The Angus Halogen Vape by YLL Vape

[RedZep]

I spent my first evening with Angus last night and the first thing I'll say, is this device can fuck, and fuck hard.

I'm personally finding performance without the dosing caps to be much better than with them; clouds off the hop rather than whispy pulls as you wait for it to bring the extra metal to temp. I'd imagine batt life would be better without them too as you'd not be wasting the additional energy to heat them. Personally, I find the restriction pretty spot on; I experimented with covering the intake holes some, but I find it milks just fine without doing that. With a brand new set of Molicels, I charged them inside the Angus with a 5V, 2A charger, and it was charged in about an hr and 45 minutes, though it did show as partially charged on brand new batteries. The heatup time feels a tad long at first but once its at temp, it can just power through a bowl. I was way over-doing my bowls at first. Like another user said, if you have it at max temp, you can kill a bowl in 3 pulls probably.

Beyond performance, my initial impressions of the build quality are highly positive: its weighty, sturdy, and inspires all kinds of confidence in the hand. As yet, I'm struggling hard to find any reason why any serious ted enthusiast wouldnt own one at the price of $200. Its a no brainer. Even if bulb replacement ends up being a hassle (and it doesnt sound particularly easy due to internal temp sensor wiring), with a 2k hr bulb life and crazy strong internals for drops, it shouldnt need it for a good long time.

If anyone is on the fence and has specific questions, now's the time.

Are you able to raise the MP without touching the mouth end. Maybe by sticking something down the gap and raising it?

If not, I can see this really pissing me off.

 

[BingsBuddery]

Are you able to raise the MP without touching the mouth end. Maybe by sticking something down the gap and raising it?

If not, I can see this really pissing me off.

Oh for sure, easy. Just slide a tool down the center of the mouthpiece and raise it up.

 

[Goatts]

When MP is closed: Yes you could use a toothpick or dab tool or something like that to stick into and raise the glass mouthpiece. Or you can slide your thumb over the rounded metal swivel MP part and 1/2 raise the glass part for better access. This technique would work better with a bit of knurling on the metal swivel.
I also added a 1" section of silicone tubing prophylactic over the glass MP. Helps when raising the mast ..... ahem

 

[Pukka]

@YLLVAPE OFFICAL I'm just gonna come out and say it, I'm really turned off by the name Angus, the steer raised for good eating. Yeah, it's also an old Scottish name, but that's now how the market is receiving/viewing it.
I will catch the usual shit for being 'pro life' in the meat department, but I've been dealing with those defensive lashes since the 70's. It's been interesting to see those criticisms evolve and dissolve over the decades.

Angus was my sainted maternal grandpa's name, I think it's a fine name that any extraction device should be proud to own.

 

[RedZep]

Angus was my sainted maternal grandpa's name, I think it's a fine name that any extraction device should be proud to own.

Makes me think of this guy personally...

 

[vapeape77]

If I only charge my batteries externally I shouldn’t be as worried about the CE rating stuff, correct?

Also if someone doesn’t mind running a somewhat dried full nug in their Angus at 180c, would love to hear if it pulverizes it like a Mighty does.

 

[BingsBuddery]

If I only charge my batteries externally I shouldn’t be as worried about the CE rating stuff, correct?

Also if someone doesn’t mind running a somewhat dried full nug in their Angus at 180c, would love to hear if it pulverizes it like a Mighty does.

It would, no problem, but I fail to see why anybody does whole nugs, kind of goes against efficiency.

 

[vapeape77]

It would, no problem, but I fail to see why anybody does whole nugs, kind of goes against efficiency.

I know it’s totally counterintuitive, but when I run say Dutch Treat whole nug in a Mighty vs grinded medium to fine the terp profile seems to be better preserved when taking hits…. Plus I really don’t care about efficiency of the batteries since replaceable and cost of using more weed is not a worry here. The one downside with whole nugs in vapes that can handle, reduced air flow, but I prefer some resistance over wide open air like you can get in a tm with fine grind and loose pack.

 

[BingsBuddery]

I know it’s totally counterintuitive, but when I run say Dutch Treat whole nug in a Mighty vs grinded medium to fine the terp profile seems to be better preserved when taking hits…. Plus I really don’t care about efficiency of the batteries since replaceable and cost of using more weed is not a worry here

Totally fair and tbh you've got me a little curious about the profile. Ill try it out and report back.

 

[vapeape77]

Totally fair and tbh you've got me a little curious about the profile. Ill try it out and report back.

Thanks man, it might not be for you… try something with berry or lemon flavor if you have any

 

[RedZep]

Are we expecting some more user reviews tomorrow then?

Seems UK and USA can buy now.

 

[Easywider]

Canada as well, I just got tracking from Soothing Vapours. The wheels are in motion

 

[Shit Snacks]

Have to touch MP with hands to get access (nightmare for germaphobes or anyone living in a city who don't fancy putting random viruses or bacteria or piss soaked fingers on something going into our mouths

Um, maybe wash your hands??
Carry something so you don't have to touch other things and can keep your hands clean, don't use it when they're not...?

Are you able to raise the MP without touching the mouth end. Maybe by sticking something down the gap and raising it?

If not, I can see this really pissing me off.

Clearly, pissing off all over yourself!

Seriously though, couldn't you turn up the mouthpiece, by grabbing the bottom half of it that is closer to the connected joint to flip, the part that it is going to be far away from your mouth at the tip??

 

[BingsBuddery]

Um, maybe wash your hands??
Carry something so you don't have to touch other things and can keep your hands clean, don't use it when they're not...?



Clearly, pissing off all over yourself!

Seriously though, couldn't you turn up the mouthpiece, by grabbing the bottom half of it that is closer to the connected joint to flip, the part that it is going to be far away from your mouth at the tip??

OCD is a very real condition and a mental prison for some. You'd do well not to belittle people over it.

 

[666Honeybadger]

Are you able to raise the MP without touching the mouth end. Maybe by sticking something down the gap and raising it?

If not, I can see this really pissing me off.

But if you worry about touching it putting something in it also sounds iffy to me, no?
Couldn't you just slide a rubber band (or something similar) under it (far enough down the glass to avoid the tip) and then raise it by pulling the band?
Or find a dedicated cap for the mp (that's even better since it also avoids dirt entering the open stem-end)...

 

[RedZep]

But if you worry about touching it putting something in it also sounds iffy to me, no?
Couldn't you just slide a rubber band (or something similar) under it (far enough down the glass to avoid the tip) and then raise it by pulling the band?
Or find a dedicated cap for the mp (that's even better since it also avoids dirt entering the open stem-end)...

I was thinking more sliding a tool down the side. MP cap also good idea.

 

[Texus]

Well there we are again. Overzealous picking apart of new products to the extent that I wonder why a manufacturer would ever want to participate in these forums.

A photo of a certificate of conformity seemingly necessary to assuage members' zeal to pick a device apart and suspicions that YLL would mark it without obtaining actual certification?

Assumptions of air vent related flaws in the absence of any actual evidence in the device itself. Blown up into "massive flaw" by @RedZep replying to accusations and assumptions by @vapeape77 who has never touched the device. News flash: this isn't the HR Edge.

Have we seen any evidence at all that manufacturer isn't responsive to user feedback? Heck these early releases were in large part due to wanting to incorporate any last important feedback before a larger run.

And doesn't @VGOODIEZ have a good enough track record at vetting manufacturers?

I don't get it. Yeesh people. I am here for a supportive environment where impressions and tips form actual users can be shared and where there is a possibility of discussion with manufacturers and a way to provide them our valuable feedback.

Think about the kind of community your comments are contributing to.

 

[BingsBuddery]

I was thinking more sliding a tool down the side. MP cap also good idea.

Yeah, you can fit a thin tool down around the side of it, I just tried it. @YLLVAPE OFFICAL: Some knurling on the articulating piece that holds the glass is a great suggestion by @Goatts.

EDIT: Unfortunately, I have to agree with @Texus. Reading the constant, hyper-critical, quick-to-accuse, type comments in this thread has been offputting, to say the least. Unless you are ready to outright accuse Chinese manufacturers of being duplicitous accross the board, you should probably shrink back into the darkness and quiet down a little.

 

[Grass Yes]

A photo of a certificate of conformity seemingly necessary to assuage members' zeal to pick a device apart and suspicions that YLL would mark it without obtaining actual certification?

Did you not see the counterfeit CE mark on the vape? It was even present in "laboratory testing" photos. I think claiming certification is reason enough to ask for verification. It is literally the reason that certification exists. I do not understand why that is a bridge too far.

And doesn't @VGOODIEZ have a good enough track record at vetting manufacturers?

I love Vgoodiez. I buy from them all the time. However they have worked with bad vendors in the past and even recommended bad vapes (hello Herbie v2). They are a great part of our community but they are not infallible. I think a business should be judged as a business.

Think about the kind of community your comments are contributing to.

I want a community where we have a healthy discussion of real trade-offs. I don't think it is good to choose a team and root for your vape without complaint. We are customers and enthusiasts, not cultists.

 

[Shit Snacks]

OCD is a very real condition and a mental prison for some. You'd do well not to belittle people over it.

Apologies to any I offended, that was not my intent, certainly not trying to belittle anyone, just poking fun at the words used and issue as it was presented... I actually suffer from aspects of it myself along with fairly severe anxiety, so I have the same concerns being listed, despite my tongue in cheek jokes, I was also suggesting serious solutions

 

[endof3d]

Think about the kind of community your comments are contributing to.

,
Feels like there is a full court press of negative energy that good people are succumbing too. Seeing it in other threads and else where as well.
"must be the season of the Witch!"

 

[BingsBuddery]

Apologies to any I offended, that was not my intent, certainly not trying to belittle anyone, just poking fun at the words used and issue as it was presented... I actually suffer from aspects of it myself along with fairly severe anxiety, so I have the same concerns being listed, despite my tongue in cheek jokes, I was also suggesting serious solutions

No offence personally, I have loved ones afflicted by bad OCD/Germaphobia and I just felt compelled to speak. I appreciate your response, thank you.

 

[Zuhdj]

,
Feels like there is a full court press of negative energy that good people are succumbing too. Seeing it in other threads and else where as well.
"must be the season of the Witch!"

it's probably all the vaporents coming over here before their haven gets banned like entexchange did

 

[checkyourlibido]

OCD is a very real condition and a mental prison for some. You'd do well not to belittle people over it.

I recently reached out to Shit Snacks when I wasn't mentally feeling up to posting publicly. You see, I have my own issues. Either way, Shit Snacks was very helpful and kind. Personally, I didn't know that RedZep had OCD, I'm 100% sure Shit Snacks would not purposefully belittle anyone for their health.

@RedZep I didn't know you were diagnosed with OCD. I don't have any idea what you are going through, but I hope you find a solution that works.

Edit: adding that I usually carry alcohol spray with me everywhere I go. But yeah, that doesn't kill everything.

 

[Abele Rizieri Ferrari]

Have to touch MP with hands to get access (nightmare for germaphobes or anyone living in a city who don't fancy putting random viruses or bacteria or piss soaked fingers on something going into our mouths)

You could slap something like an oring around it like halfway and then pull the mp out using that.