Oregonglassblower (mike) Custom Glass Adapters and Accessories

[alltoreup]

I recently had Mike make a custom mouthpiece for my Colie gridded upline and he nailed exactly what I was looking for. I wanted a MP that you simply put your mouth against. Not in or around. Not an easy thing to find. I also wanted it long enough to where you can hit it and watch it at the same time. It ended up being perfect bar height.
Thanks again, Mike!!

Obligatory milk shot

 

[cybrguy]

@Oregonglassblower What is the length, tip to tip, of your standard M2M adapters?

 

[Oregonglassblower]

@Oregonglassblower What is the length, tip to tip, of your standard M2M adapters?

The 18mm ones are right about 3 inches and the 14mm ones 2 1/2 inches but i can make them any length you may need.

 

[SSVUN~YAH]

I got my 14M-18F 32.5 degree attachment and it rocks, thanks Mike!

 

[Oregonglassblower]

cut and paste this from the YouTube field:

Drew up a couple sketches and Mike was able to create this piece. Maintains airflow and clears tube perfectly with no more redraw from the evo itself. easily a must have for drastically improved pulls, safety and convenience.

Male 14mm plug is the carb stopper in a standard 14mm female joint. When I need to change elbs or end my session I unplug the adapter and seat it right on the hydrafoot. Simple!


Thanks Mike!

oregonglassblower.com
fuckcombustion.com
vapexhale.com

Being getting some requests for these so i thought i would post a link to make it easier. I can customize them to any size.
http://oregonglassblower.com/Carbed-Glass-Vape-Adapter-18fvc.htm

 

[Snappo]

Being getting some requests for these so i thought i would post a link to make it easier. I can customize them to any size.
http://oregonglassblower.com/Carbed-Glass-Vape-Adapter-18fvc.htm

Glad to see you've really expanded your "Reclaimer" selection! Best selection on the internet in one place - and best quality too!!!
http://oregonglassblower.com/GLASS-RECLAIMERS_c2.htm

 

[Jaindoh]

I'm a repeat customer of Mike's for years now, through his ioffer storefront. Always got my downstems from him. Both the 12-slot (low drag) and 12-hole (high diffusion) are great! Prices and quality both through the roof, which I appreciate a ton!

 

[broken_sound]

I'm about to pick up an adapter with a carb, would this:
http://oregonglassblower.com/18-14mm-Glass-Adapter-With-10mm-Carb-18M-14F-18-14-10c.htm

Fit into my current setup of:
http://www.dhgate.com/product/2015-new-glass-faberge-egg-mothership-water/238488989.html
+
http://fuckcombustion.com/threads/the-mighty-by-storz-bickel.16000/page-65#post-736263

 

[MinnBobber]

I'm about to pick up an adapter with a carb, would this:
http://oregonglassblower.com/18-14mm-Glass-Adapter-With-10mm-Carb-18M-14F-18-14-10c.htm

Fit into my current setup of:
http://www.dhgate.com/product/2015-new-glass-faberge-egg-mothership-water/238488989.html
+
http://fuckcombustion.com/threads/the-mighty-by-storz-bickel.16000/page-65#post-736263

.................................................

That should work as starting at the Crafty with welded on 18 - 14 mm male joint:

Then OGB 14 mm Female intake to 18 mm Male:

Fab egg with 18 Female

FYI, @Oregonglassblower pieces are very nicely done

 

[61reissue]

I recently had Mike make a custom mouthpiece for my Colie gridded upline and he nailed exactly what I was looking for. I wanted a MP that you simply put your mouth against. Not in or around. Not an easy thing to find. I also wanted it long enough to where you can hit it and watch it at the same time. It ended up being perfect bar height.
Thanks again, Mike!!

Obligatory milk shot

Awesome! Well except for the Saints part(Falcons Fan)

 

[ragnorak71]

mike made me a replacement much longer mouthpiece ending in a 18mm male joint for my dhgate ufo piece and it is awesome, also grabbed a carbed adaptor and is still the best value for me in uk

 

[MinnBobber]

Here's my newest collection of @Oregonglassblower glass. Very nice job on them.
They allow a lot of experimenting/ coming up with different options.

- mouthpieces: Mike can tweak the length, bend angle, mouthpiece for a custom fit.
- the glass adapters with different angles allow for different options
- the tubing/ whip adapters let you connect to any joint (come in M or Female)

 

[cybrguy]

One of those mouthpiece stems with a US male joint (to fit Venus) is in my future. I wonder if he can do them without reducing the diameter so much? I will probably have him start the bend a little lower to get the piece I am connecting it to (like the UFO) a little further from my face. I think a lower bend may allow more surface to absorb heat (for using with the Zion).
I KNEW I shoulda taken that thermodynamics class in school...

 

[ragnorak71]

I got him to do a mouthpiece for my ufo so i could see it easier. at first i was alarmed by diameter (looked like a drinking straw lol) but now I am used to it and really enjoy it. i got him to do the bend just above the gg joint (just under an inch) works fine

 

[cybrguy]

I got him to do a mouthpiece for my ufo so i could see it easier. at first i was alarmed by diameter (looked like a drinking straw lol) but now I am used to it and really enjoy it. i got him to do the bend just above the gg joint (just under an inch) works fine

Do you have a pic of that? I'd like to see how far it gets you away from the UFO.

 

[ragnorak71]

no pics i am afraid since i have broken nearly all technology near me this week (dont ask)

i came at it from what height i wanted the mp to sit so i knew i wanted a 7 inch height gain, the whole thing is 9inches from the ufo when inserted (insert puns here)

i am a big fan of it have to say, using it atm

 

[Oregonglassblower]

Hey guys i noticed some mention about the diameter of the mouthpiece tubing. My stock ones are 12mm diameter but if needed i can make them 15mm diameter to allow for more flow. Just ask. Thanks!

 

[ragnorak71]

just to clarify, my comments were by no means critical. the diameter of the tubing is obvious in the pics you sent prior Mike and it was just my lack of thought that led to the moment

my biggest plus is you give exactly what is asked for, top service

 

[subway13029]

Man I wish I knew bigger was available..guess gotta order another..lol

 

[cybrguy]

my biggest plus is you give exactly what is asked for, top service

I need to reinforce this thought. You may have read about my joint issue (ISO vs US) that was no fault of OGB, but many vendors would have left me hanging or just offered a refund (or not). Mike went WAY out of his way to make sure I was happy and my issue was resolved and I had what I needed.

There is NOTHING better as a customer than a vendor who cares about customer satisfaction, and Mike does this in a big way. I can't recommend him more highly.

 

[XeroRespect]

Honestly, anything I have thought up, Mike was able to improve on. Does great with the custom orders, and the ground joints are top notch. I just placed my third or fourth custom order today. Quality, fair price, quick shipping and best of all made in the USA.

 

[Oregonglassblower]

Hey everyone. Just a heads up, my art fire store is having problems with listings so if you need anything please use my OGB site http://oregonglassblower.com/ until i get things resolved. Sorry for any inconvenience. Thanks for all the kind words in the last few posts!

 

[CameraNerd]

Im sorry if this is the second time this has been requested...but could you make me an adapter that is a U. one with a male 14 that ends up the width of a drip tip? id like to use it with my cloupor setup.

 

[XeroRespect]

I had @Oregonglassblower make me a custom setup for my Magic Flight Orbiter/Underdog. I wanted a nicer mouthpiece for the whip, and the carbed adapter was a must. I am loving the 10mm plug style. The 14mm Male vape adapter with a shortened stem makes for a flexible hookup. Well done Mike. Excellent work as always. The flat mouthpiece works awesome. Love the 'sip' feeling.

 

[Jaindoh]

TAG 12" Dragless fritted disc w/ OGB 10mm carb (looped plug for convenience) & Exotic Maple Burl e-Nano.

Loving the carb, great stuff as always Mike!