E-Nano from Epickai
Baron23
Well-Known Member
Since you don't need for travel, how about a wooden box. Sometimes you can find nice wooden boxes with latches at craft stores like Michaels. You can get the spongy filler and just cut to fit. Cut out slits with a sharp tool for your vapes and accessories. This is basically what I do. I have one that looks like a treasure box.
I've bought various camera cases for travel away from home. It doesn't always block out the smell if I have a dirty vape. I travel with my cannbais in a wooden box in a bag. There is no smell.
Glad to hear you're figuring out your new vape tool.
Edit
I thought I posted this but I didn't, so here is my treasure chest.
Very nice chest, Carol. Very nifty.
By the by, I believe it was you who suggested a rubber band around the temp dial to keep it from being so easy to inadvertently move. Worked great (worked a treat! Love that phrase). Thanks again.
vape4fun
Active Member
Is it possible to pack super micro one big hit, dump and reload. I had barely any in there last night and still got 4 pulls. Love to do big green pull and dump out and repeat. Pushing screen close to top and putting tiny amount in or is this not a thing that's possible or smart???
flotntoke
thoroughly vaped
Can't believe you're just trying the nano. Welcome aboard! It is the long running favorite for me!
You can, but it it tricky. Just barely cover the screen. Also a good idea to lower the heat a bit and get it as close as possible without touching. Only bad thing about this method is that you get so stoned so quickly that it is hard to keep up with the reloads.
vape4fun
Active Member
Thanks for advice I brought this guy out last night to a get together and it blew everyone away. "What's this little thing"? I explain how it works guy inhales blows out a monster cloud and was like what the hell is this thing??!!
Ha ha so efficient so bloody efficient! Another guy ordered one on the spot! I think I should be the east coast Nano sales representative....bring it around to people's places for demos like Tupperware parties!
Ha ha so efficient so bloody efficient! Another guy ordered one on the spot! I think I should be the east coast Nano sales representative....bring it around to people's places for demos like Tupperware parties!
Last edited:
CalyxSmokr
Well-Known Member
Unfortunately I can't say the same thing. Notes I left on my orders were ignored, my emails were ignored, and even my pms got no interest. I was sent items I did not want and overcharged for shipping. Seems intentional tbh.
Baron23
Well-Known Member
Wow, this is extremely different from the service I received on my recent Enano order. I found Epic to be epic in their CS and Carissa was always very timely and responsive in her replies (emails).
I'm so sorry you had this experience! Was this a Black Friday order? Not making excuses for them, but I think a lot of these small companies get a bit overwhelmed at times like these.
How long has it been since you emailed them? I always got a response and the response was always very accommodating.
CalyxSmokr
Well-Known Member
yeah, I was surprised. It was a black friday order.
I emailed 3 separate times and sent clear messages in my order notes.
Disappointing for a company I used to recommend to those looking at a first vape.
I know. I wasn't expecting this
flotntoke
thoroughly vaped
Finally picked up a stando with the recent Epic sale. It arrived on my doorstep today.
I LOVE it! Why oh why did I wait so long to get one? Works great and looks so good with my nano sitting in it, adorned by a few GonGs, my Epic stash tin and another tin I had that fit well in the other spot.
I LOVE it! Why oh why did I wait so long to get one? Works great and looks so good with my nano sitting in it, adorned by a few GonGs, my Epic stash tin and another tin I had that fit well in the other spot.
beiberhole69
Sexual Maven
Man, I was all set to sell my eNano, but Carisa and the EpicVape customer service is so awesome, I don't know if I can let it go.
If I do get rid of it. I'll prob get another sometime down the road.
If I do get rid of it. I'll prob get another sometime down the road.
Baron23
Well-Known Member
Just curious....why would you want to sell it? Like another vape better? No longer vape? Huh?
beiberhole69
Sexual Maven
Many factors all weighing in. Too much to list really. It's a super vape and awesome company though. If I do part with it, I'll miss it.
flotntoke
thoroughly vaped
If you get another - go custom wood. It costs a bit more, but totally worth it. Snappo has some great blanks that make great nanos.
My plan was to get custom and sell one of my older ones. But, just can't do it! One is for travel (and lives at my alt weekend address) and just too attached to my first one to let her go.
My plan was to get custom and sell one of my older ones. But, just can't do it! One is for travel (and lives at my alt weekend address) and just too attached to my first one to let her go.
BT Bean
Bredda Gravalicious
Last week I posted a song I wrote about my new Vapman, and I’ve felt guilty ever since. I mean, my sweet Nano was barely 2 months old and here I was writing songs about other vapes. So to make amends with my main squeeze, here is my song about the Nano. Hope you like it.
Da E-Nano (To the tune of “Da Do Ron Ron”)
I got it on a Monday and my heart stood still
Da E-Nan Nano Da E-Nano
Someone on the forum showed me how to fill
Da E-Nan Nano Da E-Nano
Yeah, my heart stood still
Yeah, the stem was filled
Then, when I took a hit
Da E-Nan Nano Da E-Nano
I knew what I was doing and I got real high
Da E-Nan Nano Da E-Nano
It looked so tiny but my oh my
Da E-Nan Nano Da E-Nano
Yeah, I got real high
Yes, oh my, oh my
Then when I took a hit
Da E-Nan Nano Da E-Nano
I turned it up to seven and it hit so fine
Da E-Nan Nano Da E-Nano
If I had some hash I’d turn it up to nine
Da E-Nan Nano Da E-Nano
Yeah, it hit so fine
Yes, I’d turn it up to nine
Then when I took a hit
Da E-Nan Nano Da E-Nano
Da E-Nano (To the tune of “Da Do Ron Ron”)
I got it on a Monday and my heart stood still
Da E-Nan Nano Da E-Nano
Someone on the forum showed me how to fill
Da E-Nan Nano Da E-Nano
Yeah, my heart stood still
Yeah, the stem was filled
Then, when I took a hit
Da E-Nan Nano Da E-Nano
I knew what I was doing and I got real high
Da E-Nan Nano Da E-Nano
It looked so tiny but my oh my
Da E-Nan Nano Da E-Nano
Yeah, I got real high
Yes, oh my, oh my
Then when I took a hit
Da E-Nan Nano Da E-Nano
I turned it up to seven and it hit so fine
Da E-Nan Nano Da E-Nano
If I had some hash I’d turn it up to nine
Da E-Nan Nano Da E-Nano
Yeah, it hit so fine
Yes, I’d turn it up to nine
Then when I took a hit
Da E-Nan Nano Da E-Nano
hoyo77
Well-Known Member
I took advantage of that special too...my nano has been sitting in the ATL post office since monday. They decided to deliver it today. First impressions, for that to be an entry level or basic model jeeeeeeeeeeeez, i am impressed. i ordered 2 stems, the glass one and the basket one. plugged the nano up and went and cooked dinner. tried the glass bowl first, the hit knocked me back, finished that session in one shot. the temp was on about 7.5 ish....dialed it down to 6.5 and used the basket bowl...flavor was very nice...very nice. i like this vape. I have to custom logs from alan actually 3..they are plugged up in different rooms. This vape will be pluggen in on my desk so i can get while studying, gaming and such. impressive vape. gonna have to save up and get a custom one to had to the collection.
mucsusn
60 going on 20
I won't have time for pics for a few days (don't have a day off until 12/19), but just had to give a shout out to Snappo and the folks at Epicvape......Snappo sent them two lovely blanks, one Irridescent Fiddleback Satinwood, and the other Pau Rosa. They are just beautiful, and from the time I made up my mind on the wood, the whole process took less than two weeks to having the beautiful pieces in my hands. Breaking them in now, will post pics very soon!
BT Bean
Bredda Gravalicious
After much thought I had decided not to get a water tool after getting my Nano as it seemed perfectly fine without. But now almost three months later I find my throat and mouth to be a little irritated. My real concern with a water tool is I can see no possible reason I would want to finish a bowl in one or two hits. To me, the ritual is as important (ok, almost as important) as the taste, high, etc. I want to go up and savor my time with the Nano. So having very little experience with any sort of bong, is it possible to sip it somehow? Or alternatively would a J-Hook cool down the vapor significantly? I was looking at the Cane Gun which is about 9 inches, so about 3 inches more glass than a nano stem. Is that enough?
sk8man121
Frozen_Vaporent
Hey guys, I recently broke out my E-Nano after purchasing one of the new (to me) stems w/ built-in glass screen and am running into a ton of trouble. I notice that the screen sits just above the heater, which leaves literally almost no space at all for herbs. The herbs I'm putting in and packing down are combusting with fast draws at heat level 7.
What am I doing wrong, here? Clearly there's got to be a tried-and-true technique that I'm overlooking.
What am I doing wrong, here? Clearly there's got to be a tried-and-true technique that I'm overlooking.
CarolKing
Singer of songs and a vapor connoisseur
Here's a pic I've posted before. My cherry enano and my black leaf j hook from @PlanetVape.
I highly recommend a J hook a nice addition to your vaporizing collection. I use mine with several vaporizers. You just need a GonG. I find more glass that fit the 18mm size verses the 14mm size. It's nice to have both if you can afford it.
@Enchantre let me use her enano with the j hook and I wanted one too. That probably was 2 years ago.
@sk8man121 sounds like your glass built in screen might be faulty. It shouldn't be that close to the heater. Try also turning your heat down a little. I would contact EpicVape if it's a problem. Some there are flaws in glass. Each piece turns out a hair different.
I've had 2 built in glass screens stems and was able to have a session that lasted 10 min or so. I'm glutzy so I broke both. When they fall they break right where the glass screen is.
Edit
Yes it does cool the vapor. You can always try different temps to see if you can find a sweeter spot that doesnt cause you harshness.
I highly recommend a J hook a nice addition to your vaporizing collection. I use mine with several vaporizers. You just need a GonG. I find more glass that fit the 18mm size verses the 14mm size. It's nice to have both if you can afford it.
@Enchantre let me use her enano with the j hook and I wanted one too. That probably was 2 years ago.
@sk8man121 sounds like your glass built in screen might be faulty. It shouldn't be that close to the heater. Try also turning your heat down a little. I would contact EpicVape if it's a problem. Some there are flaws in glass. Each piece turns out a hair different.
I've had 2 built in glass screens stems and was able to have a session that lasted 10 min or so. I'm glutzy so I broke both. When they fall they break right where the glass screen is.
Edit
Yes it does cool the vapor. You can always try different temps to see if you can find a sweeter spot that doesnt cause you harshness.
Last edited:
BT Bean
Bredda Gravalicious
Thanks @CarolKing, I knew you had one. Does it seem to cool the vapor significantly?
@sk8man121- less is more!
@sk8man121- less is more!