking number. Better late than never I guess. The have sent mine international through USPS. There is no mention of expected delivery time for me unfortunately. Could be a long wait. My past experiences with USPS have not been particularly good.

Also - just a quick question about mating my bubbler with the Infinity. I have just received the same bubbler that 1_gr8_underdog mentioned a few posts back. I'm totally new to using water (2 days in actually) and am not sure if I need anything extra to mate it. Will it work with whatever came with the bubbler and the pieces that Versa send? Sorry for the silly question.
Click to expand...

It should probably fit, the flared end of the Infinity unit is 2.5" diameter according to versa, so you need the bowl to be at least 1.25"+ away from the pipe neck, from the picture it looks close but I'm going to guess it just makes it. I'm in the same boat with my glass pieces, worse comes to worse, I'll go to an LHS and see if I can get an adapter or a cheap glass tube with an angled downstem.
 
Madcap79

Madcap79

Jack of all trades, master of none.
Mr. Gweilo 420 said:
Well I have finally received a tracking number. Better late than never I guess. The have sent mine international through USPS. There is no mention of expected delivery time for me unfortunately. Could be a long wait. My past experiences with USPS have not been particularly good.

Also - just a quick question about mating my bubbler with the Infinity. I have just received the same bubbler that 1_gr8_underdog mentioned a few posts back. I'm totally new to using water (2 days in actually) and am not sure if I need anything extra to mate it. Will it work with whatever came with the bubbler and the pieces that Versa send? Sorry for the silly question.
Click to expand...
The bowl you use to roast the herbs will make it tall enough to clear I believe. May want to order something just in case.
 
Mr. Gweilo 420

Mr. Gweilo 420

Dude
Thanks for the tips guys. Has anyone hit it dry yet? I understand there should be some kind of glass stem like we see with log models or even like the one that goes with the LSV.
 
G

GR

Well-Known Member
Mr. Gweilo 420 said:
Thanks for the tips guys. Has anyone hit it dry yet? I understand there should be some kind of glass stem like we see with log models or even like the one that goes with the LSV.
Click to expand...

They mentioned a whip to me and said they would include it with my concentrate bowl.

You can always use your glass piece with no water in it. I do this with concentrates a lot.
 
Madcap79

Madcap79

Jack of all trades, master of none.
Just hit it at 91v with half a screen worth. Pulled hard and got good vapor production. Almost as good as 82v with boost. Ripped again and got another slightly less milky hit. Well medicated. Should I record every first hit?? :science:

Turned unit off. Going to try to disassemble the unit. What's the worst that can happen? :)
 
Mister G

Mister G

Deceptively Old Fart
Madcap79 said:
Just hit it at 91v with half a screen worth. Pulled hard and got good vapor production. Almost as good as 82v with boost. Ripped again and got another slightly less milky hit. Well medicated. Should I record every first hit?? :science:

Turned unit off. Going to try to disassemble the unit. What's the worst that can happen? :)
Click to expand...

Well if you're going to be reckless, I'd say see if you can try to combust with it. :evil:

But seriously, they did say they were going to have a .pdf manual with component replacement instructions. Or if you ask on their forums, they might put some up and you won't risk breaking anything, although with your job, I'm sure you're plenty handy enough. :argh:
 
Madcap79

Madcap79

Jack of all trades, master of none.
Mister G said:
Well if you're going to be reckless, I'd say see if you can try to combust with it. :evil:

But seriously, they did say they were going to have a .pdf manual with component replacement instructions. Or if you ask on their forums, they might put some up and you won't risk breaking anything, although with your job, I'm sure you're plenty handy enough. :argh:
Click to expand...
I'm definitely not handy around the house but I'm fairly confident I could do it but who knows. Gonna live on the edge. Haha. I'll take some pics.

EDIT: A birdie told me I should wait for instructions to disassemble. I'm being watched! :uhoh::lol:
 
Last edited:
You must log in or register to reply here.
Top Bottom