Discontinued VRIPtech Heating Wand

Hanibal Lectin

Hanibal Lectin

Well-Known Member
nice bong! I'm going to have to get something like that.

I noticed after taking a couple of hits the bowl doesnt really cook evenly,there is always a small hot spot on the herbs where the bend is that makes it closer to the heat because of the angle. Seems like a straight bowl would be better to cook more evenly.
Cant say it affects the size of the hit though because this thing will rip as hard as you want it .
 
Hanibal Lectin,
N

nedvaper

Well-Known Member
I've been using my VHW for about two weeks and I love it. I also bought the shorty/bowl combo, which worked quite well until the dropped it - only the shorty broke (so I can still use the wand with just the lower bowl), but I was thinking of getting a blazemaster bowl. I looked around and could not find the email of the guy who makes these. Would someone be kind enough to send his email to:

nedvaper@gmail.com

Thanks!
 
nedvaper,
minnesnowta

minnesnowta

Vaporist/Glass Head
Here we go again. This gets asked so often... Google blazemaster glass. First thing that pops up is is glasspipes.org profile, click that link. It will take you to his page and there's a link for his email there. It's custom done to your order so it's going to be a wait. Around a month. Maybe more.
 
minnesnowta,
L

lepstadder

Well-Known Member
When she put it into the water all i heard was this sizzling and pooping and it steamed up out the holes.

I was so worried it cracked or something.

I am so worried that something is going to happen to this thing and i would be without a vape...
 
lepstadder,
S

stevebeast

Well-Known Member
Hey Stonemonkey, how important is that coil mine work so good i didnt want to jinx it or take a chance of breaking one. i was planning on blowing it off and if the element burns out i'll get one when i get it repaired.
the waffle bubblers are bad ass!!!!!!!
 
stevebeast,
stonemonkey55

stonemonkey55

Chief Vapor Officer
Manufacturer
the coil adds very little in terms of performance, its just to keep the ceramic from fusing to the glass and to increase durability. I live near the VripMaster himself which is why I upgraded, if you want one just email him, otherwise, i don't think its that big of a deal. I look the looks of it without coil.
 
stonemonkey55,
O

organicmilk

Well-Known Member
SM
I like me some waffles n milk too.:lol: Of all the videos you've done that has to be my favourite. The SG puts a tear in my eye.:brow:

Looks like you had another dog poking it's head in the later part of the video. What kind are they?
 
organicmilk,
stonemonkey55

stonemonkey55

Chief Vapor Officer
Manufacturer
There is a pet thread in the lounge that has close ups of all my dogs. The ones that are in the video are jojo the beagle and chewy the Yorkshire terrier. Chewy is my brothers dog.

Also heard a new version of the vhw coming out soon with all gong joints. I can already see it, this will be the ssv hands free versus normal wand debat all over again
 
stonemonkey55,
SmokeTheState

SmokeTheState

Smokey The State Bear
stonemonkey55 said:
There is a pet thread in the lounge that has close ups of all my dogs. The ones that are in the video are jojo the beagle and chewy the Yorkshire terrier. Chewy is my brothers dog.

Also heard a new version of the vhw coming out soon with all gong joints. I can already see it, this will be the ssv hands free versus normal wand debat all over again
Click to expand...
Oh shit, what is the word on the all gong version?

I want to grab one of these and a blazemaster slide!
 
SmokeTheState,
minnesnowta

minnesnowta

Vaporist/Glass Head
It's gonna be a bit for the gong Hester covers and I love the idea of it. Kinda curious to see exactly how they'll actually do it but it should be pretty cool. I'd just like to have a centered heater cover. My inner piece is a bit off center so it hot spots so I have to spin it. Not a big deal for me. Gong heater covers would make blazemaster slides useless and I dunno if I like that. My new blazemaster should be here early febuary so there will be two in the state of Minnesota. I got a worked diffy comin that's a take on something else on the market and won't know how it's gonna work till it's here. Could be amazing..... :cool:
 
minnesnowta,
stonemonkey55

stonemonkey55

Chief Vapor Officer
Manufacturer
Personally I think the current heater cover with the blazemaster bowl will be the best set up in terms of getting a good seal while still being able to easly remove the wand from the bowl.

I do like the gong heater cover I currently have but the gong connction actUally is a bt frustrating then the incorrect gong connection comes undone.
 
stonemonkey55,
Hanibal Lectin

Hanibal Lectin

Well-Known Member
Accidentally left mine on for 2 hours,used it,unplugged it and the inner glass next to the coil cracked when it was cooling.In hindsight,should have turned the heat down slowly and then un plug it....its delicate....dont like...maybe sell
 
Hanibal Lectin,
stonemonkey55

stonemonkey55

Chief Vapor Officer
Manufacturer
Hanibal - that should be covered under warranty.. Most likely the heat coil around the ceramic heating element could have prevented that, I am not 100% sure, either way, contact them and a replacement should be sent out.
 
stonemonkey55,
Hanibal Lectin

Hanibal Lectin

Well-Known Member
yeah mine does have the coil wire.
I wasn't sure what email to use so I just replied to the one they sent me when I bought it.
 
Hanibal Lectin,
HerbalSquirrel

HerbalSquirrel

IckyStickyStuff
... Just ordered mine! :) Can't wait to try this out.

Has anyone had experience with shipping to EU - ? How long would that usually take :) ^^

-- btw - where do you guys store your wand when not in use? I'm looking for a nice case with foam that isn't too expensive. Anyone know something?

Thnx.
 
HerbalSquirrel,
S

stevebeast

Well-Known Member
i have seen some camera cases that will hold the vrip and a small bong. i use one of these just enough room for the vhw and the gong attachments.
http://shortyusa.com/index.html?RID=4328

ps mine stay on all night all i ever do is turn off the powerstrip, i have also dropped them, dropped one in coffe when hot, spilled stuff on them.
 
stevebeast,
S

stevebeast

Well-Known Member
sorry i dont know why my link wont pull the item up look uner accesories and trype in "case" in the search the hard cases are on page 2
 
stevebeast,
Hanibal Lectin

Hanibal Lectin

Well-Known Member
Good to know others leave theirs on for long periods...must have just been defective glass.
I'm am going to be sent a new heater cover.
 
Hanibal Lectin,
E

extremevape420

Well-Known Member
Hey fc, im looking for something new and was wondeing if anyone in the toronto area knew any local shops that sell the vriptech heat wand, thanks.
 
extremevape420,
UrDoinItWrong

UrDoinItWrong

Well-Known Member
Mine is on for at least 15 hours a day, usually cranked full, no probs here.

I just can't stop breaking my damn lower bowl!!! Any blazemaster full converts want to get rid of their Vriptech 14.4 lower bowls, please send me a pm as I would love to buy it!! I just broke my 2nd one! I keep a backup thankfully. ;)
 
UrDoinItWrong,
minnesnowta

minnesnowta

Vaporist/Glass Head
I'll have one in a week or two to move. It's the glass pinch design but I probaly won't move it till I have my new one in hand.
 
minnesnowta,
UrDoinItWrong

UrDoinItWrong

Well-Known Member
Oh sorry if I wasn't clear... I mean the Vriptech brand lower bowls. Most people with blazemaster bowls say they prefer using their blazemaster over using the stock factory vriptech lower bowl, so I figure someone wouldn't mind getting rid of their Vriptech one. So yeah, that's the version I'm interested in, haha.

----> http://www.vriptech.com/Merchant2/m...R&Product_Code=VCBLB_14_4mm&Category_Code=VHW

I would just like to not spend 30 bucks + ship a 3rd time, lol, less would be nice. I hope I'm not breaking a forum rule by asking this here! :)
 
UrDoinItWrong,
You must log in or register to reply here.
Top Bottom