kushcabbage
vapor nerd
cow-a-bunga try the setting right above 5 but not quite to 6. And yes, they are supposed to come with two, and extra would have gotten you three.
Discontinued The Inhalater INH004 Phytotherapeutic Rechargeable Portable Vaporizer
- Thread starter Dogman
- Start date
Vapor Junkie
Active Member
Maybe try a bit more than .1, like .2 or .25... and a bit more temp. Where did you purchase? It's supposed to come with 2, so you should have received 3. If you bought from theothersidevapes, you'll have no problem getting it shipping to you asap.
Nice! I'm wondering if I should get a similar adapter, or use an Arizer Extreme-q elbow. My plan includes using this with a VXC Hydratube, so i'd be popping it in the bottom. i'm thinking the elbow might be more ideal but i'm not sure.
Think vapour under 6 CeniZen? 6-10 ideal? How would you relate it to the Solo? If the Solo kept me happy from temp setting 3-5, where would that be on the dial on the INH?
Also, perhaps there are some differences between units? Especially with respect to the temp dial/sticker?
Also, perhaps there are some differences between units? Especially with respect to the temp dial/sticker?
Slightly Medicated
(SliM) Iron Lungs
I start at 6 and work my way up to MAX over 10-15 minutes.
Slightly Medicated
(SliM) Iron Lungs
Thanks CZ! That sounds pretty awesome... and Solo on level 2 i suppose will be about a 4-5 on the inh?
SliM, do you have a destroyed capsule yet? lol What's next, this or the MiniVap or something else in your collection?
The one capsule is still going strong. I picked up some extras. They seem pretty durable. Eventually over time it will break though. I thought I had a chip in one of mine but it was just a flake of something else. I have squeezed this one every time I remember to when I walk by. Lasted quite a long time.
Here are the temperature comparisons:
On The Inhalator INH004:
Original Version (Temperature Knob shows 1-7, then Max):
1- 284F
2- 300F
3- 315F
4- 331F
5- 345F
6- 361F
7- 376F
Max- 392F
Updated Version, As of July 13, 2012 (Temperature Knob shows 1-9, then Max):
1- 284F
2- 297F
3- 309F
4- 322F
5- 334F
6- 347F
7- 356F
8- 369F
9- 381F
Max- 410F
and
On the Solo:
Temp Level 1: 50° C / 122° F
Temp Level 2: 185° C / 365° F
Temp Level 3: 190° C / 374° F
Temp Level 4: 195° C / 383° F
Temp Level 5: 200° C / 392° F
Temp Level 6: 205° C / 401° F
Temp Level 7: 210° C / 410° F
Slightly Medicated
(SliM) Iron Lungs
I find 3 on the Solo is more like 6 or 8 on the inhalator INH004. Kind of hard to compare though because the draw on them is so different. You have to draw harder on the Solo then you do on the INH004. It all depends on the technique and such... if you go with the best technique for each device though I find that 3 is pretty close to 6-8. The thing about the INH004 is it is much better at extracting vapor at the lower temperatures.
That sounds great. Although my feelings are that it just doesn't get as hot as the Solo?
Also, my biggest beef with the Solo was the waste while not drawing, so i'd have to remove the stem after every inhale. Is the INH similar in that you should remove the capsule as to not see vapour being wasted?
Sounds like i'd use the INH at 6 to max like you and CZ.... with no vapour under 5, I wonder what those temps are even for? lol
Also, my biggest beef with the Solo was the waste while not drawing, so i'd have to remove the stem after every inhale. Is the INH similar in that you should remove the capsule as to not see vapour being wasted?
Sounds like i'd use the INH at 6 to max like you and CZ.... with no vapour under 5, I wonder what those temps are even for? lol
2clicker
Observer
what about these...? http://www.mcmaster.com/#vinyl-end-caps/=irhgzw
whats the OD on the capsules?
this thread is growing fast and im really excited about the reviews ive been reading. likely going to be pulling the trigger on one of these soon.
Vapor Junkie
Active Member
10mm OD, roughly 25/64" or just over 3/8"
2clicker
Observer
then i would use part #84735K16 from this page http://www.mcmaster.com/#vinyl-end-caps/=irhgzw
high temp to boot
This is starting to sound better to me than the Pax does. I've got a few questions though:
While the unit is heating up, can the capsule be out of the unit? So you can pack it while waiting for it to heat up, then install and use?
What keeps the herb in the capsule? If you hold it vertically, with the mouthpiece at the top-will it all fall out?
Some of us don't use .25g in a session, or even .1g. Would this work as a one hit vape? Will it work with a very small amount, like a log vape - like 0.03g?
THX
While the unit is heating up, can the capsule be out of the unit? So you can pack it while waiting for it to heat up, then install and use?
What keeps the herb in the capsule? If you hold it vertically, with the mouthpiece at the top-will it all fall out?
Some of us don't use .25g in a session, or even .1g. Would this work as a one hit vape? Will it work with a very small amount, like a log vape - like 0.03g?
THX
Kaptan
Well-Known Member
Yes, but you may want to wait about 10 seconds after inserting the capsule before use as there is partial conduction and the light will signify when ready.
You insert and remove the capsule with the INH upside down so no herb falls out. The herb will touch the bottom, but there is a screen in place at the bottom. Also on every inhale, the herb will be sucked towards the mouthpiece due to vacuum. You may find a few bits on the screen, but a light tap knocks em out. I've also followed CZ advice and placed a fine screen at the bottom to keep the bottom clean and prevent bits from getting through.
No, it wouldn't be well suited for a one hitter. It does work well with a half capsule (about .15), but I wouldn't use much less.
Dreamerr
Always in a state of confusion and silliness♀
Off Topic I want to know what scale you all use? I have one of those small ones and a postal and neither like to measure anything that small. I can do if I remember correctly a gram or more with issues. Do I need to do something special to make it recognize such a small amount?
Metphisto said it would work for a one or few hitter. Please say it isn't so. I need to take hits throughout the day and was looking for the few hitter to go along with my DV. I am not thrilled with the MFLB anymore.
Metphisto said it would work for a one or few hitter. Please say it isn't so. I need to take hits throughout the day and was looking for the few hitter to go along with my DV. I am not thrilled with the MFLB anymore.
t-dub
Vapor Sloth
I shop here, these guys are great. Biggest decision you will have to make is if you want to go portable or not, what level of precision you require, and what $$ range. These folks are very helpful but I have never mentioned cannabis to them.
Kaptan
Well-Known Member
it can be used to take a few hits here and there, but it would be best to remove the capsule in between so no vapor is wasted while sitting in the hot chamber.
Kaptan
Well-Known Member
IME, it is much less. When you take the capsule out, the temp of the capsule drops very quickly. In about 10 seconds, the polyamide part of the capsule can be handled comfortably.
Kaptan
Well-Known Member
There is no noticeable vapor coming out of the mouthpiece when not drawing on it, but with an 8 minute timer why sleep on it? If you do take a couple of hits and leave it on 9-max, I'm sure some conduction would occur, but not nearly as bad as the Solo.
Dreamerr
Always in a state of confusion and silliness♀
Kaptan, correct me if I am wrong but I remember mephestio saying take out the capsule take a hit or two to cool it by that time the inhalator will also be cooled and just put it back in with now lose. It this true to your knowledge or can you check it out?