Saionara Atomizer thread

[corwin33]

Hi
Do you know an EU supplier?
I will essentially vape rosin, because it's the only concentrate i can find in my state.. do you recomend some coils (for rosin)?
I wrote to HVT but their response disapointed me.. plus lots of coils or parts are out of stock on most websites...
is there a nice alternative you could rercomend me?

thank for your response

 

[Dan B]

Hi
Do you know an EU supplier?

This place sells the Shenzhen Crossing version from Germany:
https://verdampftnochmal.de/SZ-Crossing_1

And this place from the UK (shows HVT pictures but is apparently Shenzhen Crossing):
https://www.urbanistic.co.uk/collections/vendors?q=Humboldt Vape Tech

 

[corwin33]

hi Dan
thanks for awsering me
do you recomend specific coil for rosin
do you know an EU supplier for coils because those 2 website have a very limited choice...
for those in eu, find this website too : https://recommendedvapesupplies.co.uk/collections/hvt
but not very much coils to choose...

 

[Dan B]

hi Dan
thanks for awsering me
do you recomend specific coil for rosin

Thanks. I think most people prefer the bucket coils. Quartz has the best flavour but in my experience it gets messy quicker than with the titanium bucket, but some people manage to get it working well. The bucket coils only work with the Top Air Flow version, by the way.

 

[corwin33]

ok thanks for the advice
will order one asap
btw i chat with a guy at puffitup and he told me that they will restock coils in the next weeks

 

[mobilrog]

just ordered a top airflow sai and it should be here Thursday. looking forward from switching my VAS to concentrate devices.

 

[mobilrog]

my sai and pico arrived. first impressions suck, but I know its all user error. how should I set this up? im on temp ti mode. 25w at 450. when I hold the button down it keeps saying temp is to high, is that a normal thing?

 

[tennisguru1]

my sai and pico arrived. first impressions suck, but I know its all user error. how should I set this up? im on temp ti mode. 25w at 450. when I hold the button down it keeps saying temp is to high, is that a normal thing?

NI not TI .. if it's a bucket your heating?
33 watts... 380 -420

 

[mobilrog]

NI not TI .. if it's a bucket your heating?
33 watts... 380 -420

Ooooh. Maybe that’s where I’m getting it wrong. I do have it set on ti and not ni. I assumed a titanium bucket meant titanium coil

 

[tennisguru1]

Ooooh. Maybe that’s where I’m getting it wrong. I do have it set on ti and not ni. I assumed a titanium bucket meant titanium coil

The wire in the donut under the Ti cup closest is Nichrome settings.
If you use TCR 315 it will correctly hit TC #'s Wts 33 temp 380 - 440
Higher for quartz.

 

[mobilrog]

holy hell what a difference. man, I can always count on FC for being there to correct my mistakes. thank you for the help.

the thing rips hard now.

 

[mobilrog]

The wire in the donut under the Ti cup closest is Nichrome settings.
If you use TCR 315 it will correctly hit TC #'s Wts 33 temp 380 - 440
Higher for quartz.

makes sense. how long does a normal coil last?

 

[tennisguru1]

makes sense. how long does a normal coil last?

https://www.reddit.com/r/Waxpen/wiki/saiguide


Stay away from the flat plate heaters from the quartz buckets
The donuts can last a month to a year depending,
Read the guide to avoid cracking them

 

[Polarbearboy]

Just ordered the EZ Sai Kit with the triple titanium and Kanthal coils from POTV and some accessories like wpa from Humbolt. Never done concentrates before and nobody in my little crowd of old hippies has ever used them either. I see the nearest legal adult dispensary now carries UKU oils, Sira shatter, Sira crystals, and UKU wax. Can I use all of these in my new toy? Which stuff with which coil? Which would you try first?

 

[BestBuds]

I have a b.a.f. sai can I buy something to make it a t.a.f. sai?

 

[adidaspimp]

I believe you can purchase a TAF bucket and cap to swap. Fairly simple. No special conversion kit needed. just the replacement parts you can order anywhere that stocks the Sai, like puffitup.

 

[CalyxSmokr]

Just ordered the EZ Sai Kit with the triple titanium and Kanthal coils from POTV and some accessories like wpa from Humbolt. Never done concentrates before and nobody in my little crowd of old hippies has ever used them either. I see the nearest legal adult dispensary now carries UKU oils, Sira shatter, Sira crystals, and UKU wax. Can I use all of these in my new toy? Which stuff with which coil? Which would you try first?

you can use anything but shatter and wax are easiest on a coil. avoid anything runny

 

[Polarbearboy]

My EZ Sai from POTV just came. Surprised the mail lady was here, as we've got six or seven inches of new snow still on the road. This baby is a heavy little sucker. How do I know how much the battery is charged? And how do I access the battery so I can change it or charge it out of the device? The instructions are minimal. Thanks. The EZ Sai looks and feels solid and like fun. I'm not headed to a dispensary until next week--can't wait to try it out.

 

[CalyxSmokr]

My EZ Sai from POTV just came. Surprised the mail lady was here, as we've got six or seven inches of new snow still on the road. This baby is a heavy little sucker. How do I know how much the battery is charged? And how do I access the battery so I can change it or charge it out of the device? The instructions are minimal. Thanks. The EZ Sai looks and feels solid and like fun. I'm not headed to a dispensary until next week--can't wait to try it out.

https://humboldtvapetech.com/product/ezsai-bubbler-kit/ is where I would look. I think you just plug it in and no removable battery. Probably will indicate when done charging somehow.

 

[Megaton]

Has anyone else round these here parts had any issues with running their Sai on a DNA 200 mod? it works perfectly on my P80, but Temp mode just displays 'OFF' on my dna mod! Wondered if any one had any suggestions?

 

[adidaspimp]

Has anyone else round these here parts had any issues with running their Sai on a DNA 200 mod? it works perfectly on my P80, but Temp mode just displays 'OFF' on my dna mod! Wondered if any one had any suggestions?

if you'll upload your profile I can take a look at it and see what's going on.

easier for me that way vs the back and forth of questions and all that jazz

 

[Polarbearboy]

Finally got my hands on some concentrates yesterday from the big adult retail ATG dispensary in Salisbury, MA. Lovely Black Mambo rosin. Did some burn-offs with my EZ Sai. Then put a rice-grain sized piece of rosin on the triple coil. OMG! Absolutely delicious huge hit, and that's at the lowest temp setting. One of the greatest smoothest hits I've ever experienced in a long long life of taking heavy hits. And so easy.

I'm away from home and so don't have all my gear to play with. Can't wait to get home--except its just gorgeous out here at the tip of Cape Cod--to my Humbolt water pipe adapter and other toys to continue this experiment. I also got some lovely looking shatter to try and will stop by ATG on my way home for some wax to try. Great fun!

 

[wm762]

how do i fix this problem. the bucket is out of the coil. the white bucket thing is now stuck inside the atomizer. how do i pull it out? i am using a coin and it is stuck. see photos to refer what I am saying when the bucket is out of the coil. how do i remove?

 

[adidaspimp]

Are you able to fire (not with actual fire just press trigger ) the mod and heat it up a bit? From the looks of it you've got some gunk built up which has created a seal...a sticky seal. If you're able to warm it up you should be able to break the seal.

 

[GerVn_Vap0rist]

These are my settings. With a Ti bucket. It’s facemelting with big ass clouds Hahahaha