Will the ZXXL feature the previously mentioned taper between the bowl and the heater? This would be great for passing around and for leaving the wireless unit on top of the bowl throughout a session. Given its size, I imagine you could likely clear a bowl without needing to reheat it, especially if it has a good seal. We should make a list of the unique features the ZXXL has that differentiates it from the rest of the market.
How long ago were you looking? The price looks the same to me?Of course, on the day I finally decided to go for an ZX the price goes up - just my luck
Its 300USD for the ZX Plug&Play Bundle for me, yesterday it was 250 - just checked again.How long ago were you looking? The price looks the same to me?
Its 300USD for the ZX Plug&Play Bundle for me, yesterday it was 250 - just checked again.
Its 300USD for the ZX Plug&Play Bundle for me, yesterday it was 250 - just checked again.
Are you sure you didn't confuse the ZXL bundle for $250 with the ZX bundle for $300. I think the ZX bundle has stayed the same price. They are different as the ZX bundle has the coil installed.
Are you sure you didn't confuse the ZXL bundle for $250 with the ZX bundle for $300. I think the ZX bundle has stayed the same price. They are different as the ZX bundle has the coil installed.
I’ve been drooling over the zx kit too. Trying to sell some other vapes (I hate having too much stuff) before clicking check outIt was absolutely 100% 250USD the last weeks until today, already got it in the shopping cart for shipping calculations and so on.
It may help the pre-order if the website showed the number of units left out of 50. That information could be useful to potential buyers. One idea to consider.
Z Tribe
Will the ZXXL feature the previously mentioned taper between the bowl and the heater? This would be great for passing around and for leaving the wireless unit on top of the bowl throughout a session. Given its size, I imagine you could likely clear a bowl without needing to reheat it, especially if it has a good seal.
Could ZXL or a diffuser such as ZXXL (let's pretend this is not wireless to reduce variables) be more suitable than ZX for doing a few hits with one bowl instead of one? And maybe work even better at low temperatures because of the greater mass?
Are these two fast enough as the ZX to change temperatures?
For everyone who has ZXL, what is the minimum amount that you can effectively use in the bowl and what is the average amount that you use?
Ryan and me just had a misunderstanding. Its all good, i re-ordered and everyone is happy
Of course, on the day I finally decided to go for an ZX the price goes up - just my luck
Just want to back up what @xerop said; I've been eyeing P3 vapes for a bit and seriously considered purchasing the recent ZX Plug-&-Play Bundle for $250, which is now $300; held off after seeing the ZXXL
Hmm
If only we could have the weekend to complete the deal ?
Keep up the good work
This is a great discount code, but I think it might apply to things you don't want it to. Just thought you'd like the heads up. I doubt you'll be sending out glass bowls for the cost of shipping.Use code GRACIAS if you’re ready to roll!
I actually have anxiety about a world where the ZX no longer exists, and I haven't even taken delivery of mine yet I think it's because it really is my perfect ball vape, that seems designed to avoid every single bug bear I had for ball vapes.Sorry I forgot to answer this.
My webstore can only show a count if it’s not listed as a preorder, I guess I should have done it that way and just put a preorder banner up. I’ll mess around and see if I can edit the current orders and change that.
As of now we’re 30% of the way towards our goal of pre selling 25 units. I haven’t posted anything on my Instagram yet so that might help push things forward!
Yes! It has a tapered connection for a real seal, just like laboratory glass.
Also thermodynamically speaking it will literally have more heat retention than any other wireless due to the dense material choice. It’s interesting to see wireless vapes made of commercially pure titanium, a material known for its light weight and lack of mass
if you want to do more hits per bowl you can just turn the temperature way down. That’s the beauty of PID control.
No, a physically larger device with more mass is always going to take longer to change temps than a smaller + lighter device as these coils are all operating at the same wattage.
You can use as little as you want in the ZXL but I wouldn’t say it’s better than the ZX for anything under 0.2g
Cheers dude!
Yes prices are going up to account for all my rising expenses. I meant to post about this coming the other day but my internet has been out and I guess I forgot. Sorry about that - Still cheaper than any well regarded portable with incomparable power and purity. Seen plenty of Dynavap stems sell by themselves for more than my medical grade plug & play ZX kit. I figure if a complete ZX kit isn’t worth $300 they will just be discontinued to make room for something more sustainable.
If you’re ready to join the Z Tribe use code GRACIAS during checkout.
I’d recommend jumping in the pool before they are gone forever. This is an industry where most of the sales are on the entry level. These type of boutique products are truly not sustainable and without people buying them the availability will dry up eventually.
Look at all the work involved in trying to bring a product to market which I’m only hoping to sell 50 units. Based on ZXL data it could take 6 months to a year to sell that many. This is not a smart investment for this company it’s a nod to the community who knows nobody else will even attempt it (because it’s not profitable)
The price of the ZXXL has a lot to do with all the sales I won’t be getting by offering such a boutique specialty product. And it’s still less than a Venty. Not comparing, just saying.
Use code GRACIAS if you’re ready to roll!
But yeah prices are going up to $300, that’s actually where they started, not really an increase per say. All these lower prices have been super extended promos trying to grow the brand, which in retrospect didn’t really work that well but we tried and had some fun along the way
As of now we’re 30% of the way towards our goal of pre selling 25 units. I haven’t posted anything on my Instagram yet so that might help push things forward!
I wouldn’t say it’s better than the ZX for anything under 0.2g
If you’re ready to join the Z Tribe use code GRACIAS during checkout.
Look at all the work involved in trying to bring a product to market which I’m only hoping to sell 50 units. Based on ZXL data it could take 6 months to a year to sell that many. This is not a smart investment for this company it’s a nod to the community who knows nobody else will even attempt it (because it’s not profitable) The price of the ZXXL has a lot to do with all the sales I won’t be getting by offering such a boutique specialty product.
After going through other zirconia vapes, I've noticed an issue with threaded caps cracking.
I couldn't find any pictures but there might be some out there. More information can be found in the Zeal and Ω thread or the Cloud Connoisseur Discord. From what I gathered the issue didn't affect every unit and there was a design update to address the problem but the device has since been discontinued. It appears the issue could have been caused by thermal expansion, the lid being screwed on too tightly, or frequent removal and replacement of the lid. Zirconia is hard but it is also brittle.We have had a few lids crack, we’re currently in talks with the manufacturer and trying to find what the cause would be on these few units. I will update everyone as I have more information.
A good time to remind people to only finger tighten your caps, not only for thermal expansion with zirc but I’ve had a couple people have a really heck of a time trying to get the SS head off after it was heated when so tight. With zirc I also like to make sure my coil is not resting about threads to alleviate pressure.
Hey Ryan, wondering if a certain check-out method is cheaper for you…
@invertedisdead
This is a great discount code, but I think it might apply to things you don't want it to. Just thought you'd like the heads up. I doubt you'll be sending out glass bowls for the cost of shipping.
I actually have anxiety about a world where the ZX no longer exists, and I haven't even taken delivery of mine yet I think it's because it really is my perfect ball vape, that seems designed to avoid every single bug bear I had for ball vapes.
I can see myself buying a spare in the future. I would definitely pick up any 16mm wireless variants also.
What is the max capacity of the ZXLB and ZXXLB?
After going through other zirconia vapes, I've noticed an issue with threaded caps cracking. Has the ZXXL been designed to address this? Would it be possible to design it to accept both the threaded cap and stainless steel screens? It seems that the issues with zirconia cracking are primarily associated with threaded components, which could potentially affect the handles as well. It may be worth seeing if you can thicken the threads, and flatten the ends slightly to reduce the chances of chipping. Also, increasing the wall thickness, even if it reduces the size of the ruby chamber, might be beneficial and given zirconia's density the reduction in rubies shouldn't be a significant compromise. Although I would be disappointed to see the threaded parts go, I'm willing to accept this compromise for increased longevity and robustness. Keep in mind I'm not familiar with the manufacturing process so I'm not sure what is and isn't possible.
I couldn't find any pictures but there might be some out there. More information can be found in the Zeal and Ω thread or the Cloud Connoisseur Discord. From what I gathered the issue didn't affect every unit and there was a design update to address the problem but the device has since been discontinued. It appears the issue could have been caused by thermal expansion, the lid being screwed on too tightly, or frequent removal and replacement of the lid. Zirconia is hard but it is also brittle.
Would it be possible to design it to accept both the threaded cap and stainless steel screens?
Are there any compatible controllers (DNail Pinout) that are either prettier, easier to use, or smaller? Or are the all just the same design as the one offered in the Plug-&-Play Bundle?
Are there any compatible controllers (DNail Pinout) that are either prettier, easier to use, or smaller? Or are the all just the same design as the one offered in the Plug-&-Play Bundle?
Auber, D-Nail, and Disorderly Conduction all work with the coils I've received from Phase 3.
This is the PID controller I use most often and used exclusively and quite successfully with my ZX and SX.Thanks. Does the the auber RDK-300B work? It looks a little big, but seems like the nicest design I have seen.
8835-D067-1-F88-490-D-AFB5-2-DB57-E851-DD1 hosted at ImgBB
Image 8835-D067-1-F88-490-D-AFB5-2-DB57-E851-DD1 hosted in ImgBBibb.co