AegonT

Well-Known Member
@AegonT if you don't want to sand it down, try rubbing walnuts on the scratches. The oil will help make the scratches disappear. If you do choose to sand start with a high grit, 220 or above, and sand with the grain lightly. The best results will come from being patient and making many passes, not quickly removing material. Once you get the scratches out, lightly sand the whole thing and refinish the entire log instead of trying to get one spot to match the rest. If you choose to sand you might want to consider covering the heater with masking tape to block particles from getting in there.

Thank you. Not sure if I fancy sanding it, I will give the walnuts a try first.
 
Last edited:

hweezi

formally cwheezy
Japr1M9.jpg


So the lighter ABV is vaped at 6.5, and that's honestly the darkest I seem to be able to get it at that point on the dial. The darker bunch below is what my nano can give my at 7.5. I've never combusted on that and it gives me nice thick vapor. Am I getting all I need at 6.5, I don't really notice much taste difference, other than theres a lot more tasty draws than one big tasty draw. Maybe that's just the nano magic, so is it just preference?

I've just notice a lot of you have yours set at 6.5 so I was just wondering.

Also, my dial goes to 11, but I can't go past 10, what's up with that ?
 

Pjake

It's all in the reflexes.
Japr1M9.jpg


So the lighter ABV is vaped at 6.5, and that's honestly the darkest I seem to be able to get it at that point on the dial. The darker bunch below is what my nano can give my at 7.5. I've never combusted on that and it gives me nice thick vapor. Am I getting all I need at 6.5, I don't really notice much taste difference, other than theres a lot more tasty draws than one big tasty draw. Maybe that's just the nano magic, so is it just preference?

I've just notice a lot of you have yours set at 6.5 so I was just wondering.

Also, my dial goes to 11, but I can't go past 10, what's up with that ?
I always assumed it was a Spinal Tap reference.
 

Eyedunno

Well-Known Member
Japr1M9.jpg


So the lighter ABV is vaped at 6.5, and that's honestly the darkest I seem to be able to get it at that point on the dial. The darker bunch below is what my nano can give my at 7.5. I've never combusted on that and it gives me nice thick vapor. Am I getting all I need at 6.5, I don't really notice much taste difference, other than theres a lot more tasty draws than one big tasty draw. Maybe that's just the nano magic, so is it just preference?

I've just notice a lot of you have yours set at 6.5 so I was just wondering.

Yeah, mine gets closer to the bottom ABV at 6.5. You might just have a nano that runs a bit cooler. What's your screen distance?

Also, my dial goes to 11, but I can't go past 10, what's up with that ?
 

AJS

Calm Consistency
Japr1M9.jpg


So the lighter ABV is vaped at 6.5, and that's honestly the darkest I seem to be able to get it at that point on the dial. The darker bunch below is what my nano can give my at 7.5. I've never combusted on that and it gives me nice thick vapor. Am I getting all I need at 6.5, I don't really notice much taste difference, other than theres a lot more tasty draws than one big tasty draw. Maybe that's just the nano magic, so is it just preference?

I've just notice a lot of you have yours set at 6.5 so I was just wondering.

Also, my dial goes to 11, but I can't go past 10, what's up with that ?

Dial number means basically nothing. My 7 will almost combust and my 5.5 is darker than your 6.5.
Lower temps yellow/dark yellow your herb, medium temps dark yellow/brown, and higher temps brown/dark brown. I always use this as a reference instead of using numbers, but people really like saying their numbers so idk ....
Lower temps are more euphoric and heady effects.
Higher temps are more sedative and intoxicating.
The choice is yours.
 

BabyFacedFinster

Anything worth doing, is worth overdoing.
Dial number means basically nothing. My 7 will almost combust and my 5.5 is darker than your 6.5.
Lower temps yellow/dark yellow your herb, medium temps dark yellow/brown, and higher temps brown/dark brown. I always use this as a reference instead of using numbers, but people really like saying their numbers so idk ....
Lower temps are more euphoric and heady effects.
Higher temps are more sedative and intoxicating.
The choice is yours.

I'll take sedative almost every time. I like sedative. :smug:

That being said, I learned that 6.25 is at my high end limit. I had been using that setting with my gong for the longest time. Recently I dropped it a bit lower to straight 6. I found more flavor and aroma at 6. 6.25 starts to give me a slight roastiness flavor which masks any fruity flavors. I also found decent clouds at straight 6. I think I have found a new favorite setting. :spliff:

I have had good flavor on the stem at 5.75, but then I don't like the stem half as much as the gong on water. My throat gets dry on the stem. Daddy don't like that.
 

ataxian

PALE BLUE DOT
I'll take sedative almost every time. I like sedative. :smug:

That being said, I learned that 6.25 is at my high end limit. I had been using that setting with my gong for the longest time. Recently I dropped it a bit lower to straight 6. I found more flavor and aroma at 6. 6.25 starts to give me a slight roastiness flavor which masks any fruity flavors. I also found decent clouds at straight 6. I think I have found a new favorite setting. :spliff:

I have had good flavor on the stem at 5.75, but then I don't like the stem half as much as the gong on water. My throat gets dry on the stem. Daddy don't like that.
Normally I like 6.0 on my disal.

Tonight 6.5 was perfect!

GDP is such sleep medicine!

Why does the NANO taste so good?

Do you think the large sack of colas has some effect?
 

CarolKing

Singer of songs and a vapor connoisseur
Not all cannabis require the same temp. I adjust my temp gauge down if my vapor is too harsh. If I'm not getting enough flavor I turn my temp up. I'm anywhere from 5.75 - 6.50, a 1/10 of a degree makes a difference. I always use a slow and steady draw.
 

Frostiestone

Well-Known Member
One Sunday night kief bowl to "break" a tolerance break... then another week of testing! 7.2 is my temperature now, the milk is unreasonably creamy! Like 2%? Gotta clean my basket...things are getting chuggy, and I know its not the D020-d...
 

AJS

Calm Consistency
Not all cannabis require the same temp. I adjust my temp gauge down if my vapor is too harsh. If I'm not getting enough flavor I turn my temp up. I'm anywhere from 5.75 - 6.50, a 1/10 of a degree makes a difference. I always use a slow and steady draw.

Agreed completely. Temps constantly differ depending on the herb. And the smallest differences can be huge.
 

BabyFacedFinster

Anything worth doing, is worth overdoing.
We males have 2 heads!
Use the right head not your hands!

Big Colas during the day!

Even larger ones at night!

6.0 - 6.5 is the level that works for me.

Find your sweet spot!

I'd love to have a big ol' cola to pluck nugs off of. I once had a bud that was almost an eighth in size. It's gone know. I killed it.

I'll take my big colas at night please. Damn yeah @ataxian

I just don't know about that stem. Even at low temps you can't possibly have the same cooling effect as water?

I figure 2 sessions a night, that's a total of at least 4 bowls, at 4 hits per bowl, I'm vaping at around 16 times a night. Even for the beneficial properties of the bud, that's a lot of puffing. I think I'm going be hooked on hash when it comes around. :nod:
 
Last edited:

ataxian

PALE BLUE DOT
I'd love to have a big ol' cola to pluck nugs off of. I had a bud that was almost an eighth in size. It's gone know. I killed it.

I'll take my big colas at night please. Damn yeah @ataxian

I just don't know about that stem. Even at low temps (and I like the sedative effect of high temps) you can't possibly have the same cooling effect as water?

I figure 2 sessions a night, that's a total of at least 4 bowls, at 4 hits a bowl, I'm vaping at around 16 times a night. Even for the benficial properties of the bud, that's a lot of puffing. I think I'm going be hooked on hash when it comes around. :nod:
I don't want to give the wrong impression however I Love cannabis more than most people.

This cola of GOD'S GIFT was big!

These colas of GDP are even larger.

CANNABIS is so HOLY!
THE GRAIL makes the NANO glow!

I have SHATTER pretty clear however no HASH?
 
Last edited:

howie105

Well-Known Member
I have had luck with this stem and down to .025g set between 6 and 6.5 on the dial. Gives me about two tasty hits.

On a side note I followed these steps to post a photo but it resulted in three copies of the picture appearing in the post. Any idea where I went astray?
  1. Go to http://imgur.com
  2. Click the Upload Images button and then browse your computer
  3. Select the photo you want and click OK or Open
  4. Click the Start Upload button and wait until the upload completes
  5. Copy the code in the Linked BBCode (message boards) field
  6. Paste the code you just copied into your post on fc
Modnote: Here is the picture you tried to display
NndBamD.jpg
 
Last edited by a moderator:

Stu

Maconheiro
Staff member
I have had luck with this stem and down to .025g set between 6 and 6.5 on the dial. Gives me about two tasty hits.

On a side note I followed these steps to post a photo but it resulted in three copies of the picture appearing in the post. Any idea where I went astray?
  1. Go to http://imgur.com
  2. Click the Upload Images button and then browse your computer
  3. Select the photo you want and click OK or Open
  4. Click the Start Upload button and wait until the upload completes
  5. Copy the code in the Linked BBCode (message boards) field
  6. Paste the code you just copied into your post on fc
Modnote: Here is the picture you tried to display
NndBamD.jpg
I'm not sure what you were doing wrong, but I took the liberty of inserting the image into your post above. I suggest playing around with pictures in the sandbox to see if you can resolve the triple post issue.

:peace:
 

Vapor_Eyes

taste buds
The only thing is I wish I had some concentrates to try in the nano. I only have access to flower and then only a few strains.

I only had sporadic access to concentrates before I saw this thread:
http://fuckcombustion.com/threads/rosin-technique-easy-diy-solventless.17470/

A quick trip to Walmart and less than $40 was all it took. In 15 minutes, with no previous experience, I made 3 dabs, each from a unique strain.

Be careful though, it's kind of addictive once you start. The E-Nano and concentrates are a match made in heaven.

To those asking about temp, I've gone as high as 9.5 with a steel pad in the dry stem. The hits were surprisingly smooth but the taste of the metal was way too strong for my liking. I'm usually in the 7-7.5 range for cotton and 8-8.5 for steel.
 

hweezi

formally cwheezy
I only had sporadic access to concentrates before I saw this thread:
http://fuckcombustion.com/threads/rosin-technique-easy-diy-solventless.17470/

A quick trip to Walmart and less than $40 was all it took. In 15 minutes, with no previous experience, I made 3 dabs, each from a unique strain.

Be careful though, it's kind of addictive once you start. The E-Nano and concentrates are a match made in heaven.

To those asking about temp, I've gone as high as 9.5 with a steel pad in the dry stem. The hits were surprisingly smooth but the taste of the metal was way too strong for my liking. I'm usually in the 7-7.5 range for cotton and 8-8.5 for steel.

Tonight I've had my Nano at 6 and I've been packing decent size bowls probably .3 but I bumped the screen up a little bit. It kinda made me think of rosin presses and stuff like that because looking at my gong I can just see the oil coming out of the herb. It's pretty neat, and the hits are so damn tasty, I don't know why I haven't really done this. Just makes it so fun to use. Just feels like a nicer buzz too.
 
Last edited:
Top Bottom