Discontinued Zion vaporizer

[TheDudeNextDoor]

Just to pipe in since someone asked specifically, this is the adapter that I got. Works perfectly with the Pinnacle tower. With that said, it does not clear the top of the Zion, but the tower sits perfectly on the 14mm male with about 1/8" of the bottom of the tower wedged perfectly against the vertical edge of the Zion top. Not sure it would work with all WTs. If my wt was even 1mm thicker glass, it would not fit.

 

[Sasquatch_Jr]

Just occurred to me that it's cost effective to buy a D020 which comes with an 18mm-18mm adapter. I bet you could get them to throw in an 18mm-14mm one too either in place of the useless combustion bowl and glass nail or a for a few dollars extra. $22.40 delivered and it comes with a decent piece of glass.

http://www.dhgate.com/store/product/d020-bubbler-hand-blown-glass-vase-perc-water/175832535.html

Won't be around in a couple weeks when it would likely arrive but I may order one later for when I'm back from my business trip.

 

[TheDudeNextDoor]

A little Zion humor for this fine Friday night.

Peruse the site to understand this one. lol. Just ribbing you, @RBT. Put all the pics upside down if that is what you wish, just as long as you keep making these beautiful beasts.

 

[Shit Snacks]

I've been really enjoying my Zion. I must admit I like her running hot. I do like and enjoy the full flavor the first few pulls allow for. Once the internal body starts getting up to temp the non stop clouds start and it's a freaking show. Rinse and repeat as necessary. Or unnecessary but a total blast.

Not too surprising, especially with you coming from the Triangle of Death aye? Glad Zion is holding its own for you, enough to make you not miss TOD (too much)?

But yeah when sessioned, and she gets heat soaked, hitting back to back, hold onto your hats, or rather something sturdy, like a wall, or, you know what just sit down before you hurt yourself when your knees buckle

 

[cybrguy]

Just occurred to me that it's cost effective to buy a D020 which comes with an 18mm-18mm adapter. I bet you could get them to throw in an 18mm-14mm one too either in place of the useless combustion bowl and glass nail or a for a few dollars extra. $22.40 delivered and it comes with a decent piece of glass.

http://www.dhgate.com/store/product/d020-bubbler-hand-blown-glass-vase-perc-water/175832535.html

Won't be around in a couple weeks when it would likely arrive but I may order one later for when I'm back from my business trip.

That calls for a picture...

Or more to the point...

 

[phattpiggie]

Saw this neat little battery tester which comes with the case. Nice and simple.

 

[RastaBuddhaTao]

@TriiKLe and I had a chance to talk shop today and an alliance was born. True American Artisan must-have torch vaporizers! I am putting my order in as soon as @Shit Snacks helps me pick between the Daisy and the Lily... OMG I think VAS has finally struck RBT!

So, if you don't already have one get your VAS on and pick one up (Link Below) GO! No, I mean Right Now!!!!

http://www.triihouse.com/tablet/index.html

 

[Shit Snacks]

@TriiKLe and I had a chance to talk shop today and an alliance was born. True American Artisan must-have torch vaporizers! I am putting my order in as soon as @Shit Snacks helps me pick between the Daisy and the Lily... OMG I think VAS has finally struck RBT!

So, if you don't already have one get your VAS on and pick one up (Link Below) GO! No, I mean Right Now!!!!

http://www.triihouse.com/tablet/index.html

Haha amazing RBT!

Figured you two would really hit it off...

Regarding the choice, I'd say go Daisy for the bigger bowl and wider mouthpiece for smoother and even bigger hits, its a really fun unique vapor experience all on its own, need to stir every hit with these models but the hits can be enormous.

Lilys bowl is more Zion size (flexible on amounts as well) but it is much harsher with the stock stem imo, though you may not have a problem with that, and there are many solutions, including Ed and their own wonderful little GonG, but you haven't even begun water with Zion yet soooo

Yeah also Daisy a bit easier to control carbing and flame position with the extra space, though that will take some practice with either model regardless, I have to take my glasses off for both unless I'm using a bubbler to be able to really see and aim properly. I originally had my friend do the torch for me with his Daisy before I learned, but overall I think it's probably your best bet to begin with, the flagship like Zion

 

[VegNVape]

Ha ha awesome!

Unless you need pocketable portability, I think @Shit Snacks has it right & you should really start off with Daisy.

She's a beautiful piece of extremely functional coffee table/desktop furniture.

Once you've fallen for Daisy maybe you can bring her little sis in on the action at a later date.

I love 'em both in different ways.

Daisy = bong.
Lily = pipe.

IMO.

Triihouse vapes pack one helluva punch and gotta whole lotta soul

Yeah! Get with the 'tane my good fellow!

 

[1_gr8_underdog]

@RastaBuddhaTao I also recommend Daisy.

 

[RastaBuddhaTao]

Thanks guys! I can always count on you for rapid an accurate advice. I ordered the Daisy in Walnut. Ugh, this is what I put you guys through hah? Is it here yet? Damn VAS. I ordered an Ubie too as I have always been intrigued by them. Is it here yet?

BTW I chatted with Ed and he is down with making stems for the Zions... D O P E

Today was a really really good day

 

[IAmKrazy2]

@RastaBuddhaTao I also recommend Daisy.

Thanks guys! I can always count on you for rapid an accurate advice. I ordered the Daisy in Walnut. Ugh, this is what I put you guys through hah? Is it here yet? Damn VAS. I ordered an Ubie too as I have always been intrigued by them. Is it here yet?

BTW I chatted with Ed and he is down with making stems for the Zions... D O P E

Today was a really really good day

I also will recommend Daisy. One of my few current "portables" that can compete with the desktop juggernauts.

 

[TheDudeNextDoor]

 

[RastaBuddhaTao]

Must... Have... A Daisy!..... drool.... VAS. Walnut grain is Killer!
It's pure convection, hand crafted in America by a dude who has killer customer service so you know you will be taken care of. It's only $139 and it comes with the torch... Go by a Triihouse!!! I mean, you can go by a cheap conduction vaporizer with plastic parts in the flow path if ya want because that's all you can get for $139.

 

[virtualpurple]

I am so ready for my device to ship so I can put it through its paces.

 

[ragnorokk]

Must... Have... A Daisy!..... drool.... VAS. Walnut grain is Killer!
It's pure convection, hand crafted in America by a dude who has killer customer service so you know you will be taken care of. It's only $139 and it comes with the torch... Go by a Triihouse!!! I mean, you can go by a cheap conduction vaporizer with plastic parts in the flow path if ya want because that's all you can get for $139.

Actually, I hear there's a rockin new manual dual battery unit on sale for $110 around here somewhere that can be preordered...

 

[HD Springer]

Ok. I finally calmed my Zion down and truly tested the low end flavor side of this chameleon. At roughly 50% power on a 15 second pre heat I got a mouth full of solid flavor hit. No noticeable vapor but unreal flavor. Repeated same preheat and got another wow flavor with a wispy cloud of vapor. Turn up dial 5-10% more about half the pre heat and another great flavor hit with a good amount of vapor. I repeat 2 more times and I'm in a cloud of vapor. The taste is still very good. No burn popcorn flavor. Load after 5-6 hits is starting to turn golden. I stir it and take a HUGE hit. And then get a couple more after. It's amazing this this is even working let alone giving me this kind of results.

 

[RastaBuddhaTao]

Actually, I hear there's a rockin new manual dual battery unit on sale for $110 around here somewhere that can be preordered...

Well Yeh ya have to buy all three RBT vaporizers too! Good to hear you got the Triangle monkey off your back enough to settle into some low temp sessions on the Zion HD.

 

[thekarmawhore]

I can't help but compare vaporizer performance to automobile performance when I think about such things.


Most vaporizers remind me of automobiles with 'governor' controls such as u-haul vans and DOT certified mopeds. They are great in that they deliver an anticipated performance and don't allow accidental or unauthorized over-performance in any given situation. You can't get yourself into any trouble with them and that's awesome.

The Zion Family of devices remind me of high performance automobiles without any 'governor' controls and are great in that they allow you to 'drive' however you feel like driving.

Want to putter around town on grocery missions? Can do.
Want to peg it on the straightaways and drift every curve? No prob.
And everything in between.

No governors, no limiters, no speed limit.

Just you and your free will enjoying each moment as you see fit.

As it should be

 

[VegNVape]

Yes Karma, yes!!!

Zion totally gives me that open road kinda feeling . . . . . time to open it up!

 

[cybrguy]

I find when after flavor I work between 25% and 50% and need no preheat.

 

[Ed's TnT]

BTW I chatted with Ed and he is down with making stems for the Zions... D O P E

Today was a really really good day

Yeah, I gotta admit yesterday was a good day as Ice Cube would say!

I really had a good day in my life yesterday, dont need to get into it here but damn what a day, not just a good day but damn damn a great day!

Now to the matter above, you bet I am down bro, I am up for anything and you can rest assured I will do what I can and will give it my best and only offer the finest of my work! Neat thing about my work is that its always changing, new ideas, new flavors with new details, my work is a progression that continues to surpass my imagination! I so dig doing new things and branching out and I have you my man and all the many many fine members here at FC who have pushed my skill level and talent to reach new heights! I appreciate you reaching out to me and look forward to working with you on your venture and watching it grow as I have with many others.

I am truly blessed yall, I thank everyone for your continued support and enthusiasm for what I love to do!

 

[TheDudeNextDoor]

Oh man, an Ed's stem on a Zion.

I am so happy right now...

 

[cybrguy]

I haven't tried any of Ed's stems. Will a wood stem absorb heat like glass? What is cleaning them like? Can you use ISO?

 

[TheDudeNextDoor]

I haven't tried any of Ed's stems. Will a wood stem absorb heat like glass? What is cleaning them like? Can you use ISO?

I'm not sure what Ed might whip up, but I believe his stems are typically bored with a stainless steel tube. Although with a GonG end, he might go glass? That would be sweet.