Hey, I wasn't implying anything, and I have ordered one either way. It was only a question because in one of the vb threads someone said you could buy the seconds cheaper. Think it was original pinnacle thread but could of been solo. Anyway thanks for quick replys guys
Discontinued Pinnacle Pro
- Thread starter stickstones
- Start date
THCfootprint
Active Member
I wanted to ask those of you who bought the WT straight from vaporblunts website, do you get water in your splash guards when you draw.
That's strange: It's not an error code, my first thought would be that the LED burnt out (the LED's are Red-Green-Blue so green and blue can burn out and only leave red working) But that is usually not an intermittent thing. Is it back to working normally?
VAPEHUNTER
Well-Known Member
Yeah, I get a little bit of water in the splash guard but not enough to really bother me or anyone else using it.
Once again guys,
It's imperative we get back the damaged pongs, please do not forget to send it back in once you get your new piece. It's impossible for us to speculate accurately, so until I get the damaged parts back any idea we have is basically just a guess.
It's imperative we get back the damaged pongs, please do not forget to send it back in once you get your new piece. It's impossible for us to speculate accurately, so until I get the damaged parts back any idea we have is basically just a guess.
Have there been reports of regular MPs being damaged from use?
Yes it's since gone back to normal but did it again today shortly after I wrote the initial post.
poonman
Well-Known Member
Hey TVRB ,
RE ; PNWT
I thought I read , you DON"T ship to Toronto , Canada .
Is that correct ?
bussinrounds
Well-Known Member
I ordered the water tool days ago, got a tracking # in an email, registered with UPS site (so I can track it) and all I'm getting is...
UPS could not locate the shipment details for your request.
meduser#420
Fear & Loathing in FuckCombustion
Ok First impression: Small
Took about 2 and a half hours to charge.
I loaded a lightly filled full bullet with what I had ground up(can't remember strain)on my tray. Set to 3 and let it warm up, when it hit 3 I dropped in the load. Before I could hit the HT the herb was vaporizing out of the top. So I started hitting it and flavor is great on the first few pulls, but at the end was tasting like burnt air. I was blasted!!! It was nice vapor and nothing smokesque. I also blew it out at my friend and he still had no idea I was sitting here medicating. So far so good, it has been 2hrs and a meal. I'm still feeling it.
Going to be trying some wax in a few.
edit; I need to work on the wax part... I tried a fleck and was not sure it was enough so I put in a chocolate chip size piece. Took some draws but just wasn't sure still. So I loaded another full bullet with white monkey bawls this time. I am good! I feel like I smoked a bowl but no chest heaviness! btw, The lights are very cool. My remains are a dark tobacco color.
I'm taking a full 10 second pull, It has turned off 3x now from I presume to be over heating? Also the lights started discoing downwards, but I let it sit a min and all is good. Now from just 3 uses and maybe 15 - 20 minutes I am at bar 3 in battery life
Took about 2 and a half hours to charge.
I loaded a lightly filled full bullet with what I had ground up(can't remember strain)on my tray. Set to 3 and let it warm up, when it hit 3 I dropped in the load. Before I could hit the HT the herb was vaporizing out of the top. So I started hitting it and flavor is great on the first few pulls, but at the end was tasting like burnt air. I was blasted!!! It was nice vapor and nothing smokesque. I also blew it out at my friend and he still had no idea I was sitting here medicating. So far so good, it has been 2hrs and a meal. I'm still feeling it.
Going to be trying some wax in a few.
edit; I need to work on the wax part... I tried a fleck and was not sure it was enough so I put in a chocolate chip size piece. Took some draws but just wasn't sure still. So I loaded another full bullet with white monkey bawls this time. I am good! I feel like I smoked a bowl but no chest heaviness! btw, The lights are very cool. My remains are a dark tobacco color.
I'm taking a full 10 second pull, It has turned off 3x now from I presume to be over heating? Also the lights started discoing downwards, but I let it sit a min and all is good. Now from just 3 uses and maybe 15 - 20 minutes I am at bar 3 in battery life
Last edited:
VAPEHUNTER
Well-Known Member
Sale ends Oct. 31ST
grokit
well-worn member
@meduser#420, there's an 8-minute timer and it turns off, does that sound like what was happening?
mollee
Well-Known Member
Ok. Don't laugh at my complete naïveté on using the PN Pro w/oil.
I have some dama oil. I now have the WT and am ready to try this out after using the PN PRO for lots of flower.
Do I insert the metal jacket, heat to level 4, then pop in the oil & vape thru the WT?
Thanks for answering my n00b questions in advance. I'm ready to try this part out!!
I have some dama oil. I now have the WT and am ready to try this out after using the PN PRO for lots of flower.
Do I insert the metal jacket, heat to level 4, then pop in the oil & vape thru the WT?
Thanks for answering my n00b questions in advance. I'm ready to try this part out!!
rsqemt911
Well-Known Member
Ok. Don't laugh at my complete naïveté on using the PN Pro w/oil.
I have some dama oil. I now have the WT and am ready to try this out after using the PN PRO for lots of flower.
Do I insert the metal jacket, heat to level 4, then pop in the oil & vape thru the WT?
Thanks for answering my n00b questions in advance. I'm ready to try this part out!!
Yes. That is exactly how to do it. But do oils on 5. That's what that setting is for.
stickstones
Vapor concierge
It works wonderfully. I've used both cotton and hemp fiber (I prefer the hemp) as filters in other vapes and then I vape that filter in something else...usually a portable. The PNPro is my favorite for doing this.
BTW, I would never sell seconds advertised as firsts, neither would yoyokid. I think our company reputation speaks for itself
I'm pretty sure we do
I'm pretty sure we do
You ask, I deliver
berbano
Member
deadheadbill
I can see clearly now the smoke is gone...
Dude...very fucking nice!!!
rsqemt911
Well-Known Member
You ask, I deliver
Very nice! How much would that go for?
Idk yet, prob > $175 but < $250. It's being designed for the baker. It's a frit disk, kind of hard to tell from the pic
berbano
Member
That's a fair price. Compatible with the pro right out of the box?