Discontinued Pinnacle Pro

[CarolKing]

Are some PnPros 8 min. sessions and some 10min.?

 

[Adobewan]

Can somone answer my question please. Is it too harsh to hit at around 390 degrees without the water tube?

Sorry guys, I don't know how to measure the temperature on it but I haven't found it to be harsh at the 2 setting, but if you keep this puppy going, and you will, it will get a bit hot at the tip, but not before performing it's function with gusto!
Only thing I'm looking for is a good Bullet loading system. With the Cloud ELBs, I was a bit bummed having to scoop-fill the ELB until an FC Jedi showed how he seated his Cloud ELB into the male end of a glass bowl(a perfect fit) and used it to suck the ELB full, like a Solo stem.
Like this.

Putting the call out to clever FC members to please share your best PnP bullet loading techniques.
Saw rzaraze's foil idea, so please share any other good bullet capping ideas as well?
TIA!

 

[MileHighLife]

Are plastic and iso usually incompatible?

Iso never seemed to hurt the plastic parts of the pax as I recall...

Some plastics are ok but iso ruins a lot of plastics

 

[Adobewan]

Are plastic and iso usually incompatible?

Iso never seemed to hurt the plastic parts of the pax as I recall...

@grokit if I'm not mistaken, ISO melted the heat selector switch in the Pax.

And if I didn't mention it, I am getting voluminous clouds and throughly enjoying the Pro on setting 1.

"Currently on the lookout for the fastest bullet handler in the webs!"

 

[BLAZING OG]

I cant take credit for this but , I think @Dreamerr , she uses something like this , Iam trying to find the post were she links them!!


http://www.google.com/search?q=sili...HNiwLqpoDQBA&ved=0CAcQ_AUoAQ&biw=1280&bih=664

or
http://www.ecig-vapo.com/silicone-cap-for-ego-t-cartridge-p-8.html

 

[al bundy]

I actually got lucky and happened to fo in a store and buy the last one. I deliver pizza and I put a little in each bullet (I have 6) and then I wrap foil over tge top and put them in a little container.

You should look into the No2 screens ,they fit in the bullet and you dont have to remove them to use them.Just load and go.
They also help keep the MP screen very clean.
I will try and post a pic with the bullet/No2 screen

 

[Dreamerr]

I cant take credit for this but , I think @Dreamerr , she uses something like this , Iam trying to find the post were she links them!!


http://www.google.com/search?q=silicone cartridge cap ecig&client=safari&rls=en&source=lnms&tbm=isch&sa=X&ei=uXiBUry4GcHNiwLqpoDQBA&ved=0CAcQ_AUoAQ&biw=1280&bih=664

or
http://www.ecig-vapo.com/silicone-cap-for-ego-t-cartridge-p-8.html

Ah not those but what is the question as I don't feel like reading to find it. The tips I use are from http://www.vaporkings.com/SearchResults.asp?Search=ecig+condoms if that was what you are getting at. If it was about something else I put a post in the PN thread last night for bullet changing so check it out. I hope I covered it.

 

[BLAZING OG]

http://fuckcombustion.com/threads/the-pinnacle-by-vaporblunt.8431/page-103#post-487653

Heres the post with the info!!!!
In the
Pinnacle

Thread

Ah not those but what is the question as I don't feel like reading to find it. The tips I use are from http://www.vaporkings.com/SearchResults.asp?Search=ecig condoms if that was what you are getting at. If it was about something else I put a post in the PN thread last night for bullet changing so check it out. I hope I covered it.

Oh thanks dreamerr, just posting your caps to cap the Pinnacle or pinnacle pro bullets!!
I assume there the same bullets!!!

yes you hit the nail on the head, thank you.

EDIT @Dreamerr , what about the little white caps you use in the picture, or did you cut the mouthpieces down???

http://www.amazonsupply.com/versilic-dx263010-50-silicone-european-diameter/dp/B002TG3W3U


Not sure if these will work!?

 

[Deadshort480]

I'm hoping my PNP from Massdrop is in the mail tomorrow. It's gotta be this week sometime.

I'm excited to compare the PNP and the Pax.

 

[josemembreno]

Since this question gets asked a lot, I will answer what you need from any charger rather than answer 10,000 similar questions

As long as your charger has an output of 5V and at least 3A of current, you will be fine.

Thanks @Engineering but 1 more question. What specs do I need in order to charge and use the pnp at the same time while charging?

 

[Dreamerr]

http://fuckcombustion.com/threads/the-pinnacle-by-vaporblunt.8431/page-103#post-487653

Heres the post with the info!!!!
In the
Pinnacle

Thread


Oh thanks dreamerr, just posting your caps to cap the Pinnacle or pinnacle pro bullets!!
I assume there the same bullets!!!

yes you hit the nail on the head, thank you.

EDIT @Dreamerr , what about the little white caps you use in the picture, or did you cut the mouthpieces down???

http://www.amazonsupply.com/versilic-dx263010-50-silicone-european-diameter/dp/B002TG3W3U


Not sure if these will work!?

The caps are linked, if it works, and I wrote the name to put into the amazon search. They are bigger and come in a 50 pack and were cut down by toros23 for me and fit perfect. The caps you pictured look to big but that doesn't' mean they are. Sorry I am very off today.

 

[labrador]

I have a pinnacle hydrotube question and hope it is ok to ask here. I bought the tube for $50 during the recent sale from their ebay seller. It seems that the water does not all drain from the top chamber into the water chamber, almost like the holes are too small at the bottom. I was at my buddies earlier today and his didnt have any water on top (it splashes your face a lot). Has anyone else had this issue or know of a fix? I have tried cleaning it with alcohol and using distilled water but no luck.

I like my PnPro very much, but the hydro tubes definitely have some serious quality control issues. My first one had a slow leak (posted about this previously with video) and had to be replaced. The replacement was an appreciably different spec in total unit length and size of the top chamber, which I thought was odd. The new one doesn't leak, but definitely has the issue of water in the top chamber as you describe. It's clean water, so I live with the small splash back. It's good that VB lowered the price of this accessory, as I definitely feel like it wasn't worth the $129.99 I paid before the price drop.

 

[cawshook]

you guys know if the f-bomb is better?

 

[BLAZING OG]

you guys know if the f-bomb is better?

Theres some good info here!!!
http://fuckcombustion.com/threads/vaporblunt-14-4-mm-micro-shower-pnwt-vs-planetvape-f-bomb.11056/
on the F-bomb vs the pinnacle water tool by some folks that own either one or both.

 

[wm762]

its a thick walled one. i bought my unit used from @VaPeD&CoNfUsEd and he gave me extra pongs and i compared the thickness of them all 2 were old OG pinnacle pongs and i gifted them to a friend who needed them. the other two were thick walled ones and one of those two were the one i used and is messed up. i still have one more thick walled one but have decided not to use it for anything other than herbs

So, we you can't use wax for vape? What about budder?

 

[Dreamerr]

@mmenzie and others, here is the link from the old thread about something called creep. This is pics of my mouth piece for them to determine what was going on with the thinner pongs. My guess is and it is a guess with the high heat in the fmj maybe even with the extra thickness it is still doing the creep. There was an older post by engineer with I believe a link to explain creep but I think you can google it as well. The Pinnacle by Vaporblunt

 

[Kaptan]

Putting the call out to clever FC members to please share your best PnP bullet loading techniques.
Saw rzaraze's foil idea, so please share any other good bullet capping ideas as well?
TIA!

I have found using the clear sanitary silicone tip from the Inhalater attached to the screen part of the bullet is a quick and easy way to load the bullets. Just suck and tamp lightly.

 

[RUDE BOY]

Kaptan I know this works well but I know Dreamerr and others Broke the welds on the bullets loading them this way, so be careful.

 

[Kaptan]

Kaptan I know this works well but I know Dreamerr and others Broke the welds on the bullets loading them this way, so be careful.

Thanks for the heads up, but I have been doing this with the same bullet since early September and its showing no signs of failure yet.

 

[Deadshort480]

Can anyone tell me what shipping service MassDrop uses? I still haven't received my PNP and USPS just dropped off for today. Grrrrr.

 

[MileHighLife]

UPS ... just got mine

Edit: they updated my order with tracking info on the website a couple days ago

 

[Deadshort480]

Cool. UPS won't be here for a few more hours.

 

[Adobewan]

Thanks @BLAZING OG and @Dreamerr for answering my humble call, those are Omicron mouthpieces(I've got a million of them, thanks G!) and they work great!

I have found using the clear sanitary silicone tip from the Inhalater....

Thanks to you as well @Kaptan!

Kaptan I know this works well but I know Dreamerr and others Broke the welds on the bullets loading them this way, so be careful.

@RUDE BOY Would this set up be an issue?

EDIT: Disregard my last question, I saw Kap's follow up, thanks!

 

[sasNW]

Got mine a few hours ago, wow this thing is smaller ten I thought like everyone said. I also fully charged it up using the anker battery and it says I still have 75% battery left on the anker. Very happy

 

[al bundy]

Can anyone tell me what shipping service MassDrop uses? I still haven't received my PNP and USPS just dropped off for today. Grrrrr.

They use UPS
Login to massdrop,under your profile choose "transactions" and your tracking info will be there.
I get mine tomorrow.

I use the scoop and tap method when filling a bullet
Or I scoop then blow the weed in (Cold bullet )
Or even just use the straw method,again,Cold bullet