Dynavap VapCap

[thunderstealer1337]

that is a 6" gnarly stem from sneakypete, about $20-25

Gnarly Stem For DynaVap

The Gnarly Stem is a serious looking stem that provides serious cooling action. The Gnarly Stem is made from a clear thick glass that is a full 6" in length for huge vapour path extension. It features a broad glass nipple pattern to disrupt the flow of the vapour and further increase the length...

www.sneakypetestore.com

it has a carb hole too, it hits verrrrrrrrry niiiiiiiiiice

 

[RustyOldNail]

that is a 6" gnarly stem from sneakypete, about $20-25

Gnarly Stem For DynaVap

The Gnarly Stem is a serious looking stem that provides serious cooling action. The Gnarly Stem is made from a clear thick glass that is a full 6" in length for huge vapour path extension. It features a broad glass nipple pattern to disrupt the flow of the vapour and further increase the length...

www.sneakypetestore.com

it has a carb hole too, it hits verrrrrrrrry niiiiiiiiiice

Looks a bit like the DV BB9, without stuck BALLS. I’ll get a clear one of those, and retire my two BB9’s. Thanks.

 

[thunderstealer1337]

stuck blueballs nonetheless

you cant use it with wpa is its downfall - natively, but i love watching vapor get pulled through it

 

[Jill NYC]

I’m not really sure why, but it makes me feel much better when Dynavap is the reigning champion of threads (aka largest) on the site.
Just feels like home.

Hey @stark1 - you okay? Haven’t been seeing you around much these days.

 

[NYC_Frank]

Just wanted to welcome DV back to it's old and rightful home with an old favorite of mine from @antispleen

 

[fatbiker]

It feels so good to be back!

I recently acquired my first IH and it has elevated the Dynavap experience to a WHOLE new level. I enjoy it much more. The heating is so consistent. If you haven't tried one I would highly recommend you do.

 

[stark1]

Hi, Jill. Somehow the old forum colors seemed more attractive than the new? Lighter. Brighter.

Also, been chawing some nugs to give lungs a break from vaping.

Stay healthy.

 

[BabyFacedFinster]

Looks a bit like the DV BB9, without stuck BALLS. I’ll get a clear one of those, and retire my two BB9’s. Thanks.

They also sell the Jazz model that has its own sticky balls. Also has 2 carb holes too? Looks complicated.

The Jazz Stem for DynaVap

Sneaky Pete says: Like a Saxophone and soulful New Orleans blues, the Jazz Stem adds silky-smooth coolness to your DynaVap sessions. This is the most sophisticated glass stem currently available. It is six inches long and features carbs at both ends, close to the tip and close to the mouthpiece...

www.sneakypetestore.com

I thought about the gnarly too. But I already have the xl hula. Still, all that glass looks just stunning. I'd probably break it within a week.

Right now I've been rockin my @Rabid Kiwi wood stem. I just love that light, open bore wood stem. Sadly, I just learned that his production is being shut down. He still has a few stems for sale on his site.

 

[fatbiker]

For those of you who run your Dynavap through a water pipe which is your favorite?

I am using my Simrell through my dab rig but would prefer a dedicated glass piece for it. This will be on my desk in my office so I'm looking for something stable and small. 14 or 10MM female joint required.

 

[BabyFacedFinster]

For those of you who run your Dynavap through a water pipe which is your favorite?

I am using my Simrell through my dab rig but would prefer a dedicated glass piece for it. This will be on my desk in my office so I'm looking for something stable and small. 14 or 10MM female joint required.

@fatbiker, @DDave's water wand is a classic.

The VapCap CUSTOM Glass Waterwand V2

NOW IMPROVED!Ground glass connector slightly larger to accommodate more styles of water pipes.Top of wand Custom Finished. Strengthened and refined.A complete VapCap Glass body replacement that fits inside your Dube Tube and also connects directly to your 14mm Water Pipe (18mm w/optional...

www.ddavemods.com

 

[RustyOldNail]

@fatbiker, @DDave's water wand is a classic.

The VapCap CUSTOM Glass Waterwand V2

NOW IMPROVED!Ground glass connector slightly larger to accommodate more styles of water pipes.Top of wand Custom Finished. Strengthened and refined.A complete VapCap Glass body replacement that fits inside your Dube Tube and also connects directly to your 14mm Water Pipe (18mm w/optional...

www.ddavemods.com

I’d buy one in second, unfortunately for me I have to have a “carb hole”, in any wand I use. For most, probably not an issue, but something to be AWARE of.

 

[Moses Baca]

Dynavap BB9 is the only wpa I'm aware of that has a carb.

 

[Mono Loco]

I’d buy one in second, unfortunately for me I have to have a “carb hole”, in any wand I use. For most, probably not an issue, but something to be AWARE of.

Can't a hole be drilled into a glass stem with a proper carbide-tipped glass-cutting bit? There are all sorts of tutorial videos showing this. It would be nice to flame-polish a hole after drilling, but I don't know how the heat would affect the overall tempering/annealing of the glass piece (if at all?). I wonder if a re-hot nail could be used to massage the inner diameter of a drilled hole in order to melt/smooth the raw cut edge ... would it be hot enough?

 

[RustyOldNail]

Can't a hole be drilled into a glass stem with a proper carbide-tipped glass-cutting bit? There are all sorts of tutorial videos showing this. It would be nice to flame-polish a hole after drilling, but I don't know how the heat would affect the overall tempering/annealing of the glass piece (if at all?). I wonder if a re-hot nail could be used to massage the inner diameter of a drilled hole in order to melt/smooth the raw cut edge ... would it be hot enough?

Let me know how it works out!
There are enough alternative choices with carbs, but hey if one has the tools, time, and ability to drill tiny, smooth holes in a glass wand,.....

 

[Jill NYC]

Dynavap BB9 is the only wpa I'm aware of that has a carb.

For glass, possibly.
But plenty of wood WPA’s with air port (I.e. Hydrovong, nonovong, etc)

 

[Moses Baca]

All from Dynavap. What else?

 

[Jill NYC]

I know some of Ed’s TNT stems have the air port. i am sure there are others as well since many wood stems can also double as WPA’s.
Personally, I don’t like having carb for water - too many things to keep track of.

 

[Moses Baca]

I thought of Ed first and checked his website but didn't see anything listed. I'm sure he or one of our other custom makers could easily add a hole.
But yeah, no carbs for me, either. I blocked them on my M's.

 

[Jill NYC]

I was thinking stuff like this, that can be used with a mp or as a WPA:

DynaVap MidSection 45mm - Ed's TnT

DynaVap MidSection 45mm from Ed's TnT, add some flare or contrast to your DynaVap Vaporizer, grab yours now!

edstnt.com

 

[BabyFacedFinster]

All from Dynavap. What else?

Well, sneakypete has the devil's pitchfork.

The Devil's Pitchfork For DynaVap

Sneaky Pete says: DOUBLE the capacity and the power of your DynaVap experience with our Devil's Pitchfork glass stem. Made of thick glass, each stem perfectly fits TWO stainless steel or titanium DynaVap tips. The dry version features the cooling nipples of our Hula and Hula XL stems with the...

www.sneakypetestore.com

Meant to give you a 2 tip double whammy, but use one tip and you have a large carb hole.

Now if you absolutely must use 2 tips and still want a carb. There is the third hole of the Triple Crown.

Triple Crown Adapter For DynaVap

Sneaky Pete says: Our hard core users love the Devil's Pitchfork, which allows you to use two DynaVap tips at once. How do we take this concept further? How about three tips?!!! Built utilizing strictly the purity of glass, the Triple Crown Adapter will allow you to hit three different tips at...

www.sneakypetestore.com

A little too much excitement for my delicate disposition.

 

[Moses Baca]

Thinking outside the box...nice!

 

[thunderstealer1337]

anyone else buy a BID bundle from dynavap?

special link that was emailed out - you just had to be a subscriber

Thank you for being a subscriber to the DynaVap Newsletter! Please enjoy early access to the 3 x Brand New Bundles for our 2020 Battery Independence Day Sale! Also, enjoy Free Shipping on the Bundles, just in case you would like to buy more items in our upcoming 20% off sale (beginning Tuesday, June 30). You also have access to the Special Edition, Celebrate Freedom PhantoM!

* BID Pre-Sale Bundle offer valid 6/25/20 thru 6/29/20 at 3:00PM CDT. BID Sale 20% off offer valid 6/30/20 thru 7/5/20 at 11:59PM CDT.

 

[TommyDee]

I got the Mega Bundle flyer. What was the BID Bundle? ..MID bundle? The Omni XL with the free kit to go with it?

 

[Mono Loco]

"Battery Independence Day" Pre-sale has three bundles:

Mini Bundle = (1) 2019 M Pantom w/engraved Flag on Cap + (1) 2020M + (1) Slim Stash ... $109.00

Midway Bundle = (1) Omni XL starter Kit w/DynaCoil + (1) Black Travel Case + (1) DynaStash w/ABV storage ... $209.50

Mega-Bundle ... ugh ... too much to list =check it out here: Got an extra $419 for "stuff" ???

... the special Phantom 2019M is availablr for $60 a-la-carte !

 

[stark1]

Funny how DynaVap is sticking to its guns, and holding back on marketing its
DV-IH. (They do have one, you know)

While I admire its “Battery Free” slogan, I have to wonder how many $$
DV loosin, while others are amassing (yuge) $ALES with their induction heater for VapCaps.

A lot of interest in an induction heater produced in-house by DynaVap.
A bit of lost revenue.

(What the hay, DV have been selling induction heaters made by a secondary satellite these last few
months, why not market “The DynaVap Induction Heater”, Made by DynaVap!)