The Mighty/Mighty+ by Storz & Bickel

Teedub

Teedub

Well-Known Member
biohacker said:
The intake is a long metal tube no? I don't think anything (including vapour) could survive the heat in there. I've abused Mighty's for over a year using mostly inverted....never an issue...all at 210c.
Click to expand...

I agree nothing should build up in the metal tube but you've seen the vapor coming out the bottom intake though yeah? Surely if it's coming out it's leaving residue and It's gonna get sticky in the lower plastic intake where I doubt the heater will burn it off. I'm thinking more that dust and shiz will get in the plastic intake port and stick in there. Minor I know but ocd, and someone had it blocked on here as well.
 
B

biohacker

Well-Known Member
Good point @ Teedub, although i've used both of my previous Mighty's inverted nearly exclusively with a Muzzmod and never had any intake issues. It does suck not being able to fully clean and service ourselves. And yeah pretty much every time I invert I see that puff of vapour coming out of the INtake! But it's usually when I allow "heat soak" and conduction takes over. Makes for some very appealing glass eye candy!

For those wanting to use concentrates, there are separately sized pads for the capsules. I would just put a bit of shatter in a sandwich though, although with the CU and the Mighty only reaching 210c, I think alot of the concentrate will condense in the CU.
 
vapviking

vapviking

Old & In the Way
Bomb33 said:
From my experience I'm in the same boat as you. No one really has chimed in. I asked what the liquid capsules were all about? Still don't know. So I've tried making a liquid capsules with a liquid pad inside a capsule and with bad results. Either I used too much or?? I'm just paranoid about it getting in the burner. That's why I think the sandwich method is the best method all round. Once I get my second mighty I'm going to be experimenting more with the shatter. I have a high tolerance and plain strain just ain't cutting it. So I order Kief separate now and make sandwiches in capsules for now. Also my liquid pads are so big they don't even fit in the bowl. Unless I force it? How u suppose to use it lmao. Just enjoy the mighty high it gives you lol.
Click to expand...
There are two sizes of liquid pad; one for the chamber and one that fits the capsules.
I have no experience with shatter or concentrates except occasional reclaim or honey oil from reclaim. I find those will liquify and permeate the oil pad. Most gets vaped but the pads have to be cleaned often (not easy to be thorough) and some will build up in chamber over time. I tend to prefer a sandwich method, in the chamber, for those things (or kief). Flower absorbs and holds stuff together, so I think easier to clear out afterwards. Second choice to sandwich is a wrap of the gooey in small piece of (pure) cotton ball.
I do think all of these (oils, concentrates, forms of hash) will be maintenance/cleaning issues - or worse - over time if used a lot. Just my take here, but I'm glad I'm more of a bud purist, which is what Mighty is best at. I don't mind smell and love flavor of bud.
 
Bomb33

Bomb33

Well-Known Member
Ya if I could I would have the bubbler setup already but I got two young ones and paraphernalia and smell don't help. People see just the mighty and think nothing of it. Just an e cig. Lol thanks for clarifying the concentrates. I think I'll stick with the kandy pen for shatter and reclaimed material. Aside from all the sandwiches I've been making in the caps. I'm home again today. Looking for some accessories lol. Just bought that glass mouthpiece. Any other things that will make the mighty mightier! Come summer I'm going all in and setting up some kinda water. All you guys got me itching to try. I know it's going to be like once you go black you never go back. So scared that the water will ruin what me and the mighty have now lol
 
B

biohacker

Well-Known Member
Water is great, don't get me wrong....the only way I really love using the Mighty is with a Muzzmod and heatsoak. However, with the cooling unit being so effective, IMHO with this vape it's not even really necessary to use water unless you have sensitive airways or are always using the max temp. Everyone is different, however this is one vape that has basically built in cooling!
 
Bomb33

Bomb33

Well-Known Member
I hear you. But I don't think too many people's lungs can handle the mighty at 210 with no water. I get what your saying. I'm managing just find without water. But to have that option would be nice. To be able to handle the mighty at its fullest is what I'm wanting to try. I come from fast quick convenient hits from a pipe so this mighty is like an angel in disguise.
 
B

biohacker

Well-Known Member
Many people can't handle 210c from the start, but when temp stepped up from 185/190 it actually isn't too bad. So you're right, and that's when my muzzmod comes into play....FULL BOWL to the brim, 210c, 30 second heat soak, and bomb's away!

Here is a vid from about a year ago using the SonG with a .1g bowl that I crushed in one rip. And speaking of rip, the glass piece in that vid can now R.I.P! :lol: It died when it met the ceramic floor a couple of nights ago!

 
vapviking

vapviking

Old & In the Way
Bomb33 said:
Stop it. Lol I am going to get one today. That budgie bubbler looks sick. How come I haven't seen it before? Makes me want one real bad now.
Click to expand...
are you in US?
I got a (new) knock off of Pinnacle pro Wt from a guy on ebay for about $23 + ship. He doesn't seem to have them atm, but you might look around.
 
Bomb33

Bomb33

Well-Known Member
Shitty. I'm canadian. You say pinnacle pro ? I will look it up. It don't matter if it's in the US. Unless it's ridiculous for shipping. By the looks of it. Water is the only other way to go. But is the extreme q whip and the tiny bubbler the way to go? What was that budgie bubbler attachment,? And how much lol.
 
Mr. Me2

Mr. Me2

Well-Known Member
Bomb33 said:
Ya if I could I would have the bubbler setup already but I got two young ones and paraphernalia and smell don't help. People see just the mighty and think nothing of it. Just an e cig. Lol thanks for clarifying the concentrates. I think I'll stick with the kandy pen for shatter and reclaimed material. Aside from all the sandwiches I've been making in the caps. I'm home again today. Looking for some accessories lol. Just bought that glass mouthpiece. Any other things that will make the mighty mightier! Come summer I'm going all in and setting up some kinda water. All you guys got me itching to try. I know it's going to be like once you go black you never go back. So scared that the water will ruin what me and the mighty have now lol
Click to expand...
I think you should look at @Ratchett's website for some Mighty accessories.
 
rvp5032

rvp5032

Well-Known Member
Bomb33 said:
From my experience I'm in the same boat as you. No one really has chimed in. I asked what the liquid capsules were all about? Still don't know. So I've tried making a liquid capsules with a liquid pad inside a capsule and with bad results. Either I used too much or?? I'm just paranoid about it getting in the burner. That's why I think the sandwich method is the best method all round. Once I get my second mighty I'm going to be experimenting more with the shatter. I have a high tolerance and plain strain just ain't cutting it. So I order Kief separate now and make sandwiches in capsules for now. Also my liquid pads are so big they don't even fit in the bowl. Unless I force it? How u suppose to use it lmao. Just enjoy the mighty high it gives you lol.
Click to expand...
I've used honey concentrates with just the pad and there was no mess leftover at all. Not sure how shatter would be as I've never used that though.
 
lazylathe

lazylathe

Almost there...
@biohacker So the bubbler finally broke for good! LOL! That was a good one for you!
If you need a new piece i have some unused ones you may like? Let me know!

So i ma finally a Mighty Family Member!!
She arrived last night, fully charged, cleaned and ready to go!
Tried to dosing capsule and it seems to work really well but found it cashed the bowl a lot quicker, more conduction i think. ABV was nice and dark though.
Still prefer to load the bowl and hit it from 195 up to MAX.

Looks like it is S&B shopping time as well!
Need an oil pad for small loads and a couple of cooling units, will mod one for WT use.

@Teedub If you want to prevent the back flow of vapor down the tube while using a WT, try this!
Load up your Mighty and set the temp.
Use a MuzzMod or an @Ratchett SonG adapter, place this in your WT.
When Mighty has buzzed and reached your preferred temp, allow to heat soak if that is your style.
Slowly start inhaling on your bubbler and then attach Mighty to WT.
Remove to clear the hit and continue in this fashion.
This tech prevents the back pressure that cause the vapor to travel in reverse!

Just tried it for my Sick As A Dog Wake and Vape Day Off Work with some Bruce Banner!
The Mighty can milk my large RooR tube, No Problemo!!
 
Blackfriars

Blackfriars

Connoisseur of cannabis
Good morning.

How does the Mighty fare with respect to its battery lives and its power connector, esp. relative to the Crafty?

I have returned my Crafty to S&B for a second time due to poor battery performance and a faulty/shorting USB connection and am wondering if trading up to a Mighty (assuming S&B will let me) will solve these two problems. What I do *not* want is a Crafty x 2 with two faulty batteries that hold little charge after 4 months or so of good use and another USB connector that fizzles in and out all night.

Thank you.
 
Baron23

Baron23

Well-Known Member
I just wanted to say that I continue to absolutely love my Mighty. Its a cinch to use. To me, its so refined that there isn't that much to talk about wrt it! LOL

I tend to run at 385 F as a compromise between lower temp taste and density of vapor. I may change my mind about it later, I often do, but for now its working just fine.

Also, still loving my 2qan stand for the Mighty from @nenmayk! Beautiful and completely functional accessory.
 
vapviking

vapviking

Old & In the Way
Blackfriars said:
Good morning.

How does the Mighty fare with respect to its battery lives and its power connector, esp. relative to the Crafty?

I have returned my Crafty to S&B for a second time due to poor battery performance and a faulty/shorting USB connection and am wondering if trading up to a Mighty (assuming S&B will let me) will solve these two problems. What I do *not* want is a Crafty x 2 with two faulty batteries that hold little charge after 4 months or so of good use and another USB connector that fizzles in and out all night.

Thank you.
Click to expand...
Do the upgrade and you won't be disappointed. Act quickly and make the inquiry before they just automatically send you a replacement Crafty! If your current return is covered by warranty, then they will let you upgrade for small fee.
The new Mighty's warranty won't extend any longer than the one from the original Crafty purchase.
 
Bomb33

Bomb33

Well-Known Member
How is the bruce banner? I'm waiting on some lol. Thanks for the technique on the wt. I'm looking for a wt like someone suggested the pinnacle. Or something like it?
 
Blackfriars

Blackfriars

Connoisseur of cannabis
vapviking said:
Do the upgrade and you won't be disappointed. Act quickly and make the inquiry before they just automatically send you a replacement Crafty! If your current return is covered by warranty, then they will let you upgrade for small fee.
The new Mighty's warranty won't extend any longer than the one from the original Crafty purchase.
Click to expand...

I wish I had placed a note in my RMA package back to California but I have since left two notes on the RMA system S&B uses asking to upgrade to the Mighty. I believe S&B wrote to me there it will consider my request but I have not yet received an invoice. S&B is probably waiting to ascertain my Crafty is in fact under warranty.

Thank you.
 
ChooChooCharlie

ChooChooCharlie

Well-Known Member
Baron23 said:
I just wanted to say that I continue to absolutely love my Mighty. Its a cinch to use. To me, its so refined that there isn't that much to talk about wrt it! LOL

I tend to run at 385 F as a compromise between lower temp taste and density of vapor. I may change my mind about it later, I often do, but for now its working just fine.

Also, still loving my 2qan stand for the Mighty from @nenmayk! Beautiful and completely functional accessory.
Click to expand...

@Baron23 -- Here's my nod of agreement in run-on sentence form: The Mighty is so easy to use, I find myself drifting off and just gazing at its modular design, separated by those vertical slits, almost like a new high rise building in miniature, especially now as the 2qan does its aluminum tap dance version of "Me and My Shadow," ready to swivel and stand for its Mighty master wherever and whenever needed, except on the porcelain ledge of the sink when taking a piss, which is not a good idea on so many levels.
 
lazylathe

lazylathe

Almost there...
Bomb33 said:
How is the bruce banner? I'm waiting on some lol. Thanks for the technique on the wt. I'm looking for a wt like someone suggested the pinnacle. Or something like it?
Click to expand...

It was very Stoney and almost sent me back into a death sleep for a bit but I fought it off and feel good!!

The pinnacle is a hydra tube so I out will have water balancing above your Mighty...
Not sure how happy I would be doing this daily...

I would recommend starting with something like this:
http://www.dhgate.com/product/2014-...dcage/214701656.html#s1-4-1b;searl|1858654498
 
Baron23

Baron23

Well-Known Member
ChooChooCharlie said:
@Baron23 -- Here's my nod of agreement in run-on sentence form: The Mighty is so easy to use, I find myself drifting off and just gazing at its modular design, separated by those vertical slits, almost like a new high rise building in miniature, especially now as the 2qan does its aluminum tap dance version of "Me and My Shadow," ready to swivel and stand for its Mighty master wherever and whenever needed, except on the porcelain ledge of the sink when taking a piss, which is not a good idea on so many levels.
Click to expand...
hehehe...good one, almost like a Dennis Miller rant! LOL
 
Bomb33

Bomb33

Well-Known Member
So I'm taking your advice. Going down to some local shops to see what is out there lol. So if I get that how am I hooking it to the mighty? So many options and suggestions.
 
Bomb33,
  • Like
Reactions: shredder
B

biohacker

Well-Known Member
lazylathe said:
@biohacker So the bubbler finally broke for good! LOL! That was a good one for you!
If you need a new piece i have some unused ones you may like? Let me know!
Click to expand...

It was a good one for her! lmao! She won't use any other water tool, because of that huge flared mouthpiece. This was a brand new Weedstar, remember the last one with the broken but repaired mouthpiece from PV, that one bit the dust a long time ago! I'm still perfectly happy with my Blaze Bubbler clone!

lazylathe said:
Tried to dosing capsule and it seems to work really well but found it cashed the bowl a lot quicker, more conduction i think
Click to expand...

I found that it cached way faster too, and way thinner clouds, but it could just be due to a smaller amount. I actually thought using the capsule was more convective! Have you tried plopping in the capsule when it gets to temp?

lazylathe said:
Still prefer to load the bowl and hit it from 195 up to MAX.
Click to expand...

Me too! Anything less than 190c isn't worth it for me....but with water usually right to the top!

lazylathe said:
Need an oil pad for small loads and a couple of cooling units, will mod one for WT use.
Click to expand...

No need bro, you can keep the one you fixed for me! I still have muzzmod parts for another, and I don't really use the Mighty anymore since the GH.

lazylathe said:
Slowly start inhaling on your bubbler and then attach Mighty to WT.
Remove to clear the hit and continue in this fashion.
This tech prevents the back pressure that cause the vapor to travel in reverse!
Click to expand...

But the vapour puffs out the intake as soon as you invert the Mighty! Doesn't bother me though..

lazylathe said:
The Mighty can milk my large RooR tube, No Problemo!!
Click to expand...

VIDEO please! And do you consider my video with .1g to be "milk"? I think everyone has different defintions of milk around here. I think my Mighty video is very wispy skim milk IMO.

Looking forward to hearing more of your feedback dude! Sorry to hear that you are under the weather, but happy that you have some relief with your awesome strains and the Mighty!
 
nenmayk

nenmayk

Well-Known Member
Accessory Maker
Baron23 said:
I just wanted to say that I continue to absolutely love my Mighty. Its a cinch to use. To me, its so refined that there isn't that much to talk about wrt it! LOL

I tend to run at 385 F as a compromise between lower temp taste and density of vapor. I may change my mind about it later, I often do, but for now its working just fine.

Also, still loving my 2qan stand for the Mighty from @nenmayk! Beautiful and completely functional accessory.
Click to expand...
thanks for the luv
ChooChooCharlie said:
@Baron23 -- Here's my nod of agreement in run-on sentence form: The Mighty is so easy to use, I find myself drifting off and just gazing at its modular design, separated by those vertical slits, almost like a new high rise building in miniature, especially now as the 2qan does its aluminum tap dance version of "Me and My Shadow," ready to swivel and stand for its Mighty master wherever and whenever needed, except on the porcelain ledge of the sink when taking a piss, which is not a good idea on so many levels.
Click to expand...
very visual wordz :D ,lovit
 
You must log in or register to reply here.
Top Bottom