Discontinued Pinnacle Pro

OMEiAM

OMEiAM

Well-Known Member
Sativape said:
@ vapeoisseur,

I would suggest the following:

Get a small piece of rubber (bike tube repair patch type) or they have this type material readily available t HD, or Lowes, you'd probably get a scrap piece for free.

Use the bottom holder part of the case as a stencil and trace out the spacer(s).

Once you got the spacer(s) made, then I would use a rubber band to wrap around the lid and this would definitely create enough pressure to keep your goodies from falling out.


What an awesome carrying case!


So I'd like to share something:
I whipped out the PNP last night around 11pm and introduced it to 1 Ascent user, 1 Solo user, and 2 non-regular vapors.
I put some of my Moroccan hash / Jamaican cess / Sour D Qwiso salad mix into the bullet of the PNP.
I also brought along 3 extra packed bullets along with me.

One bullet lasted for 3 x 8 minute sessions.

I started the 1st session on 1:
Everyone could not stop talking about the flavor about how tasty it was.
"mmmmm this shit takes so fucking good"

2nd session was on 2,

And 3rd session was on 3 and 4.

No one could believe that how long one bullet lasted.

This thing kept pulling cloud after cloud of dense delicious vapor.

All five of us were fully roasted after 1 fully roasted bullet, but being NYE, I put in another bullet and started another 3 sessions.

Both Ascent and Solo users were sold on the PNP.

The 2 non-regular vapors who were very skeptical of vaping in general, but were now firm believers.

Yoyokid1 is gonna get a bulk order for 4 units within a week.
Click to expand...

Sounds great! Yesterday I ordered a Pinnacle Pro and 6 bullet holder from yoyokid1 on eBay. Friday can't come soon enough!

(For people with a Pinnacle Pro)

I was wondering when you use flower, how much do you put in? Also, does it work better with finely ground material?
 
Last edited:
V

vapeoisseur

Member
@Sativape I'm actually using foil for each bullet at the moment. Loading it up and cover the top of bullet with foil and fold down sides, this then slides neatly into 6pk with no room to shake around and fall out. Will look for some rubber/silicone seal as that will be way easier than hand wrapping every loaded bullet.
 
CarolKing

CarolKing

Singer of songs and a vapor connoisseur
OMEiAM said:
Sounds great! Yesterday I ordered a Pinnacle Pro and 6 bullet holder from yoyokid1 on eBay. Friday can't come soon enough!

(For people with a Pinnacle Pro)

I was wondering when you use flower, how much do you put in? Also, does it work better with finely ground material?
Click to expand...
I like to put my herb in the bullet somewhat packed with cotton on top. It gives me a little tighter of a draw. I start at level 2 and work my way to level 3 using the WT. The vapor is somewhat harsh for me so I usually stay at level 1 when not using the WT.

The bullets usually last for about 3 eight minute sessions.

I grind my herb to a cornmeal type-consistency and I don't weigh it.

I use the pong instead of the mouthpiece when using without the WT.
 
Last edited:
OMEiAM

OMEiAM

Well-Known Member
Pinnacle Pro said:
I like to put my herb in the bullet somewhat packed with cotton on top. It gives me a little tighter of a draw. I start at level 2 and work may 3 using the WT. The vapor is somewhat harsh for me so I usually stay at level 1 when not using the WT.
I grind my herb to a cornmeal type-consistency.

I use the pong instead of the mouthpiece when using without the WT.
Click to expand...

Thanks but how much does your herb weigh out to? Unless I'm the only one that weighs my herb out first, haha.

I'm trying to figure out how much fills a full bullet and how little it can use while still performing well.
 
V

vapeoisseur

Member
@OMEiAM I don't think many people weight their erb. Pnp will work great with anything from .1 - .5. You can pack the bowls fairly tight just use finely ground and don't go crazy! I like to use a dbv swizzle stick to help guide to corners.

Here is a wrapped bullet and bullet holder with 7 packed bullets. I keep one loaded in machine.

sxbpys.jpg
[/IMG]
o8ewjo.jpg
[/IMG]
10culuw.jpg
[/IMG]
eq9ogp.jpg
[/IMG]
 
OMEiAM

OMEiAM

Well-Known Member
vapeoisseur said:
@OMEiAM I don't think many people weight their erb. Pnp will work great with anything from .1 - .5. You can pack the bowls fairly tight just use finely ground and don't go crazy! I like to use a dbv swizzle stick to help guide to corners.

Here is a wrapped bullet and bullet holder with 7 packed bullets. I keep one loaded in machine.

sxbpys.jpg
[/IMG]
o8ewjo.jpg
[/IMG]
10culuw.jpg
[/IMG]
eq9ogp.jpg
[/IMG]
Click to expand...

Thanks for the information! I currently grind really fine for my MFLB and Pax.

I can't see the images though. I'm not sure if it's a problem on my end?
 
D

drhaygood1212

New Member
BLAZING OG said:
Thats awesome,:rockon: does it finish it off in a few fat hits with a tube volume that large ?
sounds like fun.!:party:
I havent tried it on my 19 inch US Tubes 9mm straight tube, might have to give it a go soon.
Click to expand...


NEW HERE WHAT WOULD BE THE BEST VAPE FOR UNDER 70 80 BUCKS I CANT KEEP UP WITH ALL THE DIFFERENT TYPES. ALSO NOT THE SHARPEST TOO; IN THE SHED PLEASE ANY HELP WILL BE APPRECIATED..!!
 
drhaygood1212,
  • Like
Reactions: BLAZING OG
momofthegoons

momofthegoons

vapor accessory addict
drhaygood1212 said:
NEW HERE WHAT WOULD BE THE BEST VAPE FOR UNDER 70 80 BUCKS I CANT KEEP UP WITH ALL THE DIFFERENT TYPES. ALSO NOT THE SHARPEST TOO; IN THE SHED PLEASE ANY HELP WILL BE APPRECIATED..!!
Click to expand...
@drhaygood1212 this post is off topic for this thread. Please start a new thread with your question and specific needs in the "Ask FC" section.
 
M

Mikey37

New Member
So I'm getting my PnP this morning. What should I do before anything else to ensure I get the most out of my experience?
 
S

SiDankies

Well-Known Member
After switching from my pinnacle to my pinnacle pro I find the vapor to be much more harsh on the pnp. I used both exclusively on 2 and the pnp is honestly me coughing a lot. I have the WT and that makes everything smooth but I do like to cape without it also. Hope maybe I'm just sensitive to this strain my dealer gave me. The pnp puts out insane clouds though damn
 
CarolKing

CarolKing

Singer of songs and a vapor connoisseur
I don't use but the first three heat levels of the Pnp. If they made a Pinnacle with 3 heat levels instead of 2 I think that would be the perfect unit, even though I have not tried the Pinnacle.

I don't have access to oils as of yet, so the higher heat levels don't work for me. I can only handle heat level 1 when not using the WT with the Pnp. I've noticed others seem to have a sensitive throat with the unit too.

Nevertheless, VB has created a kick ass product.

Fuckcombustion, vape and enjoy a healthier life!
 
Last edited:
M

mestizo

Well-Known Member
Has any of the new adopters of the PNP bought theirs from theyoyokid over at Ebay?
The reason I ask is, not only is his price the best, but he seems to accept offers from FC members if I'm not mistaken. What's the lower price anybody has paid.

Thanks.
 
mestizo,
hoyo77

hoyo77

Well-Known Member
BLAZING OG said:
Heat soak the bullet for a few seconds and if you want larger clouds, if not sit back and enjoy.:rockon::rockon::rockon:
Click to expand...
OG told me the heat soaking tip when i first got my pro over thxgiving. i like to put a little kief in the bottom of my bullet then put flowers over that. warm the bullet up a little and oooooooooooo weeeeeeee!!!!!

Pinnacle Pro said:
I don't use but the first three heat levels of the Pnp. If they made a Pinnacle with 3 heat levels instead of 2 I think that would be the perfect unit, even though I have not tried the Pinnacle.

I don't have access to oils as of yet, so the higher heat levels don't work for me. I can only handle heat level 1 when not using the WT with the Pnp. I've noticed others seem to have a sensitive throat with the unit too.

Nevertheless, VB has created a kick ass product.

Fuckcombustion, vape and enjoy a healthier life!
Click to expand...
i took mine to 3 once with a water tool attached...i dont go past 2...i would only go to three or higher if i just wanted be zombified.

mod note: Edited to fix broken quote tag.
 
labrador

labrador

New Member
Pinnacle Pro said:
I also have had problems over the last few weeks with no response with emails to VaporBlunt. I'm willing to give them the benefit of the doubt for so long, its been the holiday season. I hope that next week we can get some answers to our emails.
Click to expand...

I've had several instances where it took a lot of badgering to get a response as well, and it was before the holidays. I've had to e-mail multiple times a day for several straight days, increasing the urgency of the subject line and content to get a response. All my issues (defective WT and PPro) were eventually resolved, but it took a lot of time and angst on my part.

It irks me a bit to see VaporBlunt post repeatedly on these forums that they don't know what people are talking about; they respond to all messages promptly; not sure how that one slipped through the cracks, etc. Just admit you are understaffed to handle some of the correspondence and issues which are arising, and commit to hire someone else when you can. These units are too expensive to get the run around.
 
CarolKing

CarolKing

Singer of songs and a vapor connoisseur
VaporBlunt does not have a Customer Service office that has an available phone number that customers can call with questions, that is something they need to work on.

They only have a phone number for wholesale companies. I've tried calling that number and nobody answers.

Customer Service was awesome back in September and October, I'm not sure what's going on with them. Yes, $239 is a lot of money to spend and not to have someone answer your emails.
 
You must log in or register to reply here.
Top Bottom