I could watch that video all day
Discontinued Versa Infinity - The Glass Vaporizer
- Thread starter Leiana
- Start date
I could watch that video all day
SD_haze
Well-Known Member
whoops! thought i might have missed it.
GSH
On a Möbius plane
Last edited:
Reflections
Well-Known Member
Thanks for the vids leiana...dreams of the G1 
For those of you who care to know why the Infinity & G1 do such efficient high vapor output, here is why.
The Venturi Effect
Our venturi effect is performed by the heating element itself. The airpath is restricted to only flow through the heating element before exiting the 18mm joint.
This effect is normally done in other ways but Versa chose the compression to happen in a heated chamber rather than before it or after it.
Quick video review of the performance: Click around if you want.
In our first video, we applied the venturi effect at what we call our maximum cloud voltage.
Please take a look. No prime instant vapor is proof of application.
However if that video makes you wonder, the effect is deepened by using the vaporizer on a constant contact surface like a hookah.
Here is a link to that just in case you hadnt seen the clouds the hookah produces. It really inspires me to use the hookah in new ways.
The amount of vapor production on the hookah is shocking, without browning
The Venturi Effect
Our venturi effect is performed by the heating element itself. The airpath is restricted to only flow through the heating element before exiting the 18mm joint.
This effect is normally done in other ways but Versa chose the compression to happen in a heated chamber rather than before it or after it.
Quick video review of the performance: Click around if you want.
In our first video, we applied the venturi effect at what we call our maximum cloud voltage.
Please take a look. No prime instant vapor is proof of application.
However if that video makes you wonder, the effect is deepened by using the vaporizer on a constant contact surface like a hookah.
Here is a link to that just in case you hadnt seen the clouds the hookah produces. It really inspires me to use the hookah in new ways.
The amount of vapor production on the hookah is shocking, without browning
Last edited:
stickstones
Vapor concierge
i didn't realize you had that going on in the ceramic element. i thought we were heating up via the outside of the element. This difference will separate you from the 7th floor products...me likey!
NinjaMindTriks
Ninja Vapor Enthusiast
This looks like the clouds I can pull with the Sublimator, only without the burning risks and a lot easier to use. I also like that users can replace and upgrade themselves easily without having to send the whole unit back. Not to mention it's much more economical. Keep up the good work and videos.
I just have to step in here. I have two designs within arm's reach that have been completely and easily user-repairable for a year or more: the FlashVAPE and the Volta. So anything but "FINALLY".
darkrom
Great Scott!
Good call. Both are portables, and I'm not familiar with either. Is it fair to say "finally" with a home vape at least? Maybe da buddha could be repaired but I'm not sure.
Not to refute your statement or anything but, we are attempting to make the first plug-in vape to take user modification this far. Heaters, control units, glass bodies, ect all can be changed by the user and upgraded. Post me a link to a vape thats trying that other than infinity and I will give them a phone call and become best friends!
Why we like positive feedback
I know many people dont enjoy for users to get too excited about new products pre-launch but this is just what happens as a natural result of the love we are putting into the product and the community.
Responsive manufacturers need human excitement like fuel in a car. We are motivated by our customers, we love them and value their input beyond our own. People will have their vapes soon enough and I am looking forward to the most brutal and honest reviews this forum has ever seen. Once we get our beta units brutally battle tested, we will modify anything and everything that we can improve on immediately that can still fit within our pricing margin.
The Infinity will forever be known as the vape FC shaped to perfection. So far so good.
Stop eating and sleeping and pooping Versa people!! Back to work
We do have pretty good lunches.... speaking of work, we will be hiring soon. Some jobs will be work from home opportunities. On my way to the glass manufacturer. See you later.
Last edited:
darkrom
Great Scott!
If I could quit my job and get away from a desk setting my back would be THRILLED. I'm too broke as it is to take a reduction in pay, but I'd quit my IT job in a second to work for a vape company. Someone is going to be very happy when they land that job!
Know what I got last time I was looking for WFH jobs when my health issues started? Depressed lol.
I found 90% scams, 5% stuff that seemed like illegal shady stuff, and 5% slave labor rates. Its really a bummer that in this day and age more jobs aren't able to be done from home. Desk job might not be the cause of my constant pain (or it could) but it certainly isn't doing me any favors. You'd think with more technology, more employers would offer this.
Good on you guys for doing so when possible! Then again a vaporizer company isn't usually the type who makes strict rules just "because its the norm."
Know what I got last time I was looking for WFH jobs when my health issues started? Depressed lol.
I found 90% scams, 5% stuff that seemed like illegal shady stuff, and 5% slave labor rates. Its really a bummer that in this day and age more jobs aren't able to be done from home. Desk job might not be the cause of my constant pain (or it could) but it certainly isn't doing me any favors. You'd think with more technology, more employers would offer this.
Good on you guys for doing so when possible! Then again a vaporizer company isn't usually the type who makes strict rules just "because its the norm."
Last edited:
Reflections
Well-Known Member
hmm wonder what type jobs...
darkrom
Great Scott!
Work from home...That is a dream. I know a few people who work from home...they never get out of their pajamas.
I know you are joking, but do you realize how much better loose fitting PJ's are on my back than office pants with a belt? Surprisingly a LOT. They don't even know what I have anymore, just that its chronic and 3+ years and getting worse. Survey says fibromayalgia for now.
I dream of a day when all employees can wear comfy clothes rather than impractical "office attire" and can medicate at work without threat of being fired!
No jokes at all...I would love to work from home. I've had to commute up to 4 hours a day, not including time on the road for other aspects of past jobs...I don't think my blood pressure will ever be the same.
next level
Well-Known Member
Yeah its nice to work from home. But I always get out of my pajamas. More productive...
Not to refute your statement or anything but, we are attempting to make the first plug-in vape to take user modification this far. Heaters, control units, glass bodies, ect all can be changed by the user and upgraded. Post me a link to a vape thats trying that other than infinity and I will give them a phone call and become best friends!
I guess me and you should become good friends then.
:-) as for the above statement.
Hercules with the Core does all that.
But this thread is about your device and I'm really happy to see one in action. I can't wait to try it out.
I'll be waiting for your phone call.
:-)
Quick question when does it go on sale? I have a vriptech and like to replace it.
!
I wish more manufacturers collaborated in this space. We could likely make much better products as a team.
To answer this question
PM me and uh.... we might be able to figure out a time when you can pick one up. Are you in LA? The CEO will be there soon and you might wanna take it for a test ride on one of the beta units. I know we will be accepting a second wave of orders once the current beta team gets their units. Those secondary orders will be shipped by the end of FEB. We will also have a campaign that will drive pre-sales but we wont wait until its over to start delivering units. I suppose this isnt really pre-ordering more than on demand production. We wont have large stock produced until spring.
The new reality of the desktop vaporizer
Until now heating elements were built into a design rather than being easily changeable by a customer without special tools. The new Sublimator now incorporates this model with the XLR 2.0 which is amazing to see. I dont doubt this will become a new alternative standard in high-end home vapes.
With our current electronic infrastructure we could produce an e-nail for our accessory arsenal and everyone with a MKII or G1 could power it from their control unit in seconds. Then they would have 2 vapes in one.
Once people get a taste of an expandable high performance vaporizer, their prospective will be changed forever! I am really happy with the Versa and Sublimator teams! SO many good vibes!##!@$@!
F&#&!#$!$!##(%@#)@#%(#$)!*@$)@$ Weekends!
I am beginning to truly dislike the weekends. Incomplete units everywhere. People snoozing. Mail carriers frozen. Lights off.
Does anyone knows another glass manufacturer in the USA? The glass manufacturer having too many large client accounts is what slows us down. We need another good reliable high quality blower. We can supply the glass.
Accessories
OMG..... I wish I could just vomit
all of our productions all over this thread. Even for us that wouldnt be smart, HOWEVER I can tell you, your Infinity MKII's and G1s are going to have some very nice friends to play with ..... muahahahahahahahahahahahahaHappy dance
