Deadshort480
We're here to fuck shit up.
If that Simba fritter is three hundred bucks then I'm going to have to pass. That's a lot of cash for another piece of glass.
Discontinued Pinnacle Pro
- Thread starter stickstones
- Start date
BLAZING OG
Vaping is a way of life!
Seems Therealvaporblunt has not logged in for a few days, maybe tomorrow we will hear about the BF codes.There probably way busy with holidays, family, and the baker.
berbano
Member
I have to agree. I would have been willing for $200 but $300 is a bit too much. Still going to wait and see what TRVB has to say about their Black Friday deal.
labrador
New Member
Given the QC issues with the current hydrotube and PN Pro (had to exchange both), I'm not willing to shell out that much. I'd rather put it toward other glass with an established reputation.
Last edited:
Hey guy, sorry I'm late. I was waiting until today because I was hoping I could get some of our vendors to change their minds.....
Anyhow, I'm not able to put pn or pn pro units on sale due to an uproar of people who resell our products, so we are going to discount the pn and pro dlx (vape and WT) instead to get around everyone's complaints. Sorry if this is an inconvenience.
Here is the sale prices.
vb 2.0 dlx any package- $250.00
pinnacle dlx package- $200.00
pinnacle pro dlx package- $240.00
Palm 1- $70.00
palm 2.0 $70.0
original vaporblunt $69.99
VB 2.0 and pN water tool any style- $70.00
simba frit water tool for 18mm on sale for $220.00 originally $299.00
all accessories on site will be 35% off.
I will post the offer codes tomorrow. Once posted they will work immediately. Happy holidays
Anyhow, I'm not able to put pn or pn pro units on sale due to an uproar of people who resell our products, so we are going to discount the pn and pro dlx (vape and WT) instead to get around everyone's complaints. Sorry if this is an inconvenience.
Here is the sale prices.
vb 2.0 dlx any package- $250.00
pinnacle dlx package- $200.00
pinnacle pro dlx package- $240.00
Palm 1- $70.00
palm 2.0 $70.0
original vaporblunt $69.99
VB 2.0 and pN water tool any style- $70.00
simba frit water tool for 18mm on sale for $220.00 originally $299.00
all accessories on site will be 35% off.
I will post the offer codes tomorrow. Once posted they will work immediately. Happy holidays
CarolKing
Singer of songs and a vapor connoisseur
I bought a pnp from EZ Vapes (wanted a back up unit) and got an exchange because the the original Pro that I bought stopped working. I've only had this one a week or so. I just noticed what looks like a crack that is perfectly straight going down on the very top where the mp slides on (on sleeve)I'm tired of having to send a unit back, having to wait, pay shipping etc... It looks like it could be glued very easy. What glue would be safe for the PnP? Does anyone know?
I would really appreciate any ideas.
I'm waiting to get my other Pnp back VB is putting a new sleeve on the top, very first pro that I bought from them. When I was taking off the mp, I broke part of the top of the unit. They are putting a new sleeve on the top. I am paying $50 to have it fixed. I seem to be having some bad luck here, it makes me nervous
I would really appreciate any ideas.
I'm waiting to get my other Pnp back VB is putting a new sleeve on the top, very first pro that I bought from them. When I was taking off the mp, I broke part of the top of the unit. They are putting a new sleeve on the top. I am paying $50 to have it fixed. I seem to be having some bad luck here, it makes me nervous
Last edited:
BlueCloud
Well-Known Member
Luv2Vape
Well-Known Member
This is dissapointing news. I have the exact same issue. I resisted the urge to glue it & am waiting to hear back from vaporblunt after sending photos late last week. I pretty much treat my pnp with kid gloves & havent dropped it or understand why it would crack. A recommendation for proper glue seems to be in order as the crack is confined to the outer sleeve.
Last edited:
overvaped
Vapor evangelist
Hi everyone,
I have a question for PNP owners.
How is the MP after some use? Does it look like new, or something near that?
With the original PN, it looked quite awful after not too much use...my only complaint about that product. I'd really like to buy a PNP if that issue is solved. And with this terrific offer, I'd go for a deluxe and get my first!!! water attachment
@TherealVaporblunt ...
I have a question for PNP owners.
How is the MP after some use? Does it look like new, or something near that?
With the original PN, it looked quite awful after not too much use...my only complaint about that product. I'd really like to buy a PNP if that issue is solved. And with this terrific offer, I'd go for a deluxe and get my first!!! water attachment
@TherealVaporblunt ...
Belgianvapor
Well-Known Member
Hi everyone,
I have a question for PNP owners.
How is the MP after some use? Does it look like new, or something near that?
With the original PN, it looked quite awful after not too much use...my only complaint about that product. I'd really like to buy a PNP if that issue is solved. And with this terrific offer, I'd go for a deluxe and get my first!!! water attachment
@TherealVaporblunt ...
with the pnp the MP is black so it can stain like crazy and still looks good...smell will probably be
a little bit less good.
CarolKing
Singer of songs and a vapor connoisseur
The crack I have is where the mouthpiece attaches to the pnp going down maybe one third of an inch diagonally (facing front) It's not cracked around the outer area where the body of the unit is like LuvtoVape.
I don't know how to take pictures and send them in with our comments or I would send in a picture.
When it's warm and after the pong has been attached it opens a bit and its very obvious.
Since the crack is by where the mouth piece is I wouldn't want to breathe in chemical vapors from the glue.
I know there must be some kind of glue that's heat resistant and isn't poisonous or bad for a person. I won't do anything hasty I may decide to send it back.
It's really frustrating I really like the Pnp. I like the portability, how it operates and performs. When your session is over the ABV is dark and evenly browned. Best of all how it medicates! I just wish it held up better or anyway for me. Most people though have had good quality units, I've noticed on FC.
I don't know how to take pictures and send them in with our comments or I would send in a picture.
When it's warm and after the pong has been attached it opens a bit and its very obvious.
Since the crack is by where the mouth piece is I wouldn't want to breathe in chemical vapors from the glue.
I know there must be some kind of glue that's heat resistant and isn't poisonous or bad for a person. I won't do anything hasty I may decide to send it back.
It's really frustrating I really like the Pnp. I like the portability, how it operates and performs. When your session is over the ABV is dark and evenly browned. Best of all how it medicates! I just wish it held up better or anyway for me. Most people though have had good quality units, I've noticed on FC.
Last edited:
I haven't heard of crack units, but we will obviously take it back, just contact customer service and they will take care off you
I,ve been emailing customer services for 2 weeks with the same problem. also pm,d u ages ago awsell.
llamaman001
Well-Known Member
damn that sucks man, look like that thing needs a good cleaning!
llamaman001
Well-Known Member
oh nice 70 bucks on any of the water tools except the Simba? Might have to pick up that double showerhead and the chandelier one as well!!! Perfect timing vapor blunt 
berbano
Member
oh nice 70 bucks on any of the water tools except the Simba? Might have to pick up that double showerhead and the chandelier one as well!!! Perfect timing vapor blunt
Would they work for the PNP or is it a different size at the joint?
Kaptan
Well-Known Member
Those both have a 18mm joint to fit the VB 2.0 so they would not fit without an adapter.
So is it worth the upgrade how is smoking bud on the higher settings or is it not worth vaping above 390 because you get benzene and a weak cloud or do you get a worth while type of cloud making me want to upgrade ??? The original pin sometimes i get the knock out cloud hit and others times it seems like its broke. I would recommend the original if you have headies lower quality buds dont seem to give you good knock out clouds and is a waste.
im debating if i wanna buy a bag of weed or upgrade and get the pro is it worth it???
so lets say your out of bud and all you have left is vapor poo aka avb and you dont have a vape that goes above 390. Would the Pro be worth buying just to vape your abv at a higher temp or is it not worth it. Has anyone done this test and do you get a few knock out clouds out of already vaped bud
Has anyone tried making BHO out of vapor poo and how does it work with the pro
also how does the thing feel in your hand the original slightly burns your hand so how does this thing feel at the highest setting.
also can you change the battery i have no idea why anyone would make these things without a way to easily change the battery
one more thing is there gonna be any newer version of the pinnacle for next year
water vaping is the only way are there anyother products out there for water bong vaping its a lil disappointing that vapor brother is the only company giving us water vapes thanks guys
Hey does the Simba work with the pinnacle and is it way better then the water tube with the pinnacle is ok but i have to fill it to the rim and theres something missing not enough water but you still get a great knock out rip from it
im debating if i wanna buy a bag of weed or upgrade and get the pro is it worth it???
so lets say your out of bud and all you have left is vapor poo aka avb and you dont have a vape that goes above 390. Would the Pro be worth buying just to vape your abv at a higher temp or is it not worth it. Has anyone done this test and do you get a few knock out clouds out of already vaped bud
Has anyone tried making BHO out of vapor poo and how does it work with the pro
also how does the thing feel in your hand the original slightly burns your hand so how does this thing feel at the highest setting.
also can you change the battery i have no idea why anyone would make these things without a way to easily change the battery
one more thing is there gonna be any newer version of the pinnacle for next year
water vaping is the only way are there anyother products out there for water bong vaping its a lil disappointing that vapor brother is the only company giving us water vapes thanks guys
Hey does the Simba work with the pinnacle and is it way better then the water tube with the pinnacle is ok but i have to fill it to the rim and theres something missing not enough water but you still get a great knock out rip from it
Last edited by a moderator:
Deadshort480
We're here to fuck shit up.
I just have to let you know that I can not fully understand your post. Please use some punctuation because it is very difficult to read.
I think you are saying that Vapor Bros is the only company offering vaporizers to use through water? There are many vaporizers made for use through water.
The Simba has an 18mm joint, I believe.
Are the full size tubes really $70 each? Even the Chandelier?
llamaman001
Well-Known Member
it says "ALL VAPOR WATER TOOLS"
SSVUN~YAH
You Must Unlearn, What You Have Learned...
The way I read it, no. It's 35% off accessories not water tool attachment. I believe llama has mistaken that these water tools are 35% off as well making the double showerhead like he wanted $70 off. I hope I'm wrong though, as that deal sounds great!
Edit: @llamaman001 sorry I missed that under the tube, now I think it's on Yayaa!