Discontinued Omicron Vaporizer for oils

[sessnet]

Why are people looking for omicron caps?

Load a cart with wax and you have nothing to worry about, don't travel with puregold or oil it always ends up being more work than you think...

Also, the metal mouthpiece or delrin ones are great for keeping the length pocket-able without having to take the cart off.

Because it stinks when I carry it. It must be the silicon tip, or something. The silicon tip is a pain to me because it attracts my pocket lint.

we got caps coming, better caps easier to pull out. wait for it to be online tomorrow with some more items.

Thanks man! Something I can use to cap the cart on the go, I hope! Like your simple m601 cart rubber cap, I guess...

 

[ilovedoobies!]

Ok just got the New V2 and i have these new carts! Problem is they mell really funny when i dry burn it with some smoke coming from the center post/air way I wondering i know the old carts had the mechanical taste but they fixed that but these 2 different carts are smelling the same and i dont wanna fill it with my oil ?!?!?!??!!??!?!? Anyone else having this issue ?

 

[JoeKickass]

Ok just got the New V2 and i have these new carts! Problem is they mell really funny when i dry burn it with some smoke coming from the center post/air way I wondering i know the old carts had the mechanical taste but they fixed that but these 2 different carts are smelling the same and i dont wanna fill it with my oil ?!?!?!??!!??!?!? Anyone else having this issue ?

Until all the testers give the thumbs up, you still need to pre-oxidize the carts yourself. I just vape the oil without inhaling until it goes away, but don't overheat the dry cart since it's easier to burn them out.

 

[ilovedoobies!]

But that taste will make me sick and just smelling it makes me sick so I dont know man

 

[ilovedoobies!]

How many and how long do you oxidize the carts?

 

[ru_frothi]

How many and how long do you oxidize the carts?

Welcome to the thread. There is a ton of good new user info on the Wiki link (click on the omicron link in my sig).

I oxidize mine like many other folks here by loading em and using em. The taste will change quickly.

THC Scientific posted this a week or so back:

"About 5-10 times press each being 3 seconds, and allow it to cool down between presses, about 20 seconds, we are working with a method that will oxidize the heating elements and everything else before it is released, but it has to be implemented into the production after we perfect it."

 

[Bob Loblaw]

we got caps coming, better caps easier to pull out. wait for it to be online tomorrow with some more items.

am exited and hitting the refresh button a little too often over at d9

 

[vishus650]

i finally have a concentrate that WILL NOT hit good no matter what i try to do. all i get is little clouds, disappointed indeed, i might just reclaim and take dabs with it instead.

 

[OF]

i finally have a concentrate that WILL NOT hit good no matter what i try to do. all i get is little clouds, disappointed indeed, i might just reclaim and take dabs with it instead.

Very interesting. Any idea why it won't feed?

OF

 

[JoeKickass]

i finally have a concentrate that WILL NOT hit good no matter what i try to do. all i get is little clouds, disappointed indeed, i might just reclaim and take dabs with it instead.

Is it the concentrate or just the cart getting plugged up? Are you filling a new cart or refilling?

 

[Uce]

@vishus

•I'd watch the amount you put the cart
Maybe like no less then .5..I myself like to put .7

•the temps around you have a part..not to warm so that it
Has a chance to cool down

•ive found when I have a full g in there
It takes a lil longer to prime somtimes
Not all the time.

•I use a lil torch heat up 1/4 top of the cart
(Lightly mind you)

•or you could be sucking way to hard on that thing
And you needa have more patients..

SLLOOWWER pulls get chu what I believe you want


Uce

 

[Uce]

You guys ready for the 7.4v top kits?


Well here it is. You need to have a current v2 kit for it to work. So here is what you get.

1 x 7.4v top. Beefed up water proof top.
1 x Custom bottom cap for 7.4v option
2 x 14250 batteries
1 x Short Omicron Tube ( this will turn the omicron to a short vape, you need original v2 cap )


Cost to be determined in a few days.

@thc

Progress is all I can say
Thank you thc for bringing this option
To my v2....

HOW'S THE NAIL CART COMMING ALONG???!??
Status please boss that's my ticket right there..

 

[hatfieldsmama]

we got caps coming, better caps easier to pull out. wait for it to be online tomorrow with some more items.

!!!!!!!

 

[THC SCIENTIFIC]

!!!!!!!

http://www.delta9vapes.com/products.php?product=White-rubber-Caps

 

[beEasy]

http://www.delta9vapes.com/products.php?product=White-rubber-Caps

So will new carts come with these white caps?

 

[ilovedoobies!]

!!!!!!!

Looks like I'm spending some money!

 

[THC SCIENTIFIC]

So will new carts come with these white caps?

We have a lot of cartridges produced, soon as we run out the next production run will include these tops.

 

[vishus650]

Is it the concentrate or just the cart getting plugged up? Are you filling a new cart or refilling?

it has to be the concentrate, because the cart gets warm, and other carts i have hit like a champ. i think the budder might be too thick?

 

[THC SCIENTIFIC]

it has to be the concentrate, because the cart gets warm, and other carts i have hit like a champ. i think the budder might be too thick?

Whats going on?

 

[vishus650]

@vishus

•I'd watch the amount you put the cart
Maybe like no less then .5..I myself like to put .7

•the temps around you have a part..not to warm so that it
Has a chance to cool down

•ive found when I have a full g in there
It takes a lil longer to prime somtimes
Not all the time.

•I use a lil torch heat up 1/4 top of the cart
(Lightly mind you)

•or you could be sucking way to hard on that thing
And you needa have more patients..

SLLOOWWER pulls get chu what I believe you want


Uce

i've never had issues before, and if i did, in a day or two they were resolved. it has .7 in it, and i;ve heated the cart up to try and melt the concentrate down, and still no luck. i get bigger hits out of my cart with .3 in it than this one.

any one else experience difficulty with a budder?

 

[vishus650]

Whats going on?

i get super weak clouds out of the cart i just filled up on friday. 2.4 ohm cart on a v2, filled with purple cream budder. the cart gets warm so i have no doubt its the concentrate must not be melting completely

 

[THC SCIENTIFIC]

i get super weak clouds out of the cart i just filled up on friday. 2.4 ohm cart on a v2, filled with purple cream budder. the cart gets warm so i have no doubt its the concentrate must not be melting completely

How long are the button holds? do you see the orange glow?

 

[vishus650]

wow wow never mind guys. this shit is crazy, this is the second time i've had an issue with the v2 since i got it, and both times i've waited it out then posted my problem after a couple of days. both times it was the cart not hitting too well. but after posting my problem, the situation seemed to fix itself immediately. i guess the concentrate wasn't melted, maybe there was too much, although it was .7 only in it. its hitting quite well right now...big clouds...but its like this thing has a mind reader and knows when im disappointed in its performance and makes me a believer once a gain, i see the light!

 

[THC SCIENTIFIC]

wow wow never mind guys. this shit is crazy, this is the second time i've had an issue with the v2 since i got it, and both times i've waited it out then posted my problem after a couple of days. both times it was the cart not hitting too well. but after posting my problem, the situation seemed to fix itself immediately. i guess the concentrate wasn't melted, maybe there was too much, although it was .7 only in it. its hitting quite well right now...big clouds...but its like this thing has a mind reader and knows when im disappointed in its performance and makes me a believer once a gain, i see the light!

No problem boss, i think that soon as i am on the case the concentrates just decide to work. I scare the crap out of them?

 

[Silvercloud538]

wow wow never mind guys. this shit is crazy, this is the second time i've had an issue with the v2 since i got it, and both times i've waited it out then posted my problem after a couple of days. both times it was the cart not hitting too well. but after posting my problem, the situation seemed to fix itself immediately. i guess the concentrate wasn't melted, maybe there was too much, although it was .7 only in it. its hitting quite well right now...big clouds...but its like this thing has a mind reader and knows when im disappointed in its performance and makes me a believer once a gain, i see the light!

At least '"zone sensitivity seems to rule"' ,is the bottomline