Discontinued The Persei Vaporizer for herbs and concentrates.

itschad

Well-Known Member
Whats it look like when you pop your top cap off? can you see anything? or is it just a solid cake of wax? it should be the latter


EDIT: sorry didnt mean to double post the live refresh thing threw me off
 
itschad,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
I get a dull LED when using an 18350


i discovered also that if the herc is not all the way screwed into the persei, i can hold it in a certain position and get the full brightness


Hmm what do you do to fix the issue until it happens again?
 
THC SCIENTIFIC,

caporoot

Vapor > Smoke
Whats it look like when you pop your top cap off? can you see anything? or is it just a solid cake of wax? it should be the latter


EDIT: sorry didnt mean to double post the live refresh thing threw me off
I can see the melted concentrate within the ti coil.

When I heat it up, it just bubbles, it's like its heating up the outer shell and heating/bubbling the concentrate but the rod isn't hot enough to produce vapor?

If that makes sense ..
 
caporoot,

Caligula

Maximus
I can see the melted concentrate within the ti coil.

When I heat it up, it just bubbles, it's like its heating up the outer shell and heating/bubbling the concentrate but the rod isn't hot enough to produce vapor?

If that makes sense ..

What do you mean you can see it within the coil? Like you can see the coil but it looks "wet"? YOu shouldnt be able to see the coil bur rather a shallow pool of oil and the rod sticking up in the middle (if you have 1 coil, the pic below is with an older, larger coil)

Basically it should look like this + the top part of your ceramic rod:

q6d6.jpg
 

Vape Dr.

Well-Known Member
Hello fellow FC'rs! :shrug:*****I NEED YOUR HELP!********:hmm:
I am about to pull the trigger on a persei.
Vapeworld.com has the persei T1 for $165.99 plus 20% off for mothers day.
Blazedepot.com has the older "double barrel" setup for $139.99
Which is a better kit? Sarah at vapeworld said they have the older persei models in the warehouse and the new T1 model.
We figured it out, I can either get the new T1 which I read has a capacity of only .3, or the older delta9 model with the (2) .5 cartridges.
I can get the delta9 persei and the T1 KISS cart for $148 from vapeworld shipped. I wanted to know is there any differences in the batteries supplied, or anything I don't know?
If I got the older delta9 with the KISS cart would I be ok? (I'll be using it for oils, dabs, and wax)
I like the capacity of the delta9 being 3 times the T1 when used with the "double barrel", but have never tried it myself!
Is the T1 an improvement over the delta9 in any way but the KISS cart?????? Or just a new top.
Please give me any feedback you may have, I want to know FCs opinion of the 2.
Also if it will work properly (batteries) If I get the delta9 and a separate KISS cart.
I'm thinking the delta9 "double barrel" with an additional KISS cart. Am I better this way or is the Kiss cart super amazing and the delta9 a pain in the ass because of having to fill it with the funnel and what not?
Please! Anyone! Inform me of what you know before I commit. I an new to vaping EOs. Was going to get the Luna, but I'm not sure which direction TeT is heading, and if their products are up to the same standards as when Noah worked there.
Please be as in my face as possible! Act as is I know nothing! I want your unbiased opinion PLEASE!
FC members are the only people I trust.
This dude abides by FC!
Thank you all in advance for all your help :tup:
Happy Mothers Day to all you Moms out there!:rockon:
 
Vape Dr.,

caporoot

Vapor > Smoke
What do you mean you can see it within the coil? Like you can see the coil but it looks "wet"? YOu shouldnt be able to see the coil bur rather a shallow pool of oil and the rod sticking up in the middle (if you have 1 coil, the pic below is with an older, larger coil)

Basically it should look like this + the top part of your ceramic rod:

q6d6.jpg
Oh I started like this but every time I filled this much it would just leak out the bottom holes and I refuse to clean it and recollect the fallen concentrate every 2nd day.

This is what I'm talking about.. Trial and error galore lol
 
caporoot,
  • Like
Reactions: Caligula

mutten840

Well-Known Member
Vape DR, I just got the Persei TI from w9 and THC Scientist has a 20% off coupon in his signature:
20% off use coupon code ILIKEUPTECH. Personally I would buy directly from W9 as this way you will be getting the latest and greatest model. The reason I went with the newer version over the older is the titanium kiss cart. I rocks!!!! Also I have heard lots and lots of horror stories about the learning curve on loading the older version carts. The kiss cart is right there and when you feel it is time to clean. Drop it in some ISO and let it soak. Also you can rebuild it!!!! I got the matte silver and it is SEXY!!!! This is just my take as a new Persei owner and why I ended up going the route I did.
 

masaki

Well-Known Member
Vape DR, I just got the Persei TI from w9 and THC Scientist has a 20% off coupon in his signature:
20% off use coupon code ILIKEUPTECH. Personally I would buy directly from W9 as this way you will be getting the latest and greatest model. The reason I went with the newer version over the older is the titanium kiss cart. I rocks!!!! Also I have heard lots and lots of horror stories about the learning curve on loading the older version carts. The kiss cart is right there and when you feel it is time to clean. Drop it in some ISO and let it soak. Also you can rebuild it!!!! I got the matte silver and it is SEXY!!!! This is just my take as a new Persei owner and why I ended up going the route I did.
The new silver persei is very sexy :luv: I want to see the silver persei with ss kit.
 
masaki,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer

How about this, you tell me exactly what you want to accomplish and I'll tell you what route to take.

Is your end goal the Hercules sr74? Or kiss cartridge? You plan on running the Bender ?
 
THC SCIENTIFIC,

Mynameismud

Accessory Maker
Accessory Maker
As @THC SCIENTIFIC alluded to. If you don't plan on getting a bender or Hercules you can go with the cheaper alternatives. They will work with both the Ti kiss and old cartridges...

If you do plan or might want a herc or bender both are great options... I would probably suggest the old model and just add a Ti kiss with it.
 
Mynameismud,

Vape Dr.

Well-Known Member
How about this, you tell me exactly what you want to accomplish and I'll tell you what route to take.

Is your end goal the Hercules sr74? Or kiss cartridge? You plan on running the Bender ?
@THC SCIENTIFIC, I am looking for a great portable vape for oil, dabs, maybe wax. I want the best portable, no extra attachments, just a stellar portable oil/dab vape for on the go. I'm hearing good things about the persei with the kiss cartridge.
@Mynameismud, are the units the same, just different batteries?
 
Vape Dr.,

Severmore

Well-Known Member
What surface finish do you guys find to be the most resistant to wear and tear? (ie scratches...etc)

Silver or the colored versions? I ask because my black omi mini scratched a little when in a pocket with my keys.

Edit...also, if I pick up a persei, can I use batteries that I have for my Luna (Sony 18650 VTC5s) to operate at 3.7V? Moreover, what rod for the SR-74 would you recommend...black or white. I usually consume an ethanol extracted concentrate of hard shatter consistency.

Thanks to all of you for re-answering these questions...much appreciated.
 
Last edited:
Severmore,

Vape Dr.

Well-Known Member
What surface finish do you guys find to be the most resistant to wear and tear? (ie scratches...etc)

Silver or the colored versions? I ask because my black omi mini scratched a little when in a pocket with my keys.
@Severmore, excellent question. Which finish is more durable, or are they all the same?
 
Vape Dr.,
  • Like
Reactions: Severmore

Vape Dr.

Well-Known Member
As @THC SCIENTIFIC alluded to. If you don't plan on getting a bender or Hercules you can go with the cheaper alternatives. They will work with both the Ti kiss and old cartridges...

If you do plan or might want a herc or bender both are great options... I would probably suggest the old model and just add a Ti kiss with it.
@Mynameismud I want to get the best EO vape I can for right now. But I want a quality unit. I'm sure in a few weeks after I get it I will be getting attachments as I become more familiar with the unit.
As I said, this is unchartered territory for me.:hmm:
That's why I'm looking to all you for your input and help.

PLEASE GIVE ME YOUR :2c: EVERYONE. I THANK YOU IN ADVANCE!
 
Vape Dr.,

masaki

Well-Known Member
@Mynameismud I want to get the best EO vape I can for right now. But I want a quality unit. I'm sure in a few weeks after I get it I will be getting attachments as I become more familiar with the unit.
As I said, this is unchartered territory for me.:hmm:
That's why I'm looking to all you for your input and help.

PLEASE GIVE ME YOUR :2c: EVERYONE. I THANK YOU IN ADVANCE!
I like the new silver persei! IMO the persei/hercules combo is the best portable oil vape! Others may disagree because it's not a compact setup but I think it's more discreet then a kiss cart having to load and reload per hit makes it more noticeable for me and a pain in the butt. The hercules/persei is my go to oil pen
 

215z

Well-Known Member
I'm having @caproot issue. If I load it heavy like in @Caligula picture, the oil splatters in my mouth, and most of it ends up sliding into the bottom chamber rather than ending up in my lungs. Please help me make this work, because there isn't anything better out there.
 

gudiss

Well-Known Member
The Hercules burns though oil quickly if you let it and you can start hitting the buffer load without knowing it.

The buffer is NOT meant to be vaped from. When you start vaping off the buffer the hits become intermittent and start to taste burnt after a while. If this occurs, you then need to reload what you vaped out of the buffer THEN add more to vape on top of that. If you aren't adding extra to make up for this, you will hit the buffer even sooner... and this becomes a no win cycle of fail as your operating time within "optimal" gets shorter and shorter with each reload.

Just a thought as to what might be happening.

Basically, if you remove the top cap and you can see your coil then you need to add more concentrate.
very well said!
 
gudiss,
  • Like
Reactions: Caligula
Top Bottom