Cheap High Quality Bubbler
- Thread starter Bleezy
- Start date
-
- Tags
- cheap bubbler glass
olivianewtonjohn
Well-Known Member
mmenzie
My friends call me "Menz"
i have that exact piece and got it from that store (there are 5 minutes from my workplace) its a nice piece but my only gripe is (and this maybe other peoples gripe as well) is that when male to male adapter, nail, and globe are in place... its higher than the mouthpiece is so you have to make your eye's "look upward" while you are dabbing your oil. i don't like the "strain" it causes me
axakal
Well-Known Member
kingofnull
ace
Anyone know of a US/CDN shop that sells that GG inline to tree?
Vaporisateur
Senior Marijuanist
kingofnull
ace
Strange that I never noticed that before. Thanks Vaporisateur.
edit: damn $169?! Pass.
edit: damn $169?! Pass.
Roger D
Vapor Wizard
Anonymouse
Sith I care
I don't see why all that guy's mouthpieces need to look like bent, uncut wangs with two cock-rings installed.
I guess that's just personal taste, though, but I find his pieces ugly in general. For that money, I'd rather get something from Colie or JhanPixel/AEON.
Vaporisateur
Senior Marijuanist
Just received my Bent 10-Arm Bubbler from brotherswithglass.com.
First impressions > Damn this thing is tiny!
Secondly, the perc has not been installed straight inside. Not a big deal, I am picky but still. See close-up pic below.
But you know what? After using quite a bit tonight I think I really like it. It's perfect with the Inhalater for sure. SEE MILKSHOT THREAD FOR VIDEO.
First impressions > Damn this thing is tiny!
Secondly, the perc has not been installed straight inside. Not a big deal, I am picky but still. See close-up pic below.
But you know what? After using quite a bit tonight I think I really like it. It's perfect with the Inhalater for sure. SEE MILKSHOT THREAD FOR VIDEO.
tepictoton
Well-Known Member
I have a bent raven bubbler and it's perc is well aligned, yours seems of a bit, but only slightly.
I do believe smoketown.de is a wholesale shop...
I do believe smoketown.de is a wholesale shop...
Anonymouse
Sith I care
It does say "Bent", right on the tin. 
$un
Well-Known Member
Saw this one earlier in the thread and then saw that it was just like the vapor brothers vape bubbler and couldn't resist any longer so I just ordered it for $51 shipped.
Should be here in a couple days and I will post a video and full review. Looking forward to this one!
are you still enjoying your bubbler? would you recommend it? i am thinking about getting the same one to use with the solo. is it a pain to clean?
axakal
Well-Known Member
they sell to private customers, too. they seem to be a branch of neardark, which is a wholesale shop.
arrr
Well-Known Member
I am enjoying pairing the infamous bub with the solo. I have a PVHE Turbo gong from PV that i use. I have not been able to get large clouds but i do get heavily medicated and the taste is great. I have not had to clean it yet and i do see some tan build up on the bub but it does not look like it will be hard to clean.
$un
Well-Known Member
i am going for the exact same setup like you. what size gong did you get? the 18mm? with the gong & bub do you experience any draw resistance? would you recommend me getting a clip for the mouth piece? did you just get the turbo or shorty turbo?
arrr
Well-Known Member
I got the regular turbo gong (it was a pain to get the screen in there but once i finally got it in i haven't had any problems since.
I am pretty sure my infamous came w/ a clip for the mouthpiece.
I am not sure if i am not milking the infamous properly as i get much larger clouds with the stem not using water but i still get really medicated.
Another note is if you put crushed ice in the bub it makes it taste so much better.
$un
Well-Known Member
what size gong do you think i should get the 18mm? i am new to all these glass pieces & don't know much about the mm sizes. are you sure the clip comes with the mouthpiece? because i was about to place my order then saw that the clip was out of stock & i didn't want to pay for shipping twice. why does the mouth piece come in two pieces instead of one solid piece? used my solo for the first time last night with water pipe & got even more medicated for some reason. good thing you told me about the ice, i was wondering that too. what methods do you use to crush your ice? i find myself trying to make as little noise as possible late at night trying to crush ice for my piece lol
arrr
Well-Known Member
[quofringe un, post: 374655, member: 13491"]what size gong do you think i should get the 18mm? i am new to all these glass pieces & don't know much about the mm sizes. are you sure the clip comes with the mouthpiece? because i was about to place my order then saw that the clip was out of stock & i didn't want to pay for shipping twice. why does the mouth piece come in two pieces instead of one solid piece? used my solo for the first time last night with water pipe & got even more medicated for some reason. good thing you told me about the ice, i was wondering that too. what methods do you use to crush your ice? i find myself trying to make as little noise as possible late at night trying to crush ice for my piece lol[/quote]
My frige has an ice crusher. Get 18mm if going to use with the infamous bub. I am not home ATM but if i remember i will check on the clip
My frige has an ice crusher. Get 18mm if going to use with the infamous bub. I am not home ATM but if i remember i will check on the clip
filteredhead
Well-Known Member
That pipesdaddy bub has a 18mm female connection for the vaporizer to plug into and the 18mm GonG will work directly in it. I actually purchased the 14mm GonG with a 18mm-to-14mm reducer adapter between the GonG and bub's 18mm joint (that's the glass adapter pictured on the right, ignore the one on the left for this discussion).
$un
Well-Known Member
That pipesdaddy bub has a 18mm female connection for the vaporizer to plug into and the 18mm GonG will work directly in it. I actually purchased the 14mm GonG with a 18mm-to-14mm reducer adapter between the GonG and bub's 18mm joint (that's the glass adapter pictured on the right, ignore the one on the left for this discussion).
oh cool so ill order the 18mm. its so hard to find them in stock though, its always out of stock. whenever possible do you think you can take a picture of the inside part where the screen goes? i am very curious to see what the inside of it looks like since on pv they don't have any detailed pictures.
Quetzalcoatl
DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
ALWAYS go 18 if you have the choice to. You can't open a 14mm any more than that, even if you get a 14 to 18 adapter the 14 will always be the bottleneck. Get an 18, slap a low-pro 18 to 14 adapter, and you're good. Then you have the option to take it out and have 18. Make sense?
Frederick McGuire
Aggressively Loungey
Nope, doesn't make sense when talking about the solo.
For a free flowing vape like the LSV or cloud (or dabbing) an 18mm joint should provide more airflow, but with the solo, the bottleneck isn't at the joint, it's inside the solo.
The airflow difference between a 14, & 18mm stem, if any, is negligible.