Discontinued The Splinter by RBT

[vapviking]

Switched my Splinter V2 from Reuleaux dna250 to this new Sinuous P80 and loving it so far. Temp control is cool, but I don't know wattage just might feel better, a more effective way to get that RBT signature full bodied vapor experience!

Its so portable, ergonomic, and sleek now, a perfect fit. I might like it even better than my Z on the RXG3D... Really great value here, especially from vgoodiez of course! Need to spend more time with it, though I also have a new Milaana2... That's a bacote Ed's stem and standard Jr cooler there as well btw

I'm so glad to hear this from someone I believe is at the upper end of the knowledge field with these things.
Since gettiing my first RBT product a few months ago, a Splinter V1 from the pre-order, my only-ever mod has been a Sinuous P80 (blue!) and I only use it in Watt (power) mode, generally 37 to 40 watts, and it becomes a bit of a hybrid between a regulated/unregulated vape. Usually preheat for several seconds before each of the first couple of draws, then I simply release to fire button as soon as I feel some vapor happening (if not earlier!) and continue to draw some more. My habit is to rotate the stem about a third of a turn after each draw, without stopping to look or stir, and this seems to even out the look of the spent material.

Recently the Splinter came apart, the Heater assembly became dislodged from the wooden body. I don't know why this happened, but I suspect a minor fall and possibly (?) over-tightening onto the mod. It looked like maybe they could have used a little more adhesive during assembly. At any rate, Scott at Vgoodiez has handled my dilemma and is sending me a new Splinter V1+, same Bubinga body as V1, but now the elimination of the mica, like the V2.

A big thanks to Scott for helping me out. In a couple of days I'll be able to try the xl8r set I picked up while waiting.

 

[Consolidated 1]

A correction . My Splinter Is V1+ also...

 

[jarr92]

Anyone use both the xl8r nav and xl8r nav jr from vgoodiez to compare the two? Definitely seems like a good investment for the v2 once I have it up and running.

 

[MasterChief]

Anyone use both the xl8r nav and xl8r nav jr from vgoodiez to compare the two? Definitely seems like a good investment for the v2 once I have it up and running.

I have both. I mostly use the short one, but the long one cools better if you like longer draws.

 

[Megaton]

So, even drawing so slowly as to almost not be inhaling at all, I barely managed to get my herb to look slightly browned at 35w, so there must be something amiss.

I emailed ryan@rastabuddhatao.com last week but, perhaps unsurprisingly, I have not yet had a response. Is this the right address to email, or is there another that people actually get responses from?

It's a real shame, so many people love their splinters and have had good customer service but I have had a really unfortunate experience myself of RBT and this product since the first splinter wait list was opened over a year ago.

 

[paehtod]

Hi @Megaton , I think you may try to test if your splinter are working or not? If I hold the fire button for 10 seconds x 3 times continually on 60W power mode, i can see the heater glowing red hot under the screen, can you try that? if your heater can get hot enough, then i think it may related to the preheat time and inhale technique. If your splinter don't get hot at all, then it may be a defect one. just my , really wish everyone can enjoy the splinter, its really ass kicking good

 

[Summer]

^ That was simple, sage advice, @paehtod.

 

[Megaton]

Hi @Megaton , I think you may try to test if your splinter are working or not? If I hold the fire button for 10 seconds x 3 times continually on 60W power mode, i can see the heater glowing red hot under the screen, can you try that? if your heater can get hot enough, then i think it may related to the preheat time and inhale technique. If your splinter don't get hot at all, then it may be a defect one. just my , really wish everyone can enjoy the splinter, its really ass kicking good

Yep, it def glows, even at at 50w. Thing is it barely even changes the colour of my bud at the power most other people are suggesting (I.e anything lower than 40w)

Perhaps it is all working as expected, not every vape is suited for everyone. It's just not the vape for me.

 

[Summer]

What vape are you using @Megaton? And what other vapes do you have?

 

[Megaton]

What vape are you using @Megaton? And what other vapes do you have?

We are talking about a USA splinter on either DNA mods or a wismec r200s. think my other vapes should be in my signature? But I own a few, mostly lots of logs, but a few other portables too (arizer, vapcaps, sticky brick etc).

 

[paehtod]

I uploaded a video to show how my standard usage of the splinter on the Wismec RG3D,

initial resistance is 0.23 ohm, 36 watt, I would say it is similar to use 1cm small flame with the Sticky brick Jr., fill the chamber and slightly tamp the material surface, press the fire button, the resistance then will raise to 0.31x ohm, i will pulse the fire button and start inhale slowly and steady, the inhale speed is like normal breath, when you feel the inhale air getting warm, you may inhale little faster, each draw i will count to 8-10 in my brain then exhale, the first hit usually light, 2nd and 3rd hits are cloudy and potent, 4-5 hit are taste roasted. wish it could help. if your heater will hot then no problem you finally will get there~

 

[Megaton]

Thank you @paehtod , much appreciated.

 

[flammy]

Switched my Splinter V2 from Reuleaux dna250 to this new Sinuous P80 and loving it so far. Temp control is cool, but I don't know wattage just might feel better, a more effective way to get that RBT signature full bodied vapor experience!

Its so portable, ergonomic, and sleek now, a perfect fit. I might like it even better than my Z on the RXG3D... Really great value here, especially from vgoodiez of course! Need to spend more time with it, though I also have a new Milaana2... That's a bacote Ed's stem and standard Jr cooler there as well btw

Interestingly enough, I just had to show a buddy how to work the splinter and I was running through the different options. Tried wattage mode again and I agree, the splinter just seems to work well with wattage. I am using much lower wattage than what others here have reported though. I haven't needed to cross 30 watts...usually around 26-28. First hit is tasty and whispy. All subsequent hits are nice and full.

 

[vapviking]

Interestingly enough, I just had to show a buddy how to work the splinter and I was running through the different options. Tried wattage mode again and I agree, the splinter just seems to work well with wattage. I am using much lower wattage than what others here have reported though. I haven't needed to cross 30 watts...usually around 26-28. First hit is tasty and whispy. All subsequent hits are nice and full.

I have been setting watts to 40, but I believe that is a factor of may patience level (low!). Higher power produces quicker (more dramatic?) vape. More like an unregulated experience (in my imagination, 'cause I've not really used any fully unregulated vape) and you have to be more careful not to over-cook. I do agree that numbers in high 20's on up the scale work just fine.

 

[Kaptan]

Switched my Splinter V2 from Reuleaux dna250 to this new Sinuous P80 and loving it so far. Temp control is cool, but I don't know wattage just might feel better, a more effective way to get that RBT signature full bodied vapor experience!

Its so portable, ergonomic, and sleek now, a perfect fit. I might like it even better than my Z on the RXG3D... Really great value here, especially from vgoodiez of course! Need to spend more time with it, though I also have a new Milaana2... That's a bacote Ed's stem and standard Jr cooler there as well btw

I’m considering the P80 as well and I’m curious, did you get it with the stock software or Myserevic?

 

[VapeKnight]

I couldn’t help myself and ordered a V2 with the Xl8r and a wismec reuleaux gen 3. The only problem is I’ve never used a mod box before. Besides setting the wattage I want to use do I need to change any other settings from the defaults when I start using it. I don’t take delivery until next week but I’d like to be ready.
Thx

 

[Summer]

We are talking about a USA splinter on either DNA mods or a wismec r200s.

Sorry, I meant mods, but you answered my question anyway. Are you having difficulty with the Splinter with both mods? I assume the dna mod is you primary usage one? If so, please repeat what dna file & values you have it
programmed with.

Do you get vapor if you use both mods in wattage mode?

For the record, on my @android, no signatures appear. Not even post #s to link to.

I’m considering the P80 as well and I’m curious, did you get it with the stock software or Myserevic?

We got them with stock software. You have to install myevic yourself. Only if you order from Vgoodiez will the mod be updated. You'll just pay more for the mod with this option.

Wrong thread, please delete.

After you note the post for deletion, click on the Report button in the lower right to notify the mods to delete. Makes it easier for them when you bring it to their attention.

I couldn’t help myself and ordered a V2 with the Xl8r and a wismec reuleaux gen 3. The only problem is I’ve never used a mod box before. Besides setting the wattage I want to use do I need to change any other settings from the defaults when I start using it. I don’t take delivery until next week but I’d like to be ready.
Thx

No. While your waiting for delivery, start reading this & the mod firmware thread.

http://fuckcombustion.com/threads/t...ns-and-customizing.23742/page-13#post-1374635

 

[vapviking]

I couldn’t help myself and ordered a V2 with the Xl8r and a wismec reuleaux gen 3. The only problem is I’ve never used a mod box before. Besides setting the wattage I want to use do I need to change any other settings from the defaults when I start using it. I don’t take delivery until next week but I’d like to be ready.
Thx

You got some batteries coming, too?

 

[Shit Snacks]

I’m considering the P80 as well and I’m curious, did you get it with the stock software or Myserevic?

Yeah I got mine from China like Summer super cheap, so comes with stock, vgoodiez can load up whatever when you buy it from him though. I did load mysurevic on my G3D, but I liked using stock there so that's what I'm sticking to here for now... I just raised the fire shut off to 15sec, set to VW mode, and I also set battery meter to percentage was all.

 

[Megaton]

Sorry, I meant mods, but you answered my question anyway. Are you having difficulty with the Splinter with both mods? I assume the dna mod is you primary usage one? If so, please repeat what dna file & values you have it
programmed with.

Do you get vapor if you use both mods in wattage mode?

Aye I figured that was what you meant, no worries!

I have tried several versions of Herbies files from fcshare on the DNA, as well as manually entering the details on my tubo flashed r200s, and not managed to even get vapor at all on either of them, so I stick to just wattage now.

 

[VapeKnight]

You got some batteries coming, too?

yes. I have a few extra 1860's since I have several flashlights that use them, but I ordered some Vapcells from the 18650batterystore.com. great prices
https://www.18650batterystore.com/18650-p/vapcell-18650-battery-3000mah.htm

Please forgive my ignorance. I just read 8 of 13 pages of the box mod firmware thread and didn't understand most of it... What are the benefits of doing many of these updates ? How does changing many of the box mod functions affect the performance ? I assume that simply changing the wattage will change the heating temperature and the user can hold down the power button to regulate its power, similar to something like a firefly or magic flight. will I need to adjust the settings for coil, power etc or is this just tinkering

 

[Shit Snacks]

Please forgive my ignorance. I just read 8 of 13 pages of the box mod firmware thread and didn't understand most of it... What are the benefits of doing many of these updates ? How does changing many of the box mod functions affect the performance ? I assume that simply changing the wattage will change the heating temperature and the user can hold down the power button to regulate its power, similar to something like a firefly or magic flight. will I need to adjust the settings for coil, power etc or is this just tinkering

You are correct all you need is wattage for power, no need to bother with any of the fancy firmware, pick a mod you like

 

[flammy]

Please forgive my ignorance. I just read 8 of 13 pages of the box mod firmware thread and didn't understand most of it... What are the benefits of doing many of these updates ? How does changing many of the box mod functions affect the performance ? I assume that simply changing the wattage will change the heating temperature and the user can hold down the power button to regulate its power, similar to something like a firefly or magic flight. will I need to adjust the settings for coil, power etc or is this just tinkering

You are correct all you need is wattage for power, no need to bother with any of the fancy firmware, pick a mod you like

I was in your spot not too long ago. I ended up getting a DNA mod and didn't worry about firmware. That said, I ended up running wattage mode exclusively and its worked out great.

I agree with @Shit Snacks. Don't worry about the firmware and get a mod that suits your need from an aesthetic and power capacity standpoint.

 

[Megaton]

So I have had a quick little chat with Ryan about the issues I have been having regarding the power I have to put through my splinter and he has confirmed that there is an amount of variance in how some of the American units heat, and so not to be worried about how mine is performing (i.e needing roughly 10w more than most other people seem to need).

Thanks to Ryan and everyone here for your help, advice and patience!

 

[Consolidated 1]

I uploaded a video to show how my standard usage of the splinter on the

initial resistance is 0.23 ohm, 36 watt, I would say it is similar to use 1cm small flame with the Sticky brick Jr., fill the chamber and slightly tamp the material surface, press the fire button, the resistance then will raise to 0.31x ohm, i will pulse the fire button and start inhale slowly and steady, the inhale speed is like normal breath, when you feel the inhale air getting warm, you may inhale little faster, each draw i will count to 8-10 in my brain then exhale, the first hit usually light, 2nd and 3rd hits are cloudy and potent, 4-5 hit are taste roasted. wish it could help. if your heater will hot then no problem you finally will get there~

Generally i couldn't agree more ...
The initial resistance of my Eleaf 100w mod is 0.25 ohm at 38w and then rises to 0.28 ohm.
From 0.23ohm to 0.31ohm and from 0.25ohm to 0.28ohm. Are just the differences between those mods or i miss something?