gongman
New Member
What ultrasonic do you have?
-
SCAM WARNING! See how this scam works in Classifieds.
Phase3 Vaporizers
- Thread starter invertedisdead
- Start date
PurpleHaze1911
Member
Yes just go to website place order. They’re still available to order.
Order today, next week you will be on the ZX train.
Cheebsy
Fermentation Fiend
It's just a generic from Amazon. I just choose it based on the basin size. If I were to buy another one, which I will eventually, I'd get one a bit bigger than normal with an onboard heater. You don't need anything special though, warm water with your iso in a separate container works well for about 30 mins. The cleaner helps to keep it warm as well.
gongman
New Member
As my arsenal of glass continues to grow I like the idea of an ultrasonic cleaner
Hell yeahhhhh ordered!
VapoBubbler
Member
I've had the ZX for two weeks now, and it's still getting better and better 
The more I use it, the more it showes its strengths – and pretty much everything about it is one!
I don´t know what I love most about the ZX, the fact that:
- it really is a realiable one hitter, I currently run it at 535f and got my chambers (around 0.1g) done in under 10 seconds, without preheating.
But with higher temperatures and/or preheating, it can extract bigger bowls or even hash(-mix) bowls even faster, thats really impressive.
- its small enough to handle the smallest microdosing loads and to fit on little pipes or bubbler, which was my concern with other ball vapes. Love the size and handling!
But its still big enough to hold more than I would ever put in. (OK maybe I will)
- its soo smooth, I use it with less water (=less terpene loss) and extract much faster than before, and it still gives me less cough!
(I was using arizer air max and dynavap M7 with water pipes before).
- it delivers the purest taste I ever experienced, and the effects are more clear (less tiredness and "brain fog" which comes along with conduction and different materials - Amazing that its actually such a difference)
- it barely needs any cleaning, after two weeks I changed the screen, which was done in under a minute. The whole handling and usage takes me much less time than before, so its more time for the fun part
Can´t tell anything bad about it, every session is a pure pleasure.
The more I use it, the more it showes its strengths – and pretty much everything about it is one!
I don´t know what I love most about the ZX, the fact that:
- it really is a realiable one hitter, I currently run it at 535f and got my chambers (around 0.1g) done in under 10 seconds, without preheating.
But with higher temperatures and/or preheating, it can extract bigger bowls or even hash(-mix) bowls even faster, thats really impressive.
- its small enough to handle the smallest microdosing loads and to fit on little pipes or bubbler, which was my concern with other ball vapes. Love the size and handling!
But its still big enough to hold more than I would ever put in. (OK maybe I will
)- its soo smooth, I use it with less water (=less terpene loss) and extract much faster than before, and it still gives me less cough!
(I was using arizer air max and dynavap M7 with water pipes before).
- it delivers the purest taste I ever experienced, and the effects are more clear (less tiredness and "brain fog" which comes along with conduction and different materials - Amazing that its actually such a difference)
- it barely needs any cleaning, after two weeks I changed the screen, which was done in under a minute. The whole handling and usage takes me much less time than before, so its more time for the fun part
Can´t tell anything bad about it, every session is a pure pleasure.
Finweeder
Member
Ok think I got pics working. here is my pride and joy, plus a new find, the ball vape holder.
I love all the Informed posts by the vets here
Forgot to mention that's the Texas Hot Glass Sherlock Recycler, A Absolute joy to use. The lady bug is a pot for a plant from Lowes, houses a air plant. that needed to be rehomed. cant smoke that one. prefect size for the ball vape, does get hot tho, but who cares its awesome looking, not bad to 8 bucks. The Sharpe eyed will see I updated the power cord to a cloth covered one that's is also more flexible while giving the pid a more vintage look. (16 ga. 13 amp from the zon. 10 bucks.
I love all the Informed posts by the vets here
Forgot to mention that's the Texas Hot Glass Sherlock Recycler, A Absolute joy to use. The lady bug is a pot for a plant from Lowes, houses a air plant. that needed to be rehomed. cant smoke that one. prefect size for the ball vape, does get hot tho, but who cares its awesome looking, not bad to 8 bucks. The Sharpe eyed will see I updated the power cord to a cloth covered one that's is also more flexible while giving the pid a more vintage look. (16 ga. 13 amp from the zon. 10 bucks.
ColdAssistant
Well-Known Member
I’m searching on Amazon and can’t locate that cord - link please
I really dislike the power cord for the Auber - this is exactly what I am looking for!
tasticleeze
Steward of the Garage
Lowe’s is an excellent idea! I’m still searching for a good stand after I got spooked from Amazon reviews on the last one I cancelled
howie105
Well-Known Member
Are we talking about this? https://www.amazon.com/1-Pack-FILSH...CX7D?source=ps-sl-shoppingads-lpcontext&psc=1
Spy Car
Well-Known Member
I've had the ZX for two weeks now, and it's still getting better and better
The more I use it, the more it showes its strengths – and pretty much everything about it is one!
I don´t know what I love most about the ZX, the fact that:
- it really is a realiable one hitter, I currently run it at 535f and got my chambers (around 0.1g) done in under 10 seconds, without preheating.
But with higher temperatures and/or preheating, it can extract bigger bowls or even hash(-mix) bowls even faster, thats really impressive.
- its small enough to handle the smallest microdosing loads and to fit on little pipes or bubbler, which was my concern with other ball vapes. Love the size and handling!
But its still big enough to hold more than I would ever put in. (OK maybe I will
- its soo smooth, I use it with less water (=less terpene loss) and extract much faster than before, and it still gives me less cough!
(I was using arizer air max and dynavap M7 with water pipes before).
- it delivers the purest taste I ever experienced, and the effects are more clear (less tiredness and "brain fog" which comes along with conduction and different materials - Amazing that its actually such a difference)
- it barely needs any cleaning, after two weeks I changed the screen, which was done in under a minute. The whole handling and usage takes me much less time than before, so its more time for the fun part
Can´t tell anything bad about it, every session is a pure pleasure.
I'm at about the two week mark myself, and my experience strongly mirrors what you've written here.
I did get curious about the size of my loads, as I don't ordinarily weigh them. So I took what I considered a typical dose, weighed it, and--would you believe it?--it came out to 0.1046 grams.
I feel like the ZX does a masterful job of dealing with this sort of load as an essentially "one-hitter," and that the additional capacity of the ZX far exceeds my own lung capacity (which I'd rate as rather high).
I do laugh about the term "microdosing" in this context, as a ZX can definitely deliver a bigger and snappier hit that I imaging any mere mortal could handle in one go. This unit "crushes."
I'm continuing to set my included PID to lower temps that most are reporting. I'm still dialing-in, but 465f seems to give me the best taste and effects for my preferences.
The ABV at 465f is thoroughly (and evenly) toasted.
My only minor niggle (with an otherwise brilliant device) is that I wish the screen in the bottom bowl could be fixed in place with complete security. It isn't bad as it is, but the screen can get fiddly, and if I were able to get it to firmly lock in place every time, I'd prefer it.
Perhaps I'll become more skilled in seating that bottom screen?
Niggle aside, the ZX has definitely taken the crown in my vape collection. The taste, the potency, the efficiency, and the cool-factor of zirconia make this device world-class in my estimation.
To say that I have "no regrets" is rather an understatement.
Bill
add1noob
Well-Known Member
Are you using the ZBowl? Mine stays in place really well especially after 1-2 bowls.
I have the 1st gen ZBowl and the latest gen ZBowl its interesting to see the differences between them. All major improvements in my opinion.
Also just got this from THG and it has easily become my favorite piece can't wait to use it with the ZXXL.
It looks like THG´s take on the prophet..
add1noob
Well-Known Member
Yeah I ask them to make me a prophet because I didn't want to wait for it to restock. Also MADE IN USA BABY.
They have added them to their site.
I change screens all the time and that's the biggest annoyance. You can get around it by:
- Take the screen out and clean your bowl
- Take the time to put a screen in the position you want
- Find a 12mm dowel, drill bit, or anything that fits well into the bowl.
- Push the dowel into the BOTTOM of the bowl until it hits the screen.
- Wrap tape around the dowel where the bowl ends for several wraps.
Now when you want to put a new screen in, clean your bowl and insert the dowel from the bottom. The top of the dowel will be lined up with the screen indent and you can drop a screen down the top and push it right into place first time every time.
Last edited:
jbm
Well-Known Member
I’m interested in one of those but they’re sold out. Can’t find a contact to ask if they’ll make more.Yeah I ask them to make me a prophet because I didn't want to wait for it to restock. Also MADE IN USA BABY.
They have added them to their site.
coolbreeze
Well-Known Member
It was under 'For wholesale inquiries'
jbm
Well-Known Member
Thanks!It was under 'For wholesale inquiries'
add1noob
Well-Known Member
It’s easily become my favorite rig and it works amazing with the ZX. Will be perfect for the ZXXL.
mistergyro
Well-Known Member
Does anyone own a ZX and an Herborizer? If so, I'm wondering how you think they compare? I've had a few ball vapes but nothing has matched the flavor of the Herborizer.
tasticleeze
Steward of the Garage
Great idea!! That looks durable and very clean, I hope it runs great!Yeah I ask them to make me a prophet because I didn't want to wait for it to restock. Also MADE IN USA BABY.
They have added them to their site.