Discontinued RBT Splinter (All Versions)
- Thread starter RastaBuddhaTao
- Start date
CanikUser19
Trenchtown Rock
How many adapters are you running there, looks like 3?A bud just sold me his 19/19 joint to 14 mm adapter and I'm loving the Z on my glass tower - I call it "The Leaning Tower of Z"
Mad_Max
Well-Known Member
Haha, yeah that TAG 14 mm/18 mm adapter is huge and looks like 2. There's the TAG dropdown ash catcher, the 14/18 adapter, then the WPA is all.
CanikUser19
Trenchtown Rock
Get yourself a double male 18mm to 14mm wpa adapter and eliminate some of the height and stress on your glass. Nice setup though, just don’t wanna see your leaning tower come crashing down.Haha, yeah that TAG 14 mm/18 mm adapter is huge and looks like 2. There's the TAG dropdown ash catcher, the 14/18 adapter, then the WPA is all.
Canna Chameleon
Muted by mods. Run off by rudeness.
Try this.Haha, yeah that TAG 14 mm/18 mm adapter is huge and looks like 2. There's the TAG dropdown ash catcher, the 14/18 adapter, then the WPA is all.
RastaBuddhaTao Water Pipe Adapter
Rasta Buddha Tao Water Pipe Adapter $19.99 CAD - The Herb Cafe is an Authorized Retailer for RBT products. Ships from Toronto, Ontario, Canada. No Duty! Fast and Free Shipping Available! Come check out Canada's largest catalog of top quality vaporizers and accessories!
CanikUser19
Trenchtown Rock
Or these if you break them like meTry this.
RastaBuddhaTao Water Pipe Adapter
Rasta Buddha Tao Water Pipe Adapter $19.99 CAD - The Herb Cafe is an Authorized Retailer for RBT products. Ships from Toronto, Ontario, Canada. No Duty! Fast and Free Shipping Available! Come check out Canada's largest catalog of top quality vaporizers and accessories!theherbcafe.com
NEW | 18mm Male to 14mm Male Glass Adapter | FREE SHIPPING | US SELLER | eBay
Used for connecting a 14mm Female Glass Joint to an 18mm Female Glass Joint. Includes: 1x 18mm male to 14mm male glass on glass adapter.
www.ebay.com
Canna Chameleon
Muted by mods. Run off by rudeness.
Only issue is those are 19/26 and the RBT stuff needs 19/19 or 19/22…ymmvOr these if you break them like me
NEW | 18mm Male to 14mm Male Glass Adapter | FREE SHIPPING | US SELLER | eBay
Used for connecting a 14mm Female Glass Joint to an 18mm Female Glass Joint. Includes: 1x 18mm male to 14mm male glass on glass adapter.www.ebay.com
CanikUser19
Trenchtown Rock
Yeah I’m sure you’ll find various joint lengths on there. The ones I bought are too long for my V1 and V2, but they fit my Z’s perfectly. Not sure about the lengths on mine though. OP is rocking a Z in his pic so that’s why I suggested it.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Good Vibes Boro can cut down joints to fit, and make any custom WPA, cost more with the cutting down of course but worth it imo (had him cut down the male on one of the 18-18 injector bowls I got so I could use it as a 19/19 to female adapter too so I can use any 19/26 male glass with them if I want to)
Mad_Max
Well-Known Member
It's hard to argue with this - it's just waiting for the chance to fall over! (I couldn't find the
ee yourself: emoji) I may have to rename it "The Tower of Terror!"This is a better solution that works and doesn't need an adapter, for about $30 US delivered. But, the Z can take the standard 18 is my understanding, though it I haven't used one. I wonder if it would change the heating dynamics, being right on (or at least closer to) the heater like the v2.Try this.
RastaBuddhaTao Water Pipe Adapter
Rasta Buddha Tao Water Pipe Adapter $19.99 CAD - The Herb Cafe is an Authorized Retailer for RBT products. Ships from Toronto, Ontario, Canada. No Duty! Fast and Free Shipping Available! Come check out Canada's largest catalog of top quality vaporizers and accessories!
I have 2 curved GVB stems, and one of them won't hold a screen, except that out of the dozens of screens I have, there is one that's squished just right to fit in there and still have some decent capacity, otherwise I couldn't use it. Which reminded me that @FearAndLawyering said the same thing about the cut joints can have a larger ID than one made to spec. I guess ymmv. I only have the 2 stems
Last edited:
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
have 2 curved GVB stems, and one of them won't hold a screen, except that out of the dozens of screens I have, there is one that's squished just right to fit in there and still have some decent capacity, otherwise I couldn't use it. Which reminded me that @FearAndLawyering said the same thing about the cut joints can have a larger ID than one made to spec. I guess ymmv. I only have the 2 stems
That is true that it affects the diameter for the screens to fit, but literally every stem I have is different, there is so much variance in the glass, and I have a ton of different basket screens rimmed and rimless from a variety of sources so I can always find something to fit well personally
Petetbay
Well-Known Member
After a bunch of convection discussion I took out the Splinter Z last nite and rocked an old stem I use with custom screens and glass beads for cooling. It‘s a Planet Vape Splinter stem meant for cap use and a 11mm joint length which increases the distance to the heater so nice.
www.planetvape.ca
Canada's Top Vaporizer Shop Best Prices - PlanetVape
PhDFS RBT Vaporizers premium Long and Short Mouthpieces. Flavor Savor design keeps flavor longer. Keep extras on hand to pre load using our 18mm joint travel caps. Splinter, Milaana and Zion Mouthpieces use 19/22 US style joints. Canada and USA
www.planetvape.ca
GoldenBud
Well-Known Member
menu>interface>clicks> set 4 to editI could use some help - I forgot how to set a different mode from M1 to M2 or M3 in Tubo? I now how to set the TCR for each mode but not to actually change it from default/M1.
menu>coils>TCR for setting M2 ..
menu> 4 clicks> click + / - until you reach the option to change to M2
but I really liked TCR 185 for Splinter V2
maybe it will be good for Z
like, locking the resistance 0.016 below cold ... using TCR 185
Mad_Max
Well-Known Member
Yeah I'm doing all that your saying there and TCR 185 is the number for me. I also go .022 under
I got all this from you in the first place!!
Mad_Max
Well-Known Member
No, just when using the V2. I have the Z on another mod with the color display and profiles. I can't figure what the TCR is on it , but it has profiles for maybe 6 devices in there.ah for Z also 0.022? great to know!
I used minus 0.022 for V2
I just now have been vaping with the Predator and V2, using all the numbers except I didn't reduce the resistance, and I combusted bad!
LooseCucumber
Well-Known Member
Smashed my v2 to bits today, it fell on asphalt. Not a big deal, luckily I have a couple units but a reminder to hold RBT products tight outside of home. I used my unit fairly often so I got my money's worth lol
Canna Chameleon
Muted by mods. Run off by rudeness.
@FearAndLawyering can replace the glass. If you decide it’s worth the cost, depending on what you paid and how much you love it.
LooseCucumber
Well-Known Member
Thank you for the suggestion, much love to @FearAndLawyering , I have a couple CX that work great, v2 is the "beater". I was lucky enough to get some cheap Splinters from Ryan during his Black Friday sale in 2021, so one broken Splinter is not the end of the world.
StringTheorista
Well-Known Member
There's a new maker making rbt stems. He's been making well regarded dynavap accessories for a little while
www.reddit.com
Reddit - Dive into anything
www.reddit.com
This is great! @Hookahhead_MD is a member here and even has their own thread:There's a new maker making rbt stems. He's been making well regarded dynavap accessories for a little while
Reddit - Dive into anything
Hookahhead_MD Custom glass vape accessories
Wow these latest look so great, keep it up!!
fuckcombustion.com
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Love it, only 19/22 though so won't fit regular splinter or mi3 unfortunately