Discontinued The RBT Milaana (unregulated single 18650)

[MonkeyTime]

I've got two wooden dowels, one for each long and short stems. I then use small iso pads that are about .75" x 1.25", they're made for administering shots and such. I swab down the stem cleaning it and pushing out the screen. A couple of drops of the screen on the counter and I wipe off all of the glass fittings around with the pad and I'm done.

The whole process takes maybe a minute, I carry the pads and the short dowel with me all the time in my case. I clean at stop lights all the time

The pads are cheap and I use one ever third day or so. A box of a hundred would last a year if I didn't use them for so many other things

 

[CarolKing]

@stickstones here is a closeup of the GonGs. While looking at them, I notice two of them are about a 1/4 of an inch shorter than the other two. Just realized it. These work pretty well with my Malana. It doesn't really change the draw but they seem really solid. A firm pack will work awesome.

Just touch link below. Damn these updates for the iPad.

http://i.imgur.com/FfIuriT.jpg

 

[stickstones]

Those are sweet...thanks!

 

[RastaBuddhaTao]

Thanks to all who contributed to the logo and the slogan. @RBTCustomerService has compiled a list of all the slogans and we have selected the top three and will be contacting you via PM to get your address for a token gift.

Much of the content submitted will be used in the future as model specific tag lines and content... We all know Effortlessly Versatile is an RBT classic. So, with that we proudly feature the RBT tag line here first...

RastaBuddhaTao - Against the Grain

 

[Shit Snacks]

Thanks to all who contributed to the logo and the slogan. @RBTCustomerService has compiled a list of all the slogans and we have selected the top three and will be contacting you via PM to get your address for a token gift.

Much of the content submitted will be used in the future as model specific tag lines and content... We all know Effortlessly Versatile is an RBT classic. So, with that we proudly feature the RBT tag line here first...

RastaBuddhaTao - Against the Grain

Fuck that's good. Perfect for RBT, vaping against the grain in the best way, excellent double meanings, very well done

Gonna celebrate the slogan and vape against the grain with the effortlessly versatile original, Zion Looking forward to Milaana slogan

 

[Mr.Sifter]

Do you know where one can buy a milaana right now?

They are out of stock everywhere i look.

 

[AJS]

RastaBuddhaTao - Against the Grain

Ugh .... Yes.
You really know how to polish my grains. I know I'll be rubbing my wood tonight in honor.

Big milestone! I like the idea of holding onto other "slogans" as possible headlines for pictures or quotes for advertising or whatever else you could think of. Should really add a good character to the Milaana. I think people will get a good understanding of what this vape is, emotional and practically, through some of the slogans mentioned.

With that said, my @DDave mod is out for delivery. This is my FIRST addition to the Milaana. Well ... Except for my m2m and the little nut I added to replace the washers that I didn't enjoy...but just cosmetic with some added conveniences to the battery loading / unloading process. I am SO excited for this arrival. First thing I do when I get home late tonight is (gracefully) shredding open that box and (gracefully) ripping the shit out of my Milaana.
Video .. To .. Come.

 

[Copacetic]

Do you know where one can buy a milaana right now?

They are out of stock everywhere i look.

http://www.420edc.com/rbt-milaana/rbt-milaana

 

[cannabis.pro]

http://www.420edc.com/rbt-milaana/rbt-milaana

We literally have a handful remaining. Newest iteration of units with newest instructions, 3 year warranty and packaged in a sweet metal tin (lid doubles as a rolling tray).

 

[VegNVape]

Thanks to all who contributed to the logo and the slogan. @RBTCustomerService has compiled a list of all the slogans and we have selected the top three and will be contacting you via PM to get your address for a token gift.

Much of the content submitted will be used in the future as model specific tag lines and content... We all know Effortlessly Versatile is an RBT classic. So, with that we proudly feature the RBT tag line here first...

RastaBuddhaTao - Against the Grain

Yeah I love it too! Well done RBT. It sounds just right for you in so many ways!

All aboard!
​

Gonna celebrate the slogan and vape against the grain with the effortlessly versatile original, Zion

I'm right there with you, bro!

​

MuchLove

 

[Mr.Sifter]

Hello 420edc.
How much is shippong to france or germany?

 

[cannabis.pro]

Hello 420edc.
How much is shippong to france or germany?

Let me check on that for you.

Do you need extra batteries or the Free Charger?

May be able to get it to you at 1st Class Insured, but it is the slower boat. Priority Mail Insured is going to be $39 which would be the quickest most affordable. Express which would be fastest is $59.

 

[duckTape]

I think i just picked up the last Milaana at planetvapes.ca I'm so excited!!!! This will be my second vaporizer and I think it's going to kick my ass,, woop woop Never even tried a desktop before, only the Haze (which I love <3

Looking forward to join the Milaana-Crew

 

[nosmoking]

We literally have a handful remaining.

Is it wrong that I am trying to figure out how many Milaanas I can fit in a hand? I only have two to try with but I feel like I could fit at least one more...

 

[Bravesst]

It's posts like these that make me so glad I got 4?

We literally have a handful remaining. Newest iteration of units with newest instructions, 3 year warranty and packaged in a sweet metal tin (lid doubles as a rolling tray).

 

[VegNVape]

(lid doubles as a rolling tray).

Ha! Directly targeting potential combustion to vapor converts?

Smart move with the Milaana!

 

[Philreal187]

Congrats @RastaBuddhaTao & @RBTCustomerService on getting a professional documentary team on board! Excited to see the outcome! Like the slogan and the new wood bodies are amazing!! Keep up all the great work!

Heres some sweet seasonal eye candy!!

 

[mucsusn]

We literally have a handful remaining. Newest iteration of units with newest instructions, 3 year warranty and packaged in a sweet metal tin (lid doubles as a rolling tray).

Just ordered Milaana #2 plus some batteries and colored short stems.........psyched!

 

[VegNVape]

Wow! I certainly philreal good after checking out your awesome photos, bro!

Very nice!

Your gorgeously customized Milaaana along with that sexy looking zebra wood Ed stem/WonG . . . plus straw & pumpkins?!!

That's straight up x-rated!

And judging from what I've seen in a certain other thread, I'm thinking you've definitely got a thing for pumpkin!

Happy Hallowen bud!

 

[AJS]

Got my @DDave mod! Was fun testing it out. I'm aware the audio is pretty bad, but it's there for those who want to hear. Online recorders don't do well unfortunately.

The 14mm reducer is a LOT of fun, being able to pack such tiny amounts. Mine isn't a perfect fit, it sits high on the reducer, allowing a little bit of airflow to come in. During use, I could not notice though.

The 18mm is the tits. The smaller mouthpiece lets me side-of-the-mouth chillnvape. It seems more casual and is easier on my throat. Flavor seems to be either on par or better than the stock stems, but it's hard to tell. All I know is, it was extremely enjoyable, and it will most likely be replacing my stock stems. Airflow isn't reduced much, still feels totally open, although, my recent grasshopper use has skewed my sensitivity towards airflow because it's significantly more restricted than Milaana, so maybe there is a bigger difference in airflow than I am noticing. More practice to come, of course.

The cooling wand is VERY smooth. There is no feedback at all using this unless you use a light, so tread with caution. I, personally would probably prefer to get an 18mm-14mm m2m and use it directly like that instead of with silicon and stems. @DDave If one were to add water...is it spill proof? I think that would be my dream at home setup... I figured it was a dry wand, but if water can be safely added, it would be fun to experiment more

 

[WakeAndVape]

Now that we have a RBT slogan on deck...

For the milaana I think a perfect slogan would be:
Mi vape, your mouth.

But to be fair I'm posting high again!

 

[DDave]

Got my @DDave mod! Was fun testing it out. I'm aware the audio is pretty bad, but it's there for those who want to hear. Online recorders don't do well unfortunately.

The 14mm reducer is a LOT of fun, being able to pack such tiny amounts. Mine isn't a perfect fit, it sits high on the reducer, allowing a little bit of airflow to come in. During use, I could not notice though.

The 18mm is the tits. The smaller mouthpiece lets me side-of-the-mouth chillnvape. It seems more casual and is easier on my throat. Flavor seems to be either on par or better than the stock stems, but it's hard to tell. All I know is, it was extremely enjoyable, and it will most likely be replacing my stock stems. Airflow isn't reduced much, still feels totally open, although, my recent grasshopper use has skewed my sensitivity towards airflow because it's significantly more restricted than Milaana, so maybe there is a bigger difference in airflow than I am noticing. More practice to come, of course.

The cooling wand is VERY smooth. There is no feedback at all using this unless you use a light, so tread with caution. I, personally would probably prefer to get an 18mm-14mm m2m and use it directly like that instead of with silicon and stems. @DDave If one were to add water...is it spill proof? I think that would be my dream at home setup... I figured it was a dry wand, but if water can be safely added, it would be fun to experiment more

@AJS

Thanks for the feedback and that was an awesome video! Four nice rips from the 14mm basket load! And I'm microdosing it for now, so your use of the 18mm basket packed just had me like .

Have some comments on things you mentioned...

- Putting water in the cooler. Yes, it does hold water, but I'd really recommend against it. The first being the safety of the Mil. It's a portable and I wouldn't trust myself to hold it stable enough to avoid a mishap. The second is flavor. You had mentioned in the video that using it dry it only felt as of you had breathed in cool air. And that was on a bowl that had been twice drawn on already. Normally, by 3rd draw I can taste the degrade of flavor compared to a fresh bowl. Same experience I had while testing dry, but also noticed I got more flavor. (Yes, I tried it a couple times with water.. but only 14mm setup and microdose levels..) So for the safety of the Mil and preservation of flavor... my vote is "go dry".

- Stem to Silicone to Stem: I did think of replacing it with a 14mm/18mm Male/Male. Then there were two aspects of having this configuration that were too important to discard. The first is that the setup allows for a bit of flex. If you had solid glass to solid glass to Mil, what you have in essence is a long glass tube. When inserted into the Mil, it becomes like a lever, with the pivot point being the rim of the Mil oven. With the principle of leverage in that setup, a small amount of sideways pressure on the mouthpiece side of the wand would equal a huge amount of force on the Mil oven glass. So, the silicone middle piece allows some "give" in the whole length of the wand and greatly reduces any leverage on the oven glass. The other benefit is that no matter how hot the Cooling Wand becomes (that heat has to go somewhere), the silicone piece remains cool to the touch. Gives a constant place to hold the wand, no matter how hot it is. That is why I retained the Stem to Silicone to Stem setup.

- Finally, don't miss out on a hidden benefit of that keck clip! It does a great job of holding that wand together, but it has a far more important role to play. It also keeps the wand from rolling off a table.

Hope this info helps! Again, that was a really awesome video!

Enjoy!

 

[vapen00b]

@AJS great review, thanks man!


@DDave Hi man, this V2 kit looks really cool. Being an international and having some pieces/comparable ones already, would it be possible to just order the stems and screens? I imagine postage could be significantly cheaper that way also? Happy to PM you about this on our former V1 conversation, just thought it might be of interest for more people. Thanks a lot!

 

[AJS]

@AJS

Thanks for the feedback and that was an awesome video! Four nice rips from the 14mm basket load! And I'm microdosing it for now, so your use of the 18mm basket packed just had me like .

Have some comments on things you mentioned...

- Putting water in the cooler. Yes, it does hold water, but I'd really recommend against it. The first being the safety of the Mil. It's a portable and I wouldn't trust myself to hold it stable enough to avoid a mishap. The second is flavor. You had mentioned in the video that using it dry it only felt as of you had breathed in cool air. And that was on a bowl that had been twice drawn on already. Normally, by 3rd draw I can taste the degrade of flavor compared to a fresh bowl. Same experience I had while testing dry, but also noticed I got more flavor. (Yes, I tried it a couple times with water.. but only 14mm setup and microdose levels..) So for the safety of the Mil and preservation of flavor... my vote is "go dry".

- Stem to Silicone to Stem: I did think of replacing it with a 14mm/18mm Male/Male. Then there were two aspects of having this configuration that were too important to discard. The first is that the setup allows for a bit of flex. If you had solid glass to solid glass to Mil, what you have in essence is a long glass tube. When inserted into the Mil, it becomes like a lever, with the pivot point being the rim of the Mil oven. With the principle of leverage in that setup, a small amount of sideways pressure on the mouthpiece side of the wand would equal a huge amount of force on the Mil oven glass. So, the silicone middle piece allows some "give" in the whole length of the wand and greatly reduces any leverage on the oven glass. The other benefit is that no matter how hot the Cooling Wand becomes (that heat has to go somewhere), the silicone piece remains cool to the touch. Gives a constant place to hold the wand, no matter how hot it is. That is why I retained the Stem to Silicone to Stem setup.

- Finally, don't miss out on a hidden benefit of that keck clip! It does a great job of holding that wand together, but it has a far more important role to play. It also keeps the wand from rolling off a table.

Hope this info helps! Again, that was a really awesome video!

Enjoy!

That's totally understandable. Just tried a 14mm sesh with the cooling wand, and it's not even like a neutral air temperature, it's completely cold. It's kinda ridiculous. It's really hard to control, but I got a head poundingly fat hit and thought I was ripping without the button pressed. Quite fun...sure can catch you by surprise.

Used the keck clip too, definitely felt more secure and I felt the pivot too.

Glad you enjoyed the video! Was fun as hell making it.

 

[duckTape]

And good thing, too! I'm under the impression that quite a few people watch your videos, enjoy your reviews, and rely on you for knowledge on some of the harder hitting vapes out there. Wouldn't doubt if some of your cloud videos got people runnin' this way!

@WakeAndVape 's clouds actually got me here! But youtube user IAmKrazy2 is also guilty, not sure what his fc-name is if he has one.. of course he's got one..