Discontinued Pinnacle Pro

[Sativape]

@ TherealVaporblunt and BLAZING OG,

After all of BLAZING OG's Baker and PNP wet hits.... and also this particular bubbler that TRVB posted on the OG thread:

The Pinnacle by Vaporblunt

.... I'm gonna finally invest in a small bubbler piece.

I've been contemplating the PNWT, but I'd much prefer the PNP being above the water since there is less risk of any water getting into the PNP.

I really like the ZOB mini bubbler that TRVB is using...

Any recommendations for a mini bubbler?

I've been reading a lot about people using ash catchers as bubblers... any feedback?

 

[ellute]

Hi i have this charger and yes it charges the pnp but you cant turn it on while in use

Id try a car to usb port and buy a 3.5mm usb charger and try that perhaps it would allow for the pnp to charge and turn on

Thank you
How long does it take to load completely?

I have seen something that I believe that it can work since it meets the requirements... up to 4, 2A

http://www.ebay.com/itm/4A-20W-DUAL...WO-TABS-PADS-TABLETS-FASTEST-2A-/370842517717


and an adapter cable to a connector of... 3, 5 mm?

http://www.amazon.com/gp/product/B00512Z86I/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1

EDIT:
I just read that it only gives 2A for each port

 

[Sativape]

Thank you
How long does it take to load completely?

I have seen something that I believe that it can work since it meets the requirements... up to 4, 2A

http://www.ebay.com/itm/4A-20W-DUAL...WO-TABS-PADS-TABLETS-FASTEST-2A-/370842517717


and an adapter cable to a connector of... 3, 5 mm?

http://www.amazon.com/gp/product/B00512Z86I/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1

@ ellute,

The safest bet for using while charging in the car would be using the AC adapter that comes with the PNP along with an 12VDC to 120AC inverter.

I own a 200W 12VDC to 120AC inverter and it works fine.

I use it in my car all the time.

The USB to 3.5mm adapter cable that you posted will come in handy if you invest in an Anker Astro 3E portable charger that will allow you to charge your PNP while on the go.

I do not own the Anker Astro 3E but you other users have verified that it does charge the unit, but does not allow for plug in usage.

 

[stickstones]

Any recommendations for a mini bubbler?

This little guy has been taking the 'cheap bubbler' thread by storm and I like mine:

http://www.dhgate.com/store/product/d020-bubbler-hand-blown-glass-vase-perc-water/175832535.html

It will require a 18 to 14 reducer for the PNP

 

[Sativape]

This little guy has been taking the 'cheap bubbler' thread by storm and I like mine:

http://www.dhgate.com/store/product/d020-bubbler-hand-blown-glass-vase-perc-water/175832535.html

It will require a 18 to 14 reducer for the PNP

@ stickstones,

Thank you!

This is perfect.

Thanks also for heads up on the 14/18 adapter!

I guess this means that if there is enough clearance to allow for it, I could hook up the baker to it too because of the 18mm connection.

 

[stickstones]

@ stickstones,

Thank you!

This is perfect.

Thanks also for heads up on the 14/18 adapter!

I guess this means that if there is enough clearance to allow for it, I could hook up the baker to it too because of the 18mm connection.

I have done exactly that with this very bubbler. Check the 'cheap bubbler' thread If you want, as there were multiple sources for it, some from China with longer waits and cheaper prices.

 

[Sativape]

I have done exactly that with this very bubbler. Check the 'cheap bubbler' thread If you want, as there were multiple sources for it, some from China with longer waits and cheaper prices.

@ stickstones,

Thanks again for the information.

I found the thread and I'm combing through it now.

So much information.

But... I really like the simplicity and design of the D020.

Can't go wrong with this little guy!

 

[VapeWeeed]

My vape has the red lights going up now. I'm guessing this is a bad unit?

 

[Onamic99]

Mine does that ever third or fourth time its turned on. Maybe its time to send it in.

 

[VapeWeeed]

Mine does that ever third or fourth time its turned on. Maybe its time to send it in.

Happening to yours too? When did you buy it and from who?

 

[Onamic99]

I got mine on ebay about a month ago. I have been waiting on a reply to my PM from VB to see if its an issue or not but mine also seems to take 3-4 min to heat up to level 1.

 

[VapeWeeed]

I got mine on ebay about a month ago. I have been waiting on a reply to my PM from VB to see if its an issue or not but mine also seems to take 3-4 min to heat up to level 1.

I got mine on eBay from theyoyokid1

 

[CarolKing]

Since VB has someone answering the phones now, maybe you could call them if you're not getting any responses to your emails.
It's sounds like its time for a new unit. I know it's very frustrating, it's good to have a back up vape, so you don't go back to combusting.

I'm hoping for a short turnaround time for you. Let us know how everything works out.

 

[Onamic99]

Yep. Planning on sending it in once my Ascent is returned.

 

[BLAZING OG]

@ TherealVaporblunt and BLAZING OG,

After all of BLAZING OG's Baker and PNP wet hits.... and also this particular bubbler that TRVB posted on the OG thread:

The Pinnacle by Vaporblunt

.... I'm gonna finally invest in a small bubbler piece.

I've been contemplating the PNWT, but I'd much prefer the PNP being above the water since there is less risk of any water getting into the PNP.

I really like the ZOB mini bubbler that TRVB is using...

Any recommendations for a mini bubbler?

I've been reading a lot about people using ash catchers as bubblers... any feedback?

Sticks beat me to it , I agree, bad ass bubbler for the price.

That D020 is a great buy!!!
these arent as inexpensive but potentially good buys
http://www.badassglass.com/pocket-recycler-dab-rig.html
These of course are DI joints so it would need a n adapter.
Recyclers are cool but hard to find them for cheap and with a regular female joint !!!

not a bubbler but around 12" in length
http://www.brotherswithglass.com/American_Glass_Water_Pipes_s/412.htm
amazing price for the quality of glass.

I still think @stickstones is dead on with the value you get from the d020, I might pick one up myself!!!!
Medium to smaller pieces seem to work great with the PNP.

This little guy has been taking the 'cheap bubbler' thread by storm and I like mine:

http://www.dhgate.com/store/product/d020-bubbler-hand-blown-glass-vase-perc-water/175832535.html



It will require a 18 to 14 reducer for the PNP

Yup, great bubbler!!!!
Good info!!!!
You beat me to it !!!
Been crazy busy, sorry guys!!!!

 

[exit]

Hey to any 2.0 DLX Hydratube owners out there, how do you clean inside the perc? tried shaking around with salt and iso a bunch but having a hard time cleaning it all out. thanks guys!

 

[BLAZING OG]

I have the Wt that's paired with the Pinnacle Pro same thing as the DLX. I use salt and iso and its been working for me. Try this a couple if times. Maybe rinse with some very hot water. I hope this works for you.

http://www.zepcommercial.com/product/Citrus-Garbage-Disposal-Drain-Cleaner
BEWARE OF LABELS COMING OFF,ONLY USE SOLUTION TO SOAK INSIDE THE PIECE.

PBW WASH
http://www.northernbrewer.com/shop/powdered-brewery-wash.html
http://fuckcombustion.com/threads/pbw-the-chemistry-of-clean.7854/page-22#post-520486

PBW & the Chemistry of Clean

EDIT
Sorry not sure how I got the quotes mixed up!!

Hey to any 2.0 DLX Hydratube owners out there, how do you clean inside the perc? tried shaking around with salt and iso a bunch but having a hard time cleaning it all out. thanks guys!

 

[olfos]

I own this thing one month now and have to say. that I love it. For on the go this thing isn´t beatable ;-)
I love to fill the bullets, equip my bulletholder and I am ready to fight through the day. Tasty-wise it could be better, imo. But plastic is plastic and no glas ;-)
in cleaning, carrying and loading (bullets and battery) this thing is my partner. At home I prefer my Solo. And maybe in sometime the firefly...I guess in taste it doesn´t go any better.

 

[CarolKing]

I have the Wt that's paired with the Pinnacle Pro, same thing as the DLX unit. I use salt and iso and its been working for me for cleaning. Try this a couple if times. Maybe rinse with some very hot water. I hope this works for you.

I'm waiting on a VaporBlunt Pinnacle Pro car adapter, for those of us on the go. I am really careful what I plug my vapes into. Have seen some catastrophes with portable vapes being plugged in the wrong adapter. The amount of money that we pay for a quality portable vape you can't be too careful.

 

[MileHighLife]

Reporting back ...

I've put my modded pnp through it's paces and where I was getting 4 full sessions and my unit would die early in the 5th now I get 6 full sessions and it dies early in the 7th.

I start my sessions on 2 and quickly move up to 4 sometimes finishing a bullet on 5

 

[BLAZING OG]

Reporting back ...

I've put my modded pnp through it's paces and where I was getting 4 full sessions and my unit would die early in the 5th now I get 6 full sessions and it dies early in the 7th.

I start my sessions on 2 and quickly move up to 4 sometimes finishing a bullet on 5

GREAT NEWS!!!
Thank You

@MileHighLife

 

[Sativape]

Sticks beat me to it , I agree, bad ass bubbler for the price.

That D020 is a great buy!!!
these arent as inexpensive but potentially good buys
http://www.badassglass.com/pocket-recycler-dab-rig.html
These of course are DI joints so it would need a n adapter.
Recyclers are cool but hard to find them for cheap and with a regular female joint !!!

not a bubbler but around 12" in length
http://www.brotherswithglass.com/American_Glass_Water_Pipes_s/412.htm
amazing price for the quality of glass.

I still think @stickstones is dead on with the value you get from the d020, I might pick one up myself!!!!
Medium to smaller pieces seem to work great with the PNP.


Yup, great bubbler!!!!
Good info!!!!
You beat me to it !!!
Been crazy busy, sorry guys!!!!

@ BLAZING OG,

Thanks for the links.
Those were some awesome pieces.

I did place an order for one D020.

The LHS's need to step it up and start carrying more mini bubblers if they want to compete with online stores.

I'm not worried one bit about purchasing the D020 since stickstones, you, and all those other users in the bubbler forum blessed it.

Reporting back ...

I've put my modded pnp through it's paces and where I was getting 4 full sessions and my unit would die early in the 5th now I get 6 full sessions and it dies early in the 7th.

I start my sessions on 2 and quickly move up to 4 sometimes finishing a bullet on 5

@ MileHighLife,

Awesome news about the battery.

Also shows that the battery that VB uses in he PNP is pretty good too.

Next step is to modify the case so it will have a cover to be able to replace the batteries on the fly.

This way you can charge some 18650's and have them ready so no waiting.

You can use a charger like this:

http://www.ebay.com/itm/Nitecore-i4...400-Li-ion-Rechargeable-Battery-/390504697744



@ TherealVaporblunt and Engineering....

Things to think about for the Pinnacle Pro 2:
- replaceable battery
- glass MP with long path
- glass pong
- call it the "Pinnacle Elite" or" Pinnacle Supreme"

 

[phazedout]

@ ellute,

The safest bet for using while charging in the car would be using the AC adapter that comes with the PNP along with an 12VDC to 120AC inverter.

I own a 200W 12VDC to 120AC inverter and it works fine.

I use it in my car all the time.

The USB to 3.5mm adapter cable that you posted will come in handy if you invest in an Anker Astro 3E portable charger that will allow you to charge your PNP while on the go.

I do not own the Anker Astro 3E but you other users have verified that it does charge the unit, but does not allow for plug in usage.

what about this?
http://www.amazon.co.uk/EasyAcc®-16...UTF8&qid=1390488436&sr=1-21&keywords=anker+4A

 

[Sativape]

what about this?
http://www.amazon.co.uk/EasyAcc®-16000mAh-Lighting-Charging-Smartphones/dp/B00H8JYOG2/ref=sr_1_21?s=electronics&ie=UTF8&qid=1390488436&sr=1-21&keywords=anker 4A

This charger can only support 2.1A max for one of the USB ports.

This will definitely not support plug in usage.

I don't even know if it will support charging while the PNP is off.

The 4.4A max is misleading because it is the total amperage of al 3 USB ports combined.

At this point, I would only trust the Anker Astro 3E for not in use charging because again, other FC users have verified that it works.

 

[Grim Chiclets]

Next step is to modify the case so it will have a cover to be able to replace the batteries on the fly.

This way you can charge some 18650's and have them ready so no waiting.

This would be so sick for Cera users! Definitely something I'll be doing once my battery starts to die off..

As for now- I came up with a pretty nifty technique for still managing to get clouds with less bud; though I'm sure people have done it. Basically, I just wanted a mellow buzz this morning, so I packed a bullet of about half abv, maybe even more than 50%, and the rest still greens.. The result is a much quicker-to-heat bullet overall; it started going earlier and had thick clouds almost instantly due to the lack of moisture

After 1 bullet->

I love how many different ways people can use this thing.