badmrfrosty
Well-Known Member
Is there any advantage to having it that way or is it just aesthetics?
TinyMight / TM 2
- Thread starter kuzko
- Start date
badbee
Well-Known Member
I have that stem and yes they wiggle a little bit when clean. This is necessary to give them some room for expansion when they get hot.
badmrfrosty
Well-Known Member
Good to know, thanks!
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
There are some alternative cooling stems that have fixed cooling pieces, but pretty much all the pearl and pill stems rattle (to varying degree) just how they're made
sickmanfraud
Well-Known Member
Be in touch with Tinymightvapes. They will sell you the glass pieces you need.
Unfortunately they only sell the glass for the upper part but not the one that is surrounding the heater…
Tinymight
Tinymight: TinyMight Wasserfilteradapter - TinyMight 2 Vaporizer - TinyMight roter Ersatz O-Ring - TinyMight 1 inneres Glasteil - TinyMight Bubbler - TinyMight Dosierkapsverdampftnochmal.de
Wile.E
Member
Sorry
gangababa
Well-Known Member
Contact https://tinymightvape.eu/
They likely can meet your needs as they do say this on their accesories page, "If you need some spare part which is not listed here, please contact our customer support to verify ."
sickmanfraud
Well-Known Member
I have to shout out to @Shit Snacks for giving me the idea to try low temp vaping with my Tinymight2s.
I started out at number one on the dial and went up a half number with each hit. I could not believe the visible vapor on one!
I am not someone who "appreciates" the taste of cannabis, but vaping at low temperatures makes it "less offensive" and I even have a couple of strains that taste kind of nice, go figure.
This past Thursday I had a small dose of green dragon tincture in my system, and I vaped starting from the lowest possible temperatures and I was forced to go lay down. That was from one stem with the Tinymight 14 mm WPA and an ash catcher/j-hook setup.
Admittedly this is not a solution for 100% of the time. There are times when I want high temp indica for severe pain and/or sleep.
If you have the time, give this a try, you will be glad you did.
I started out at number one on the dial and went up a half number with each hit. I could not believe the visible vapor on one!
I am not someone who "appreciates" the taste of cannabis, but vaping at low temperatures makes it "less offensive" and I even have a couple of strains that taste kind of nice, go figure.
This past Thursday I had a small dose of green dragon tincture in my system, and I vaped starting from the lowest possible temperatures and I was forced to go lay down. That was from one stem with the Tinymight 14 mm WPA and an ash catcher/j-hook setup.
Admittedly this is not a solution for 100% of the time. There are times when I want high temp indica for severe pain and/or sleep.
If you have the time, give this a try, you will be glad you did.
Hoodwink
Member
Looks great! Where’d ya get it?
Got myself a stopper for my TM2 from Azzwood. Keeps my TM free from dog hair and fluff. Bonus, also looks great
Wozz
Well-Known Member
From https://www.azzwoodcustoms.co.uk
I'm finding it proper handy.
I'm not sure that they are listed on his site atm, he is quick to respond , and a decent guy to email though
I was thinking damn you after seeing that ... now Ill have to get one too!!!From https://www.azzwoodcustoms.co.uk
I'm finding it proper handy.
I'm not sure that they are listed on his site atm, he is quick to respond , and a decent guy to email though
Its already been answered but thought id chime in (i made those stems for those that dont know). Yea a bit of rattle is necessary, if the glass is in contact with other parts it can create stress, partially due to the shrinking and expansion as it is heated and cooled when making, and also having glass touching other glass can make “tags” which can reduce the integrity of the piece due to incomplete welds or sharp angles.
For example the spikes should never touch each other or any other part of the glass.
If the terp pills were to be fixed, you would need to come up with a clever way of fully fusing the connection so there are no acute angles. Not an easy task. I try my best to minimise wiggle room as you dont want them to rattle about so much they can break a spike or the screen, but yea, they need a little space.
As mentioned once they are a little dirty they stop rattling.
Hope you like the stem! I mainly love them for the reduction in draw resistence. With a the straw method to fill the stem getting lungfuls is a breeze imho.
kiddvudu2
Well-Known Member
So, a couple of sessions in with this beauty and I'm starting to get the hang of it. I absolutely love the look, and potential of not having to take a glass stem out and about (although, so far so good with my dynavap orion carrying case and 4 regular rotation glass stems). However, so far I haven't been able to get nearly as much vapor through it versus a glass terp-pill or beaded style stem. But, man it looks so nice....
Wozz
Well-Known Member
On your photo the airport is closed.So, a couple of sessions in with this beauty and I'm starting to get the hang of it. I absolutely love the look, and potential of not having to take a glass stem out and about (although, so far so good with my dynavap orion carrying case and 4 regular rotation glass stems). However, so far I haven't been able to get nearly as much vapor through it versus a glass terp-pill or beaded style stem. But, man it looks so nice....
I'm guessing that you have tried with it open?
Are you using the reclaim filter? I found it better without.
Just got my @VaPeD&CoNfUsEd WPA and it is stunning. I always struggle to photograph glass so it is much prettier in person. It's also very solid and literally perfect.
I was already picking up one of his dab tools and asked for a matching TM WPA. He turned it around super quick and it was so inexpensive I said he should raise the price. The dab tool is nicest one I own now, but is less relevant to this thread
I was already picking up one of his dab tools and asked for a matching TM WPA. He turned it around super quick and it was so inexpensive I said he should raise the price. The dab tool is nicest one I own now, but is less relevant to this thread
kiddvudu2
Well-Known Member
Well, when I first received the wooden sleeve I hadn't yet received my Revolve Gen 2 cooling unit, and also didn't have any Gen 1 reclaim filters, but I was eating quite a bit of herb that way. Since receiving the Gen 2 setup, I've only used it with a filter so far. Maybe with that 2nd cooling unit now, the filter isn't as necessary. I'll try removing it.
As far as the airport goes, I haven't opened it up with the Gen 2 either. I did try it with the Gen 1 setup, but was probably reluctant to inhale very hard due to the herb bits that were making it through to my mouth. I'll give that a try as well and report back with any interesting info.
Peese!
Last edited:
jbm
Well-Known Member
I have this stem and it’s the best one I’ve used yet for just this reason. Excellent cooling, draw resistance is perfect. Highly recommend.
triskelion
Member
Vaporific
All who wander are not lost...
Better snug than loose. Along with my OG TM, I may bring a few Hopper silicone sleeves to Key West in September to share my TM. Sharing is caring
. I have a bunch of them (and 2 working Hoppers). This is a great idea! It won’t be the first time I’ve brought my TM to Key West either. 