Phase3 Vaporizers

[coolbreeze]

Ordered my PID & 16mm coil in anticipation of the SX launch.. I'm ready, but have a quick couple questions:

1) I've never used a PID before. Are the temperatures roughly comparable to what I'd expect if I have used a temperature controller on a volcano hybrid? How hot do you typically set your coil to, I'm completely in the dark on the range expected for injectors like this.

The temps are not comparable necessarily: they measure the temp of the coil, nothing more. For my B0 I usually run it about 575f; with the Z8 it's more in the 495-525 range. My guess is it will be somewhere in between, higher than the Z8, but maybe not as hot as the B0.

2) Okay, basic setup / coil install / burn-off (i assume this is gonna be a Good To Do step, ordered from VGoodiez, didn't see mention of a pre-burn off) uhh yeah, I'll probably be asking for specific install help once the SX arrives, but I assume this isn't too difficult to manage with basic tools access?

Inverted guided me through tightening my coil and it was easy, I wouldn't think you'd have problems and there's great help at hand. ; )

Hype for the launch..! Looking forward to a whole new experience.

Me too! If you haven't tried an injector previously, you're gonna love it!

 

[Feelingmedicated]

Just got my 16mm coil in. I can’t wait for my sx now!

 

[Oden]

Hi guys !
Do you think these adapters will be good for the SX???
At the moment I only have the Phase 3 bowl that I bought, and I was actively looking for 14 female adapters but with a 18 male joint!
Almost impossible to find in Europe, and what I find from the US requires very expensive shipping costs.
This site offers me 10 dollars for international shipping.
Thank you in advance for your opinions

Small Adapter Bongs | GoSensi

this simple joint size adapter comes in a huge variety of conversion sizes and m-f/f-m configurations.

gosensi.com

 

[erka]

Hi everybody
How can i buy some z8 ?
Good vape

 

[Abele Rizieri Ferrari]

Hi everybody
How can i buy some z8 ?
Good vape

Still working on getting the next round of Z8's going - hopefully not much longer there!

 

[erka]

Ok i must send a mp or there's a site ?

 

[androponic]

Ok i must send a mp or there's a site ?

www.gophase3.com

 

[coolbreeze]

Hi guys !
Do you think these adapters will be good for the SX???
At the moment I only have the Phase 3 bowl that I bought, and I was actively looking for 14 female adapters but with a 18 male joint!
Almost impossible to find in Europe, and what I find from the US requires very expensive shipping costs.
This site offers me 10 dollars for international shipping.
Thank you in advance for your opinions

Small Adapter Bongs | GoSensi

this simple joint size adapter comes in a huge variety of conversion sizes and m-f/f-m configurations.

gosensi.com

To be honest, I'd look for something with as deep a grind on the female end as you can find--it'll let you put the screen a little deeper. These are what I use:

Male to Female Adapter | Shop Adapters, Beakers and Bong Accessories - Thick Ass Glass

Order male to female pipe adapters for your bong at Thick Ass Glass. Our TAG adapters feature 1 - 14MM Male joint and 1 -10MM Female joint. We carry a large inventory of water pipe accessories. Shop online.

www.thickassglass.com

Or maybe this might work:

18mm to 14mm female to female water pipe adapter.

This glass piece allows you to convert a 14 mm male joint to an 18 mm female joint or an 18 mm male joint to a 14 mm female joint.

lacentralevapeur.com

 

[Abele Rizieri Ferrari]

https://m.dhgate.com/product/glass-accessories-drop-down-wholesale-male/763406518.html

Maybe this cheap one will work as well?

 

[coolbreeze]

https://m.dhgate.com/product/glass-accessories-drop-down-wholesale-male/763406518.html

Maybe this cheap one will work as well?

I'd try it. Since the SX will only go in a couple/few mm and these are hard to judge online, it couldn't hurt too much to try what looks likely at the right price because it indeed may work even if it's not as deep as you'd prefer. As long as there's a bit of room, maybe a temp adjustment can do the rest.

 

[Oden]

Pour être honnête, je chercherais quelque chose avec une mouture aussi profonde sur l'extrémité féminine que vous pouvez trouver - cela vous permettra de mettre l'écran un peu plus profondément. Voici ce que j'utilise :

Precisely I want the bowl to allow a rapprochement. I would have the Phase 3 bowl for deep loading.
The tag adapter is badass, but I'm not planning on buying any glass rigs from their site, I've opted for something else.. so paying $64 shipping for a $20 adapter isn't very interesting to me

Ou peut-être que cela pourrait fonctionner

Yeah, I've seen this one before. I feel like it's an 18 female to a 14 male.

 

[Abele Rizieri Ferrari]

There's also the bowl by 420engineer.

Maybe this thread is a better place to discuss:

14mm injector bowls?

I have a CouchLog, the heater fits 14mm female joints natively. I’m interested in trying it “injector style” with a glass bowl, similar to the DCE, FP, etc. Does anyone know of a 14mm female to 14mm male adapter that accepts a standard size screen in the middle? I’d prefer non-DH Gate if...

fuckcombustion.com

 

[Haze Mister]

The injector bowl blues keep goin'
I got some white ones in the oven
When is the man gonna deliver
I have become a true believer

It's the injector bowl blues, yo
Premium vaping, we got ruby balls
Using cheap-ass lame bowls
Glass blowers don't give a fuck
They make fat stacks selling heady butt plugs

 

[Vaporware]

Glass blowers don't give a fuck
They make fat stacks selling heady butt plugs

Heady butt plug bowls for Vapor Boofing?

 

[coolbreeze]

Heady butt plug bowls for Vapor Boofing?

If they've been on reddit for a minute they probably recognize a market.

 

[invertedisdead]

SX shipping out tomorrow!

 

[AlphaDeltaF1]

SX shipping out tomorrow!

They look great. So stoked to get my hands on an OG Baller vape!

Would you recommend stretching the coil to fit the length of the housing?

 

[Oden]

SX expédié demain !

Sex !

Recommanderiez-vous d'étirer la bobine pour l'adapter à la longueur du boîtier ?

Personally that's what I'm going to do

 

[invertedisdead]

They look great. So stoked to get my hands on an OG Baller vape!

Would you recommend stretching the coil to fit the length of the housing?

Thanks so much for your support and patience while I got them together!

I made these a little bit shorter than the Z8, IMO unless you're using a coil with less wraps it's not really necessary to stretch the coil, as the beads will bridge any thermal gaps, but there's no problem doing it either way.

Sex !


Personally that's what I'm going to do

Thank you!
Can't wait to hear how everyone likes these!

 

[madhockeydad]

Shipping notification just received!! Super!! Have a great weekend!! Vape on!

 

[Cheebsy]

Can't wait to hear how everyone likes these!

Me too! How do you like them mate?

 

[coolbreeze]

Shipping notification just received!! Super!! Have a great weekend!! Vape on!

Same! w00t!

 

[Grass Yes]

Same! w00t!

I'll have mine Tuesday, if not sooner! Pretty excited. Although I somehow have a few new vapes arriving close together. Feast or famine, I guess.

 

[coolbreeze]

I'll have mine Tuesday, if not sooner! Prett. excited. Although I somehow have a few new vapes arriving close together. Feast or famine, I guess.

Wow! Tuesday for me too, looks like! Can't wait to hear the reactions, this'll be fun.

 

[onesixty2]

Mine is less than 2 hours away from me.. we might get a lucky Saturday delivery, but I'm still waiting on a PID power cable that was missed on my order earlier this week, so that suggests Thursday is takeoff day for me.