I would. Interested in their response. Regardless if user error or not, they might send you a free chamber, since the pivot is new and chambers are cheap.
Pen Puffco Pivot
- Thread starter biohacker
- Start date
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I was just going to say, not sure if you're in California or Florida, but it is a little tricky... They search bags and have metal detectors, if they see it, they will not let you bring it in... So pretty damn annoying and just another reason I hate the theme parks lol you'll need edibles instead (sometimes there are smoke vape sections even, but yeah they have strict no pot policies despite CA state law, they just want to sell you alcohol and their stuff)
Easywider
Simple is the way
Oh yes! lots of it, and it's even flaking into your MP.
Your oil should darken some but you never want it to burn onto the chamber walls.
This has happened to me when using white with too small of a dab. The dab would finish before the timer ended and the small remaining amount of oil would burn. You don't want to run it dry. It can be as simple as one xtra hit when you're at a higher temp. Is your concentrate burning clean in other devices? It could be the product itself. Or just an out-of-spec atty.
terpguy420
Well-Known Member
If there were an after market glass mouth piece, I'd buy the Pivot. I'd prefer not to have silicone in my vapor path.
GoGlass
Well-Known Member
Maybe you have not see this one :
Pivot Spinner Mouthpiece
Premium glass spinner mouthpiece to enhance your Pivot experience, with the easy to install design and simple cleaning process. These durable,...
www.kovacsglass.com
Search Results for “Pivot ” – ALL IN ONE SMOKE SHOP
This is where you can browse products in this store.
www.zeevapor.com
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I shared the ones from HMK glass here, he can make them custom too, also ECH is testing his own mouthpieces now...
This is pretty much exactly what happened to me today but on red. I was getting the last bits out of a jar and only had about half what I normally would use. I used the boost once during the cycle and it was much nastier than every before and took some elbow grease to clean out fully plus 2 extra qtips. I'm going to stay lazy and stick with the 2/3 pea size minimum moving forward.
someTooL
Well-Known Member
Couple of shares from my experiences.
1st, against popular opinion, but I’m not a fan of the SH v3 MP. And really after using, I’d be more of a fan of using a mp requiring the grommet. You have to remove the MP any way so probably be better cutting the stock MP top off and tethering. Seems like popping the glass in and out would eventually tear the silicone too. Really didn’t notice any huge vapor taste or production difference either. I’ve seen a couple that slip over the stock MP that I’d also like to try.
Second, and probably my biggest “oh” moment, is that the @Duba Tempest parchment case fits the Pivot like a glove. For on the go carry this will certainly be my go to. Nice protection and slim fit for the jacket pocket.
1st, against popular opinion, but I’m not a fan of the SH v3 MP. And really after using, I’d be more of a fan of using a mp requiring the grommet. You have to remove the MP any way so probably be better cutting the stock MP top off and tethering. Seems like popping the glass in and out would eventually tear the silicone too. Really didn’t notice any huge vapor taste or production difference either. I’ve seen a couple that slip over the stock MP that I’d also like to try.
Second, and probably my biggest “oh” moment, is that the @Duba Tempest parchment case fits the Pivot like a glove. For on the go carry this will certainly be my go to. Nice protection and slim fit for the jacket pocket.
quick update on the simple.human.glass mp. Not sure which version I have but no matter how I play with my draw speed the stock cap is 100% superior in terms of flavor and vapor production. I want to try one from someone else but may wait a month or two more to see what all comes out
terpguy420
Well-Known Member
Many thanks. I have a Kovacs piece for my Pockety. Let's see how much damage has been done by my wedding anniversary. It's on my list.Maybe you have not see this one :
Pivot Spinner Mouthpiece
Premium glass spinner mouthpiece to enhance your Pivot experience, with the easy to install design and simple cleaning process. These durable,...www.kovacsglass.com
Just going to chime in as well regarding the glass mouth pieces I have the Kovacs Spinner w/ Gromet and I also purchased the SH v3 spinner second.
I agree with some of the sentiment here and definitely prefer the function of the Kovacs tip, the SH v3 is way more constricted and takes more pull to get the pearl going if using one, the only upside I'd give the SH v3 is that it fits in the official carrying case slot with the tip on the Pivot where I have to take the Kovacs tip off and just store it in the case.
I agree with some of the sentiment here and definitely prefer the function of the Kovacs tip, the SH v3 is way more constricted and takes more pull to get the pearl going if using one, the only upside I'd give the SH v3 is that it fits in the official carrying case slot with the tip on the Pivot where I have to take the Kovacs tip off and just store it in the case.
Last edited:
Here's a visual reference of my dab size when I say 2/3 of a pea
What a great newz! Could you share a pic of that with us?
someTooL
Well-Known Member
That would have beeen helpful lolWhat a great newz! Could you share a pic of that with us?
Damn. I already spent my money buying “custom” $$$ tips.
I got one from this site. Should be ready shortly. Will report back when it arrives. For pivot users on the go…… what do you do with the dirty dabbing tool? Do you just wipe it clean before storing? I’ve been looking online for a dabber with a cover, but unsuccessful. So I hot glued my dabber to a doob tube.
When I used to carry load-as-you-go pens like this many years ago, I would wrap the dab tool in a small piece of parchment paper.
Other times I might just use a toothpick as a tool so it could be easily disposed of.
Eventually I designed a retractable dabber to address this, but I never released it for commercial sales.
Plenty to choose from, from retractable tooth picks,
To hot knives with covers (my preference), shop around, mine cost about 5 bucks each as I had a battery...any battery mod will work,
Oooh, with a lid and a light...I don't need 100 of them though!
To hot knives with covers (my preference), shop around, mine cost about 5 bucks each as I had a battery...any battery mod will work,
Oooh, with a lid and a light...I don't need 100 of them though!
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I'm not sure where these are available now, I had seen them in a couple different online head shops for sale and was tempted then:
However they are not cheap since they are heady full color glass, but the 10 mm connection is a nice idea although not so good out and about anyway probably lol would go with heady pivot glass though!
Easywider
Simple is the way
Tried this one last night but was unsuccessful as it deletes the air intake. Am I missing something?
Zoom in where the top portion of the silicone MP meets the TM stem. You can see that OP cut a slit in glass stem for airflow.
Easywider
Simple is the way
Ah ha! Thank you