Discontinued ThermoVape
- Thread starter VaporBoxed
- Start date
OF
Well-Known Member
AFAIK there is none. I've reported on their counterfeit Revolution, but have never seen anything about DART. Do you have a link, please?
OF
OF
Well-Known Member
http://fuckcombustion.com/threads/thermovape.4770/page-226#post-402669
will get you started, searching "Zoly" will get you more if you care to.
Are you sure you can get this even? I got it at a LHS that no longer has any (no doubt a customer or two let them know how well they really work...).
OF
chronickiller7
Well-Known Member
So is thermovape gone?
unfortunately, yes.
hoptimum
Well-Known Member
unfortunately, yes.
Lacking customer support, their extinction seems inevitable.
chronickiller7
Well-Known Member
Damn. I just saw that tech interview on YouTube, and they seemed like a great company with solid products. Guess I'll stick to my persei.
jpdnkstr
Well-Known Member
They were.......
..... thats what we have to work with now![:\](/i/s/hmm.gif "Hmm :\")
. I'm sure we'll get by!
incandenza
Well-Known Member
Just a word of caution regarding new LiFePO4 batteries from Tenergy -- the negative side is now slightly raised which makes the batteries longer by a few millimeters. So, if you put these new bats in your T1 and fully screw together the battery compartment, the switch will be on without you actuating it! You have to leave the battery compartment unscrewed a little bit in order to use the switch with these new Tenergy LiFePO4 batteries. Be careful because you can easily burn out your core if you leave it on constantly. I lost at least one core this way by accident.
After 4-5 years with the T1, 3 out of my original 6 batteries that came with the unit has finally died
. Since 1 set wasn't enough power for me to fully medicate I decided to get new LiFePO4 batteries from Tenergy. After some research I've notice they're two versions, one being 450mAh and the other being 750mAh. I went for the 750mAh and like incandenza said, "the negative side is now slightly raised which makes the batteries longer by a few millimeters". After some use and having the new batteries bang together in the original battery traveling tube, I've notice a slight inwards dent on the negative side of the battery caused by the positive side of another battery, that slight dent made it fit perfectly, now I can fully screw it down without having it worry that the coil might go off. 
As for the new 750mAh batteries. They're AWESOME!!! I get around 3-4 bowls with 8-11 long rips of each bowl (with water attachment). Nice thick dense hits and heat up time is like 3 seconds max. Anything longer than that then you'll notice charring. I love my T1 this thing is practically bullet proof. Everything is still original from when I first got it back in 2011-2012
. Since 1 set wasn't enough power for me to fully medicate I decided to get new LiFePO4 batteries from Tenergy. After some research I've notice they're two versions, one being 450mAh and the other being 750mAh. I went for the 750mAh and like incandenza said, "the negative side is now slightly raised which makes the batteries longer by a few millimeters". After some use and having the new batteries bang together in the original battery traveling tube, I've notice a slight inwards dent on the negative side of the battery caused by the positive side of another battery, that slight dent made it fit perfectly, now I can fully screw it down without having it worry that the coil might go off. As for the new 750mAh batteries. They're AWESOME!!! I get around 3-4 bowls with 8-11 long rips of each bowl (with water attachment). Nice thick dense hits and heat up time is like 3 seconds max. Anything longer than that then you'll notice charring. I love my T1 this thing is practically bullet proof. Everything is still original from when I first got it back in 2011-2012
Last edited:
PPN
Volute of Vapor
Could you provide a link for the new 750mah tenergy's, please?After 4-5 years with the T1, 3 out of my original 6 batteries that came with the unit has finally died
As for the new 750mAh batteries. They're AWESOME!!! I get around 3-4 bowls with 8-11 long rips (with a water attachment) Nice thick dense hits and heat up time is like 3 seconds max. Anything longer than that then you'll notice charring. I love my T1 this thing is practically bullet proof. Everything is still original from when I first got it back in 2011-2012
aKa
Well-Known Member
Does anyone know if Vapor Envy is still an active shop ? They seem to have a few Thermovape items that can not be found anywhere else, but I cannot get an order through (I get an error message when checking out).
I sent them several emails without getting any answer, and their phone number seems inactive, but I'm calling from France so I may be doing something wrong.
If they're still doing business, could someone help get in touch with them ?
I sent them several emails without getting any answer, and their phone number seems inactive, but I'm calling from France so I may be doing something wrong.
If they're still doing business, could someone help get in touch with them ?
aKa
Well-Known Member
I've been worrying about that. I always regreted not buying the power supply kit and the glass mouthpiece when they were available, as I've had nothing but frustrating experiences with the batteries of the T1. And now on top of that those batteries are getting harder to find. It's a shame a finely crafted device like the T1 is just gathering dust in one of my drawers.
I know it's not the place to do trades, but I'd love to get my hands on the official PA made by the Thermovape guys ...
Oh well ...
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Post a wanted ad in the classifieds, you never know, I actually got my PA bc someone was selling one there a long while ago. Even though I hardly ever use my T1 anymore, the PA (along with a wpa, mine is 14-18mm delrin from that same member) really does breathe new life into what was a fantastic on demand convection vape ahead of its time, glad it was my first.
OF
Well-Known Member
I can help out with the PA but not the WPA. Not the official unit but a well functional device. Actually, I had it available before TV had one out.
Just shoot me a PM if interested.
Bravo Pipes!!!
OF
AVENTUS
Well-Known Member
I remember the thermovape Cera was the first portable vaporizer I seriously considered. But I told myself I'd wait for the day an adjustable temperature / low temperature vaporizer came out, that rivaled the digital volcano.
Fast forward today when live resin is fairly common, and these tiny low temp stainless/ceramic pens like the Linx Hypnos zero, really do the trick so well, and taste just as good as low temp on a volcano!
Glad thermovape cera set the bar high with materials and construction.
Fast forward today when live resin is fairly common, and these tiny low temp stainless/ceramic pens like the Linx Hypnos zero, really do the trick so well, and taste just as good as low temp on a volcano!
Glad thermovape cera set the bar high with materials and construction.
Love it so much I have 3 and a brand new eo core. The other 2 eo cores and ll core still pump. Im gonna try a newer battery and watch the magic all over again. Flavor is always top shelf with the cera.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
For me the portable on demand convection promises of Thermovape fortunately live on in the Grasshopper (temp control power pen) and Milaana (analog style flavor beast) even more effectively though I do wish TV kept on going
I agree. And though it takes a bit longer to get to vape temp the ceras flavor profile beats both just my opinion. But then again the gh and mi are there too. Time for some head to head comparison
Edit: who knows what batts are kick ass these days that would rock the cera. I have a set of efast 18650's from my apollo. They have the buttontop. Thanks for any input.
VAPEHUNTER
Well-Known Member
Vapor envy still lives on but only on e-bay.
http://m.ebay.com/sch/i.html?sid=vaporenvy&_pgn=1&isRefine=true
He still has the glass mouthpiece too.
