Discontinued The RBT Milaana (unregulated single 18650)
- Thread starter RastaBuddhaTao
- Start date
- Status
MonkeyTime
Well-Known Member
Got you covered @MonkeyTime !Replied to PM with details.
@DDave I knew you rocked, but you truly are a rockstar!
lazylathe
Almost there...
After an extended hiatus from my Blue Milaaana, we are re-united again!
I am trying to cut down my consumption and am trying to use on-demand convection vapes to allow me to do this more easily.
This morning at 9am i had a tiny bit of my homemade BHO and it was delicious!
Then nothing throughout the whole day, still feeling good from that tiny bit of BHO.
Now it is 7Pm and i am having a tiny bowl of Executive God.
Started very slow and the flavor was crazy!!! I had about 4 hits of pure flavor and the bowl was 90% green with only 2 tiny darker spots!
Empty bowl and stir and go again. Hotter this time to work it to the end of the bowl!
I start with a 7 second inhale from button push and finish the bowl with a 3 second preheat and then 7 second draw. Always spinning the stem to achieve an even browning.
Think i will have to bust out my fake battery set up again!
I am trying to cut down my consumption and am trying to use on-demand convection vapes to allow me to do this more easily.
This morning at 9am i had a tiny bit of my homemade BHO and it was delicious!
Then nothing throughout the whole day, still feeling good from that tiny bit of BHO.
Now it is 7Pm and i am having a tiny bowl of Executive God.
Started very slow and the flavor was crazy!!! I had about 4 hits of pure flavor and the bowl was 90% green with only 2 tiny darker spots!
Empty bowl and stir and go again. Hotter this time to work it to the end of the bowl!
I start with a 7 second inhale from button push and finish the bowl with a 3 second preheat and then 7 second draw. Always spinning the stem to achieve an even browning.
Think i will have to bust out my fake battery set up again!
@Trustin Judeau it was unfortunate that your repair unit was mixed up with another repair unit. The process has been updated to prevent this in the future so thanks for bringing it to our attention. RBT made attempts to offer you a discount on a new unit and ultimately provided you a full refund. We are saddened that wasn't sufficient in your mind but please understand RBT's decision not to send out a free unit to you as you demanded. I understand that companies moving large volumes of low cost vaporizers employ a practice of providing free vaporizers to unhappy customers. However, RBT is unable to given the hand made nature of our current products.
Hopefully in time you will appreciate the free repair as it was in attempts to rectify the situation.
Peace,
Ryan Dunham
Edit: RBT products continually improve via rapid customer feedback driving agile flexible manufscturing. The turbulator is just one of the many improvements along the way. The change will not be distinctly identified as it is not a model change as opposed to if a 14 mm Milaana was done.
Hopefully in time you will appreciate the free repair as it was in attempts to rectify the situation.
Peace,
Ryan Dunham
Edit: RBT products continually improve via rapid customer feedback driving agile flexible manufscturing. The turbulator is just one of the many improvements along the way. The change will not be distinctly identified as it is not a model change as opposed to if a 14 mm Milaana was done.
Last edited:
Safety Pick Request Link
Attention Milaana Owners: Click the link above and fill out the form on @RastaBuddhaTao website to request your Safety Pick.
Click the link below for appropriate listening material while filling out the form:
Attention Milaana Owners: Click the link above and fill out the form on @RastaBuddhaTao website to request your Safety Pick.
Click the link below for appropriate listening material while filling out the form:
TeeJay1952
Well-Known Member
More factory recalls should have videos or themes!
oddjobold
Vape swap shop
Apologies if this has been asked before. The inner glass section has come away from the rest of the wood section on my milaana. Looks like it was held in with some kinda glue. On the website they say they use Loctite M-121HP. Finding that hard to get in the UK. Any other suggestions?
grokit
well-worn member
@oddjobold, try a google search for "high heat food grade epoxy" 
MonkeyTime
Well-Known Member
Contact who you bought it from, they made some changes in how they glued it and it could be an easy solution.
That's not a commonly marketed glue, it's an industrial item.
MonkeyTime
Well-Known Member
Seems I'm double posting 12hrs apart..... but I had to say something 
After the USPS teased me with the wrong delivery date(s), my two @DDave V3 kits showed up this afternoon. I just happened to be home to receive them, what were the odds.
As expected and claimed by others, they're really great! I've got a pair of V2's that I use with everything, and had gotten in the habit of just using a short piece of tubing pushed into the cooling unit and then over one of his custom stems. They worked great, but it added length, parts and silicon to clean.
The V3's give the same great dry cooling
in a convenient single GLASS piece 
Another happy mod'er here you 'ol rockstar
After the USPS teased me with the wrong delivery date(s), my two @DDave V3 kits showed up this afternoon. I just happened to be home to receive them, what were the odds.
As expected and claimed by others, they're really great! I've got a pair of V2's that I use with everything, and had gotten in the habit of just using a short piece of tubing pushed into the cooling unit and then over one of his custom stems. They worked great, but it added length, parts and silicon to clean.
The V3's give the same great dry cooling
in a convenient single GLASS piece Another happy mod'er here you 'ol rockstar
My Friend, if it weren't for Rocking Vapers like yourself, I'd have nothing to Rock! So, in turn, I thank you sir!Another happy mod'er here you 'ol rockstar
little maggie
Well-Known Member
The v3 is ready? How did I miss that??? I'm off to buy.
duckTape
Well-Known Member
I just got my 2nd Milaana figured I needed a back-up and was lucky enough to buy one of @natural farmer with lifetime warranty 
Does anyone know of a close to perfect, if not perfect case for the Milaana? I don't mind having stem and battery straight in my pocket (In a 18650-case of course). I'm looking for something that fits my pocket.
Still want a walnut or spalted Milaana too though, so I can see how people end up with 3-4 of these beautiful ladies
Hope everyone is having a beautiful day
Edit:
Another question; When I'm having dos units, do I just fill in the safety-pick form twice or?
figured I needed a back-up and was lucky enough to buy one of @natural farmer with lifetime warranty Does anyone know of a close to perfect, if not perfect case for the Milaana? I don't mind having stem and battery straight in my pocket (In a 18650-case of course). I'm looking for something that fits my pocket.
Still want a walnut or spalted Milaana too though, so I can see how people end up with 3-4 of these beautiful ladies
Hope everyone is having a beautiful day
Edit:
Another question; When I'm having dos units, do I just fill in the safety-pick form twice or?
Last edited:
Never a bad idea to have a backup Milaana!
In terms of the Safety Pick Form, I would write the country in the field specified and also in that field note that you have 2 Milaana.
hippogriff
Well-Known Member
This case is a tight fit on the Milaana only.I just got my 2nd Milaana
Does anyone know of a close to perfect, if not perfect case for the Milaana? I don't mind having stem and battery straight in my pocket (In a 18650-case of course). I'm looking for something that fits my pocket.
Still want a walnut or spalted Milaana too though, so I can see how people end up with 3-4 of these beautiful ladies
Hope everyone is having a beautiful day
Edit:
Another question; When I'm having dos units, do I just fill in the safety-pick form twice or?
And this one fits the above case plus a standard two-battery case, another for a couple short stems, and room for a flower container:
Pocketable is subjective, I wouldn't pocket a bare Milaana myself, but I'm very happy w/ this setup.
grokit
well-worn member
If you want to carry the stem and extra battery with your milaana, plus maybe a small charger, stash, or grinder and you want to keep your hands free, there's a whole world of fanny packs out there
GetLeft
Well-Known Member
1 milaana 2 milaana 3 milaana 4.
duckTape
Well-Known Member
Thanks for the tip @cannabis.pro I did what you said 
@hippogriff Perfecto !! That was just what I was looking for Thanks a lot!
Edit; The smallest case doesn't ship to my country :/
@grokit For mountain hikes a fanny pack would be perfect, but the last thing I need when out in public is more questions than necessary No hating though, it's just.. You know,, a fanny pack 
@GetLeft
Milaana every minute, Milaana every hour, Milaana in the shower - Go Go Milaana power !!!
@hippogriff Perfecto !! That was just what I was looking for
Thanks a lot!Edit; The smallest case doesn't ship to my country :/
@grokit For mountain hikes a fanny pack would be perfect, but the last thing I need when out in public is more questions than necessary
No hating though, it's just.. You know,, a fanny pack @GetLeft
Milaana every minute, Milaana every hour, Milaana in the shower - Go Go Milaana power !!!
Last edited:
Crap the only thing I can think of is the freezer. Hopefully once everything is cold enough it might come out... but I assume that this was included in tried everything?
You could try some food grade penetrant I have some stuff called INOX that claims it has a food safe version. It will probably stink out the unit though so
Good luck to your friend.
Tap on it gently with something wooden, like the end of a wood or bamboo kitchen tool.
sickmanfraud
Well-Known Member
Would a few good bangs on the bottom of the MI make the stem come out (Like the method of banging a wine bottle on the bottom to force the cork out if you have forgotten the corkscrew)?
If you try this, do it directly over a bed or other surface that will not smash the stem when it leaves the vape.
If you try this, do it directly over a bed or other surface that will not smash the stem when it leaves the vape.
grokit
well-worn member
What about heating it way up with a fresh battery at the same time...Crushed ice cubes inside the stem to make it cool down and contract slightly?Unsure it would even work...
Good luck
- Status