Mrbrown81k
Well-Known Member
Thinking of ordering one of these, does he ship to Canada? Am I better off waiting for the bigger Zion? Portability isn't important to me.
Discontinued The RBT Milaana (unregulated single 18650)
- Thread starter RastaBuddhaTao
- Start date
- Status
GTAVaper
Well-Known Member
RBT is only shipping the Milaana to Canada if you order before the end of the month.
After that all sales would proceed through his retail partners......of which I think might include Planet Vape......but I would be guessing at a retail mark up. However if you want the Zion......waiting for retail sales is now the only option.
If you want a Milaana soonest possibility then ordering from RBT's store before April is the way to go
little maggie
Well-Known Member
I just looked at RBT's site. It says all Milaana's will be shipped in March. Does anyone know if this is accurate or if the page just hasn't been updated in a while?
AJS
Calm Consistency
80% accuracy.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Definitely two stems in final kit, probably one short one long, definitely one battery and a case, maybe two batts, and maybe an i2 charger too. All still unknowns at this point
AJS
Calm Consistency
Interesting about the charger, as I figured because the Zion didn't this didn't. I shouldn't compare the two beasts, rbt works in mysterious ways.
Two stems and 2 batts would make me very happy.
Pretty sure batteries are the #1 most favorite added accessory for most people in portable vapes. Stems #2? I like batts
Zangano Cruel
IG zan.cru (code) zancru (5% NV checkout discount)
Hola FC:Interesting about the charger, as I figured because the Zion didn't this didn't. I shouldn't compare the two beasts, rbt works in mysterious ways.
Two stems and 2 batts would make me very happy.
Pretty sure batteries are the #1 most favorite added accessory for most people in portable vapes. Stems #2? I like batts
Agreed with above. Plenty of screens is a plus too. Trading one stem for an 18/14 male stem OK plus to me. Basket system for on the go cool.
I already got the IGG Dynastasher-Er to share herb and oils with my Milaana. Soon to be nicknamed too. Really happy to support both guys. Keep upgrading.
Stay vaped my friends...
Andreaerdna
If God is the answer, then the question is wrong
Copacetic
Somewhere North of The Wall
Wow, at the price point the Milaana commands I figured that accessories would be pretty minimal.
I assumed one battery, one stem and some bubble wrap!
If it comes with all the above AND a charger I'll be over the moon
The battery case is a good idea.
I have a 18mm male to male DHGate adapter that I now doubt will fit in the Milaana (joint measures 24mm long, annoyingly between U.S. and I.S.O.), what's the cheapest U.S. M-M that folks have found so far?
(I've just contacted Oregon Glass Blower to ask re' US/ISO and will report back)
Copacetic
Somewhere North of The Wall
Sorry about b to b posts, just missed the edit window 
But:
Oregon glass blower replied to my query real fast.
$16 for a US male to male, pretty damn affordable.
Sadly shipping to my location is $22, so $38 all together.
I'll ask if he can offer a cheaper, slower shipping method.
I'm hoping to get Ed's TnT to make me an adapter anyway, I should save for that, but I like glass too!
But:
Oregon glass blower replied to my query real fast.
$16 for a US male to male, pretty damn affordable.
Sadly shipping to my location is $22, so $38 all together.
I'll ask if he can offer a cheaper, slower shipping method.
I'm hoping to get Ed's TnT to make me an adapter anyway, I should save for that, but I like glass too!
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Mine were expensive, and only cut iso, OGB didn't have any us when I had asked unfortunately... That is a good price for a perfect adapter.
And yeah we'll see what Milaana comes with soon enough, and remember the retail price will be a bit higher too.
@Andreaerdna glue holds the female joint to the wood, this has been discussed here previously, it is not by the heater, it is medical grade heat safe, and the trigger is away from the airpath completely btw
And yeah we'll see what Milaana comes with soon enough, and remember the retail price will be a bit higher too.
@Andreaerdna glue holds the female joint to the wood, this has been discussed here previously, it is not by the heater, it is medical grade heat safe, and the trigger is away from the airpath completely btw
fluffhead
Recovering Idealist
@PlanetVape has us male to male adapters for $20can. Green Buddha shop has adapters for cheap but I don't know if they are us or iso.
AJS
Calm Consistency
Damn expensive!Sorry about b to b posts, just missed the edit window
But:
Oregon glass blower replied to my query real fast.
$16 for a US male to male, pretty damn affordable.
Sadly shipping to my location is $22, so $38 all together.
I'll ask if he can offer a cheaper, slower shipping method.
I'm hoping to get Ed's TnT to make me an adapter anyway, I should save for that, but I like glass too!
If I throw on a m2m, and that m2m proves to be ISO, will it damage the heater, or just not sink completely into the slot.
I just don't wanna attempt something that may hurt my unit, because I have 3 m2m lying around and would wanna trial and error those beasts til I find one that works ... Yaknow?
What happens when an ISO male slides into a USA female. It'll slide in but not seal base to base?
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Damn expensive!
If I throw on a m2m, and that m2m proves to be ISO, will it damage the heater, or just not sink completely into the slot.
I just don't wanna attempt something that may hurt my unit, because I have 3 m2m lying around and would wanna trial and error those beasts til I find one that works ... Yaknow?
What happens when an ISO male slides into a USA female. It'll slide in but not seal base to base?
There is risk of damage, hence could void warranty, reality it likely won't seal airtight in the GonG connection and will perform inconsistently
cybrguy
Putin is a War Criminal
US good, ISO bad... 
No, really, you have to use US joints. An ISO male may damage the heater screen and may invalidate your warranty. It might be possible to use, but won't work as well as it should and is highly disrecommended for its potential for damage.
Yeah, like he said up there.
I've had good luck with OGB, and he knows whats needed.
No, really, you have to use US joints. An ISO male may damage the heater screen and may invalidate your warranty. It might be possible to use, but won't work as well as it should and is highly disrecommended for its potential for damage.Yeah, like he said up there.
I've had good luck with OGB, and he knows whats needed.
Andreaerdna
If God is the answer, then the question is wrong
Thank you for the answer. I know glue is not in air/vapor path, I am not bothered by air/vapor path pollution. I am concerned with durability / components getting unglued overtime.
Wood/glass/plastic/metal they all have differents expansion rates when heated, so I am not very attracted by a device that use this simple yet not very durable assembly solution.
I'll stay on the fence a little more hopeing Ed can help RBT to find new assembly solutions that not involve glue anywhere (as in mflb for example, or venus Apollo), I know it is possible.
AJS
Calm Consistency
My issue is ... I don't know if they're ISO or US, so I'm afraid to even try once it arrives.
flotntoke
thoroughly vaped
I believe the measurements here are correct (US 22mm & ISO 26mm). All you have to do is measure the length of the GonG to tell which you have. Or, if you have different sizes, the short ones are US & long ones ISO.
AJS
Calm Consistency
Thank you SO much. I thought it was thickness, not length. Completely understand now.
You really eased my worried.
My DDaves seems smaller than one of the m2m from dhgate, so maybe that one is US. Hopefully. Thanks again, truly.
cybrguy
Putin is a War Criminal
ISO are 26mm by 19mm (18.8 to be precise), and US are 22mm by 19mm. Here is a pic with US (bottom) and ISO joints. Notice that the US joint almost looks square, as the length is only about 3 mm longer than its width.
Added: These both look like US joints to me...
http://www.ebay.com/itm/18mm-Male-t...179714?hash=item1c62883c02:g:fXMAAOSwA4dWFrUa
http://www.ebay.com/itm/18mm-Male-t...606910?hash=item3d139610fe:g:Wt4AAOSwr7ZW22Nw
Added: These both look like US joints to me...
http://www.ebay.com/itm/18mm-Male-t...179714?hash=item1c62883c02:g:fXMAAOSwA4dWFrUa
http://www.ebay.com/itm/18mm-Male-t...606910?hash=item3d139610fe:g:Wt4AAOSwr7ZW22Nw
Last edited:
DocGonzo
Well-Known Member
I don't have my Zion yet, but I bought a m2m GonG from ThickAssGlass.com and it seems to be US by all measurements. It has a shorter taper and comes in right at 22mm, but I won't know for sure it fits until I can test it, I guess. They run about $12-15 shipped, so definitely a cheaper option than a lot of places. Here's a link: http://www.thickassglass.com/collections/adapters-1/products/double-male-adapter
- Status