Discontinued Pinnacle Pro

[CarolKing]

All week I've been using the glass piece from my Ascent inserted in my pong when I'm not using the WT with the Pnp. It's been working great. I first start out on heat level 2 the go to level 3. Level 2 is very smooth. Level 3 is a bit tickly but its tolerable and I want to extract as much as I can from my herb.

I did crack the glass piece a little but it still works for the time being. It will eventually break, but I have more pieces. It accidentally fell about 2 ft.

 

[OMEiAM]

My WT just arrived. It is definitely a lot smaller than I thought it would be in person. The size makes it portable! I don't remember if this was posted earlier in the thread but this is my large RYOT smell-proof case that fits both the PnP and the WT.

 

[EmDeemo]

My WT just arrived. It is definitely a lot smaller than I thought it would be in person. I don't remember if this was posted earlier in the thread but this is my large RYOT smell-proof case that fits both the PnP and the WT.

Considering I've been thru this thread at least twice, I dont think this exact detail has been posted, and I meant to ask if anyone was doing this. Been on the verge of buying this case for a while, so thanks!

How safe does the glass seem? Def no room for any of the padding that comes with the case? How solid is the case? How many more questions can I ask? What colour pants are you wearing?

 

[CapitalFlower]

Does anyone know where I can get hold of a spare mouthpiece for the PnP? The little end bit, it's got really gunked up with residue.

Also I'm in the UK.

Thanks alot guys

 

[420time]

lol i have from the same company but its kinda is oval and more non round. i dunno, the lil black and inside is some kind of seal in smell material but that dosent work alone. took it out side in my pocket reeked of flowers.

 

[OMEiAM]

Considering I've been thru this thread at least twice, I dont think this exact detail has been posted, and I meant to ask if anyone was doing this. Been on the verge of buying this case for a while, so thanks!

How safe does the glass seem? Def no room for any of the padding that comes with the case? How solid is the case? How many more questions can I ask? What colour pants are you wearing?

The case comes with padding on each side (that can be removed) but sadly both of the paddings need to be removed to fit the PnP + WT (or PnP + Pax). The fit is snug so the there will be no movement inside of the case. Everything feels safe (as in I could drop the case with everything inside staying safe). If I am only using the case with the WT I would definitely put both of the paddings back on (obviously).

 

[CarolKing]

I think many of us don't even use the tip for the mouthpiece, because it gets gunked up. They sell them on VaporBlunt website. I personally use the pong as a mouthpiece. This works better for me.

Since you live in the UK you probably want to find a European Co to buy from.

 

[EmDeemo]

The case comes with padding on each side (that can be removed) but sadly both of the paddings need to be removed to fit the PnP + WT (or PnP + Pax). The fit is snug so the there will be no movement inside of the case. Everything feels safe (as in I could drop the case with everything inside staying safe). If I am only using the case with the WT I would definitely put both of the paddings back on (obviously).

Thats great, thanks. The pic with both the PnP and WT in the case really helps sell me on it the more I look at it. I've just been using an old case that my glasses came in up until now, which doesnt fit the WT and certainly doesnt seal well.

Thanks again, I'll be ordering one next week

I think many of us don't even use the tip from the mouthpiece, because it gets gunked up. They sell them on VaporBlunt website. I personally use the pong as a mouthpiece. This works better for me.

Since you live in the UK you probably want to find a European Co to buy from.

The PonG is the shit!

 

[420time]

this is mine

 

[EmDeemo]

this is mine

oooOOOoooh! So thats the other smell proof RYOT case? If so, any chance of a pic with the PnP/WT in it? Is it as soft as it looks? Not sure I'd trust the WT in it considering how clumsy I am

 

[420time]

sureee gimme a few hours till i can hold a camera better.

 

[BLAZING OG]

posted these a while back, dont think it will fit the WT, but it fits PNP an a few extras, cheap leather cigar case.

 

[EmDeemo]

lol i have from the same company but its kinda is oval and more non round. i dunno, the lil black and inside is some kind of seal in smell material but that dosent work alone. took it out side in my pocket reeked of flowers.

I thought the two that had been posted were the only two that came with 'smell proof underwear'? I have been wondering how effective the smell proofiness would be tbh...

posted these a while back, dont think it will fit the WT, but it fits PNP an a few extras, cheap leather cigar case.

Nice little set up Mr OG, I remember admiring this on my travels thru these pages. That blunt/cigar tube thing is on my shopping list for spare bullets for sure. Nice one

 

[vapor33]

Ok, so I just got my PNWT and I tried using it and I feel like I got better results just using the PNP by itself.

I put the water in the WT just barely above the holes, like maybe a 1/4 of an inch. Should the water level above the holes be a little higher?

And then when I pulled on it, the vapor production wasn't as good as I see it in other peoples WT videos. Also, I started on level 2 and then 3.

@BLAZING OG - I watch your vids and when you start to pull you see this huge white vapor fill the chamber. I'm not getting that, just trying to figure out what happened. If I just use the PNP by itself dry, I get huge clouds, then I try out my WT and it was just ok. I must have did something wrong. Maybe I just need to try it again.

 

[SSVUN~YAH]

I suggest tamping down the herb in the bullet or get a few honeycomb or glass screens to weigh it down. I've found that when the herb sticks out of the bullet and sticks to the screen, vapor quality suffers.

 

[CarolKing]

Ok, so I just got my PNWT and I tried using it and I feel like I got better results just using the PNP by itself.

I put the water in the WT just barely above the holes, like maybe a 1/4 of an inch. Should the water level above the holes be a little higher?

And then when I pulled on it, the vapor production wasn't as good as I see it in other peoples WT videos. Also, I started on level 2 and then 3.

@BLAZING OG - I watch your vids and when you start to pull you see this huge white vapor fill the chamber. I'm not getting that, just trying to figure out what happened. If I just use the PNP by itself dry, I get huge clouds, then I try out my WT and it was just ok. I must have did something wrong. Maybe I just need to try it again.

Add water to the top of the "c" in the word Pinnacle that's written on the side of the WT. Add water slowly all the way to the very corner of the "c" almost to the top of the corner maybe just a slight hair below, but not much.Then a practice draw before you attach it to your unit.

I have used a glass pipe screen that they've used for the Ascent on top of the bullet(little) flower with a stem. Lately I've just been using a little cotton. It keeps everything nice and clean.

 

[Tweek]

Ok, so I just got my PNWT and I tried using it and I feel like I got better results just using the PNP by itself.

I put the water in the WT just barely above the holes, like maybe a 1/4 of an inch. Should the water level above the holes be a little higher?

And then when I pulled on it, the vapor production wasn't as good as I see it in other peoples WT videos. Also, I started on level 2 and then 3.

@BLAZING OG - I watch your vids and when you start to pull you see this huge white vapor fill the chamber. I'm not getting that, just trying to figure out what happened. If I just use the PNP by itself dry, I get huge clouds, then I try out my WT and it was just ok. I must have did something wrong. Maybe I just need to try it again.

For the water tool, I would suggest level 3-4 at least. I usually go as high as 4-5. Packs a really big punch every time. The unit will produce thicker clouds as you progress, and the load gets hotter.

As to water level, I fill it until just above the holes...be careful if you are leaning back though, as this can cause the water level to drop and that will kill the effect.

 

[BLAZING OG]

Ok, so I just got my PNWT and I tried using it and I feel like I got better results just using the PNP by itself.

I put the water in the WT just barely above the holes, like maybe a 1/4 of an inch. Should the water level above the holes be a little higher?

And then when I pulled on it, the vapor production wasn't as good as I see it in other peoples WT videos. Also, I started on level 2 and then 3.

@BLAZING OG - I watch your vids and when you start to pull you see this huge white vapor fill the chamber. I'm not getting that, just trying to figure out what happened. If I just use the PNP by itself dry, I get huge clouds, then I try out my WT and it was just ok. I must have did something wrong. Maybe I just need to try it again.

I always suggest tapping down a bit to kep herb in place while your inhaling. I like to heat soak my bullets before pulling any air thru. Try to let the bullet soak up heat from chamber maybe like 5-10 seconds before you begin to draw. Material can also have an effect, but if your saying that dry with the same herb its not working with the PNWT, then yeah , try to heat soak and see if that helps.
I use level 3-4 for the water tool with great success.

 

[dac13]

Hey guys, So I was wondering about the bullet system for use with herbs and also oils. I understand how all the parts go together, but what I was wondering is are you supposed to put the bullet in and then let the device heat up? or is it better to let the device heat, and then once it reaches temp you drop in the bullet?

Also the same question for oils, because I feel like with oil you'd have to heat up the PnP first and then drop the bullet with the oil in after its already reached temp. Otherwise wouldnt some of the oil start vaping before it reaches temp?

Thanks in advance

 

[BLAZING OG]

Hey guys, So I was wondering about the bullet system for use with herbs and also oils. I understand how all the parts go together, but what I was wondering is are you supposed to put the bullet in and then let the device heat up? or is it better to let the device heat, and then once it reaches temp you drop in the bullet?

Also the same question for oils, because I feel like with oil you'd have to heat up the PnP first and then drop the bullet with the oil in after its already reached temp. Otherwise wouldnt some of the oil start vaping before it reaches temp?

Thanks in advance

everyone is different, with that said I like heating the pnp first then dropping in loaded bullet and letting it heat up bullet for a few seconds 5-10. For oils You can either dump the cart in with the oil as its heating up or once heated up drop bullet in let it get up to temp then drop oil in.

 

[dac13]

Awesome thanks! Ive spent the last week reading reviews on all the portable vapes as this will be my first one and I think I have finally settled on getting the Pinnacle Pro.

Ive heard of people using the water tool on settings 4 and 5. at setting 4+ wouldnt it be closer to burning than vaping?

I understand that you get more smoke without the water tool at heat level 2 than WITH the water tool at level 2. but in the end youre still getting the same amount of Active Ingredients right? you just see it less?

I guess it just seems most people say they use a higher temp setting when they are using the water tool, but I dont understand why they dont just use the same temp as without the water tool. I know it sounds dumb I just didnt know if theres something I am missing like the water tool makes smaller hits at low temp or something like that?


Like If i like it without the water told on level 2 and I like the feeling I get from that, the water tool will just make it smoother, to me that doesnt mean I need to turn the temp up just because i can

 

[420time]

oooOOOoooh! So thats the other smell proof RYOT case? If so, any chance of a pic with the PnP/WT in it? Is it as soft as it looks? Not sure I'd trust the WT in it considering how clumsy I am

You can just place the mouthpiece inside the smaller bag and place the bullets inside something then put it in the small bag.

its softy cardboard inside feeling. well cardboard feeling is only the front and the back. sides are soft. never took my vaporizers or the case outdoors so idk how well it really works. only thing i ever take outdoors are spliffs.

 

[Herr_Dampf]

Soon I am part of the PNP family as well! Any euros know a site that sells WT by itself?

 

[BLAZING OG]

Soon I am part of the PNP family as well! Any euros know a site that sells WT by itself?

The yoyokid on ebay is a authorized vapor blunt dealer, might even be able to send him a bid and see if he accepts, if not www.thevaporblunt.com.

 

[CarolKing]

Awesome thanks! Ive spent the last week reading reviews on all the portable vapes as this will be my first one and I think I have finally settled on getting the Pinnacle Pro.

Ive heard of people using the water tool on settings 4 and 5. at setting 4+ wouldnt it be closer to burning than vaping?

I understand that you get more smoke without the water tool at heat level 2 than WITH the water tool at level 2. but in the end youre still getting the same amount of Active Ingredients right? you just see it less?

I guess it just seems most people say they use a higher temp setting when they are using the water tool, but I dont understand why they dont just use the same temp as without the water tool. I know it sounds dumb I just didnt know if theres something I am missing like the water tool makes smaller hits at low temp or something like that?


Like If i like it without the water told on level 2 and I like the feeling I get from that, the water tool will just make it smoother, to me that doesnt mean I need to turn the temp up just because i can

I use the WT on levels 2 and 3. I have gone up to level 4 but just a few times.
Do what works for you, everyone is unique in their own way.

What works one one person may be different for someone else.
The Pnp WT works great to cool the vapor. The pong doesn't fit very tight on the Pnp, so be careful not to let it fall. If it drops it will break. It can get expensive, I've broken 2.
The WT works well with my Solo, just use your gong 14 mm size.

Good Times