Should not be an issue, I think most inverters will supply the ~12W that the Pro requires
Discontinued Pinnacle Pro
- Thread starter stickstones
- Start date
Should not be an issue, I think most inverters will supply the ~12W that the Pro requires
mannnn i was suppose to get it today but it seems like i wont. most likely monday.... if my package was shipped monday i would of had it today but it was shipped tuesday. just so eager and excited to try this vape.
OMG how come your arrives Saturday?? ups ground not suppose to deliver Saturday unless you payed extra?
OMG how come your arrives Saturday?? ups ground not suppose to deliver Saturday unless you payed extra?
Last edited by a moderator:
Reveen
Well-Known Member
I know that feeling. I had mine for two days and had to send it back! Replacement is on its way but mine is scheduled to arrive Saturday, luckily.
I paid extra and it was still shipped ground, with no explanation or return emails...
Belgianvapor
Well-Known Member
I just used it on 3 with maybe less than 0.04 loaded, it gave me visible clouds the whole session.
Battery has 3 bars remaining after 2 full sessions on 2, one 5-6 min initial empty burn on 1 and 1 full session on 3, so if this is the way I'm going to use it mostly, I will have more run time than the og pn.
Battery has 3 bars remaining after 2 full sessions on 2, one 5-6 min initial empty burn on 1 and 1 full session on 3, so if this is the way I'm going to use it mostly, I will have more run time than the og pn.
Reveen
Well-Known Member
I had to buy mine from the Ebay seller since Vapor Blunt doesn't ship to my state. Ebay seller ships with 2-day USPS Priority.
vape4health
Well-Known Member
Just checking the ebay seller and I don't see replacement mp or pong for the Pro. I would assume the bullets are the same right. I don't need the stuff but would like to keep an unused set for backup. Anyone else sell VB stuff that I can be sure is for the Pro, in Pa so direct from TRVB is out.
I guess the calibration thing does make an external battery pack the only solution. That reminds me, I do remember talk of someone trying to flash a different vape, not sure how it went, could be interesting with the engineer on board. A setable temp range don't sound that crazy after checking out how a eVic ecig can interface with a pc
If we are dreaming of next vape stuff can I put in a vote for a WT that is more suited to a sitting back posting. Maybe even as simple as leaving a few slits out on one side.
I guess the calibration thing does make an external battery pack the only solution. That reminds me, I do remember talk of someone trying to flash a different vape, not sure how it went, could be interesting with the engineer on board. A setable temp range don't sound that crazy after checking out how a eVic ecig can interface with a pc
If we are dreaming of next vape stuff can I put in a vote for a WT that is more suited to a sitting back posting. Maybe even as simple as leaving a few slits out on one side.
So its ok to use a common modified sine wave inverter? Like the 20$ I00watt ones at big stores. It sounds like a silly question but the ha2.1 will fry with one.
Last edited:
Yeah
labrador
New Member
I just received my Pro and water attachment via UPS. It is charging up as I write this. This being my first Pinnacle I had two quick questions before firing this up:
- The mouthpiece feels quite loose with a fair amount of play when attached and seems very easy to pop off (particularly with the water attachment). I know from searching the old Pinnacle forum that this was somewhat common with the original Pinnacle. Are others seeing the same thing with their Pros?
- Any recommendations on your favorite temp to use with the water attachment? I am going to start with 3 and see how it goes.
This thing should be charge by the time I put the kids down this evening...
- The mouthpiece feels quite loose with a fair amount of play when attached and seems very easy to pop off (particularly with the water attachment). I know from searching the old Pinnacle forum that this was somewhat common with the original Pinnacle. Are others seeing the same thing with their Pros?
- Any recommendations on your favorite temp to use with the water attachment? I am going to start with 3 and see how it goes.
This thing should be charge by the time I put the kids down this evening...
Last edited:
labrador
New Member
I bought direct from VB. I originally ordered last Thu (9/5), and I think there was some confusion with the order (possibly from me changing some of the accessories ordered). it didn't actually ship until this Wed, but they sent it UPS 2 day and I got it for the weekend, so it's all good. I am in New England.
The only other vape I own is the MFLB, so looking forward to this.
god damn, i ordered it saturday night and they shipped it tuesday. i wished that they shipped it 2 day ups ;(. its crazy you live much more further then me and you get it so much quicker.
empty mailbox make me cry, been using a shitty 8inch bubbler as a WT for my solo for so long as a replacement. now im just so eager to try the pro with the WT or the solo with the WT.
Scheduled For Early Delivery On:
Monday, 09/16/2013, By End of Day
Originally Scheduled For Delivery On:
Thursday, 09/19/2013, By End of Day
Last Location:
Departed - Cerritos, CA, United States, Wednesday, 09/11/2013
thats how much ups sucks. they make it like their doing you a big favor from looking at the schedule.
Cerritos, CA, United States 09/11/2013 3:55 A.M. Departure Scan
09/11/2013 12:16 A.M. Arrival Scan
Sylmar, CA, United States 09/10/2013 11:16 P.M. Departure Scan
09/10/2013 8:09 P.M. Origin Scan
09/10/2013 1:47 P.M. Pickup Scan
United States 09/13/2013 8:03 A.M. Order Processed: Ready for UPS
seriously wtf man "order processed" after its been shipped 3 days later.
empty mailbox make me cry, been using a shitty 8inch bubbler as a WT for my solo for so long as a replacement. now im just so eager to try the pro with the WT or the solo with the WT.
Scheduled For Early Delivery On:
Monday, 09/16/2013, By End of Day
Originally Scheduled For Delivery On:
Thursday, 09/19/2013, By End of Day
Last Location:
Departed - Cerritos, CA, United States, Wednesday, 09/11/2013
thats how much ups sucks. they make it like their doing you a big favor from looking at the schedule.
Cerritos, CA, United States 09/11/2013 3:55 A.M. Departure Scan
09/11/2013 12:16 A.M. Arrival Scan
Sylmar, CA, United States 09/10/2013 11:16 P.M. Departure Scan
09/10/2013 8:09 P.M. Origin Scan
09/10/2013 1:47 P.M. Pickup Scan
United States 09/13/2013 8:03 A.M. Order Processed: Ready for UPS
seriously wtf man "order processed" after its been shipped 3 days later.
Last edited by a moderator:
grokit
well-worn member
The pong is reportedly improved from the original pinnacle, but I see your point. They could have improved the way it attaches a bit more, but then maybe mine would have broken when it fell to the floor instead of just popping off no harm no foul.
Reveen
Well-Known Member
The PONG on my first Pro (the one I sent back) was pretty tight with little to no wiggle. Hopefully my next one is just as secure.
labrador
New Member
One more really dumb question about filling the water tool. When I filled it up, the diffuser slits are not entirely covered with water (only about half way), but when I add more water in the top it just drips out the bottom. Am I filling it wrong, or has it just been a long week? Imagine how bad I'll be after medicating? Have mercy I'm on infant sleep deprivation.
Last edited:
theCerberus
Well-Known Member
Everyone has their own preference on temperature.
But I really dont see how you can use setting 2 and get "vapor galore" when its just so thin.
Any other of my vapes would give a much denser cloud at this temperature.
I am very frustrated with setting 2, it should be hot enough but just isnt delivering the clouds I seek.
the whole session? even the start? how long did u let the bullet heat soak for to get such good results?
why did you do an initial burn on 1? what would that accomplish considering vaporblunt does the burn off already?
also burn off should be done at the highest temperature because that would get rid of the most stuff.
What if I used it till it dies, then I dont have access to power for a while?
It concerns me that it's a battery powered device, and it is entirely possible the battery will go entirely dead, then what?
A user charges it back up and melts the device down?
I dont get how that works.
Last edited:
Reveen
Well-Known Member
This happened to me with my original pinnacle. It turned out that my tube was defective and one of the welds on the perk had a hole going through it. Trvb warrantied it out for me because it was obviously not a flaw brought on by myself. Even allowed me to warranty it out at my local vapor blunt e-juice bar! Get with trvb, dudes a badass! He'll help you out.One more really dumb question about filling the water tool. When I filled it up, the diffuser slits are not entirely covered with water (only about half way), but when I add more water in the top it just drips out the bottom. Am I filling it wrong, or has it just been a long week? Imagine how bad I'll be after medicating? Have mercy I'm on infant sleep deprivation.
MoneyVapeTheWorldGoRound
OG Vape God
I know this has been stated in this forum before, but I cannot seem to find the 20% off fc code to purchase the pro. Could someone please help!!!!!!
t-dub
Vapor Sloth
FCPRO420 . . .
