Discontinued Pinnacle Pro

Dreamerr

Dreamerr

Always in a state of confusion and silliness♀
Ahhhhhhhhhhhhhhhhhhhhhh, in my mind you pulled the screen. I have a pong that snapped the screen part right off and was using that. Ok let me show.............PP...........hehe what I have done in the past.

SZBv8yj.jpg

655K7uB.jpg

BL3X9UR.jpg
 
arf777

arf777

No longer dogless
A standard 18/14 GonG downsized has made the PnP work with almost everything I've tried, except for LSV wands, which also need an 18/18 female-female adapter. But I almost exclusively use glass.

I also found numerous glass slides that fit over the PonG adapter like they were designed for it, much easier to carry than a big glass mouthpiece.

And the silicone bowls / stems for the HI fit on it too.
 
Dreamerr

Dreamerr

Always in a state of confusion and silliness♀
@arf777 , we are trying to bypass the plastic not use it in the path hence going inside not the outside of the pong or removing it all together. I have been working on this for a long time and have given up till now that it has come back up.

EDIT: Now I see I forgot the direct connect pic lol. All glass cept for the pn itself.
KewPOh4.jpg
 
arf777

arf777

No longer dogless
Dreamerr said:
@arf777 , we are trying to bypass the plastic not use it in the path hence going inside not the outside of the pong or removing it all together. I have been working on this for a long time and have given up till now that it has come back up.

EDIT: Now I see I forgot the direct connect pic lol. All glass cept for the pn itself.
KewPOh4.jpg
Click to expand...
I actually just did that pretty easily- flipped an unused 14mm slide around, put the washer from the end of the Supreme 2 on it for a better seal, and voila. Short path but less glass to carry and possibly break in a pocket (I've broken half a dozen glass solo stems that way).

URwPKw2.jpg

URwPKw2.jpg
 
Dreamerr

Dreamerr

Always in a state of confusion and silliness♀
My issue with connecting to that round piece is it isn't stable. I have had the mp fall off easily not just cause of the weight as I can use smaller stuff. Blazing how did you get it to stay and same question to you arf? It was a bitch and a half to get it on as well. If I can do that then I can just use the solo gong.
 
arf777

arf777

No longer dogless
Dreamerr said:
My issue with connecting to that round piece is it isn't stable. I have had the mp fall off easily not just cause of the weight as I can use smaller stuff. Blazing how did you get it to stay and same question to you arf? It was a bitch and a half to get it on as well. If I can do that then I can just use the solo gong.
Click to expand...
You're right, it isn't stable. Working on that. On the upside, the little mouthpiece I;m using is thick, it was free (with a big glass piece), and I have half a dozen just like it. So I won't cry if it breaks.
 
BLAZING OG

BLAZING OG

Vaping is a way of life!
Dreamerr said:
My issue with connecting to that round piece is it isn't stable. I have had the mp fall off easily not just cause of the weight as I can use smaller stuff. Blazing how did you get it to stay and same question to you arf? It was a bitch and a half to get it on as well. If I can do that then I can just use the solo gong.
Click to expand...
Dreamerr I had a piece large tubing that I slowly heated for a second with a lighter to make it stretch easily, then I used a tool to stretch the end over the outside part of the pinnacle pro chamber.
Kinda like a a shoe horn and pulling the tubbing out towards the little lip.
 
BLAZING OG

BLAZING OG

Vaping is a way of life!
Dreamerr said:
That is what I did........I acutally used 1/4" tubing so it was small and was hoping it would stay but nope it slips off.
Click to expand...
Weird, not sure on the size of this tubing, I had it for years???



This is the glass adapters Iam using , I bought that same set up a few months ago at VENICE BEACH,CA, they had it sitting on the shelf for years and could not sell it, he dusted it off and sold it for 20 bucks to me..
I got one 18mm gong to vape or whatever I can fit it , one 14mm gong to vape , one larger glass mouth piece and a smaller one, plus the h20 vape it self but only tried it once.

@Dreamerr







After you put it on once or twice it seems to go on easy and stay on atleast tighter than the original pong if not about the same.
 
Last edited:
Dreamerr

Dreamerr

Always in a state of confusion and silliness♀
That is what I did but I always have a hard time. I was trying all this time with tools, needle nose pliers ext. Right now I stuffed the silicone in and will add pic when I am done. I also tried a chillum but the screen was to high so will redo that one. I wasted a whole bullet lol cause I spilled it duh. Also the fact that you have to take it on and off if you don't get the piece out from the top sometimes. I tried to get bit ID tubing around the whole damn PN lol to no avail of course.
 
V

vapeoisseur

Member
Just checked out Cera thread- so glad we all have pnp's. So much more user friendly we get time to make mods for it!!!! With the Cera you need a Phd to operate a $500 vape. I'd feellike a sucker if I got one of these
 
Dreamerr

Dreamerr

Always in a state of confusion and silliness♀
Remember I spilled the herb so that this was what was left. I don't know the difference between the high temp 450 degree rated silicon and the creeping pong. I am still going to make it fit the other way.
vtrxUjf.jpg

I used the pong screen at the bottom of the silicone this time. When I used the chillum I had it up at the top and the herb pulled up:doh: hence the mess.
 
Dreamerr

Dreamerr

Always in a state of confusion and silliness♀
Sativape said:
I've been using a glass blunt like this one:

http://breedbay.co.uk/gallery/data/909/DSCN1286.JPG

The inner ID of the top of the Pong opening is 8mm
The outer OD of the inner glass blunt tube is 8mm.

The flange of the inner glass blunt tube fits perfectly inside the screen of he Pong.

This does an awesome job of cooling the vapor down.
Click to expand...

Well now you did it. That is what we are all trying to do so how did you find something that fit so perfect grrrrrrrrrrrrrrrrrrrrrrrrr? Can you show it connected please?

I am not liking any of you for making my obsession re-emerge:goon:.
 
Last edited:
pakalolo

pakalolo

Toolbag v1.1 (candidate)
Staff member
bigwheels said:
I couldn't agree more!

I still smoke blunts daily and this is the only vape that can get the job done for me fairly quickly!

I have been talking to smaller companies all weekend…..disappointing no 1 from vb will address my problem.

Will be calling visa around 5 on tuesday if I don't hear from vb by 3 on tuesday. Im started to get really pissed off vb doesn't value loyal customers who have spent 500 plus with them when they had no reason to think vb was a good company. I am mad because my income is around 6k a year(I work my ass off for it) , and the majority of that is spent on meds, glass, and vapes. I feel like vb is starting to care more about the money than us loyal folks!

It was the fine gents & ladies on fc that convinced me to drop 480 on 2 pinnacles for me and my uncle and 200 on 3 small wt's. Not too mention we dropped 80 as soon as the bullet holders came out and my uncle still wants a simba wt for 300 even though I'm getting bent the fuck over right now.

I value what I hear from the fc members more than anyone else…..Real Talk……I'm able to control my ptsd a lot better now that I vape and dab various concentrates daily per advice of the good people of fc! SO MUCH KNOWLEDGE ON HERE!
Click to expand...

Our rule is:
  • State your complaint and move on.
I understand that you are unsatisfied with VaporBlunt but you have to work it out with them in PMs or email, not in this thread. You've had three shots at it so far. Please don't take a fourth.
 
pakalolo,
Sativape

Sativape

Well-Known Member
Dreamerr said:
Well now you did it. That is what we are all trying to do so how did you find something that fit so perfect grrrrrrrrrrrrrrrrrrrrrrrrr? Can you show it connected please?

I am not liking any of you for making my obsession re-emerge:goon:.
Click to expand...

Here are some clear as mud details that I posted earlier about the glass blunt:

http://fuckcombustion.com/threads/pinnacle-pro.10651/page-101#post-511802

Some assembly pictures will follow.

I've going through the last few pages of this thread, and you guys have covered a lot of useful information.
 
Dreamerr

Dreamerr

Always in a state of confusion and silliness♀
@Sativape , I now remember reading that post but still have the same question. Where did you get it? I don't even know what a blunt whatever is. Old days we didn't have blunts hehe or as my son would say back in the 1800s. Like you said you might have been lucky and just happened to get something that was perfect, but if that is the case we are going to take you out into the town square and stone you:nod:. If I had yours it would be secured I think if it fits as well as you say. I will await pics.
 
CarolKing

CarolKing

Singer of songs and a vapor connoisseur
I hope VaporBlunt checks in with this thread next week. They will be surprised at all your work and innovations. Maybe it will give them some ideas about some positive changes to the Pnp, to make it an even better experience.

A little help for those of us with tender throats.
 
Dreamerr

Dreamerr

Always in a state of confusion and silliness♀
PP, we asked them in the old thread so it isn't happening. This is a forum of men I mean modding, wait that is the same thing:). I guess I caught the bug a little. but love what you all do. We fix our own problems. Also remember that bullet stuff I did was way before that thing that just came out that doesn't work. We shall overcome:clap:.
 
You must log in or register to reply here.
Top Bottom