Discontinued Omicron Vaporizer for oils

Stond_Face

Well-Known Member
the voltage of the battery should be the same when in the unit with very minimal loss.

Now what you can do is check the resistance of the cartridge, are you able to do that?
....

Thank you for replying THC.

I agree, I measured no voltage drop across the head with the button pressed.

My Kiss cartridge measures 1.8Ω 

The fill-up cartridge measures 3.8Ω  (it's a 2.4 cart. But, I must have tried it a million times trying to figure it out)

BTW... My daughter ordered an Omicron Mini along with my recent Kiss Cartridge. So, we loaded the mini and got lung exploding hits. Like I used to get with the original Kiss cart when my Omicron was new. I'm hoping I can get that kind of performance from my Omicron.

Thanks again
D
 
Stond_Face,

eln00b

Active Member
Thank you for replying THC.

I agree, I measured no voltage drop across the head with the button pressed.

My Kiss cartridge measures 1.8Ω 

The fill-up cartridge measures 3.8Ω  (it's a 2.4 cart. But, I must have tried it a million times trying to figure it out)

BTW... My daughter ordered an Omicron Mini along with my recent Kiss Cartridge. So, we loaded the mini and got lung exploding hits. Like I used to get with the original Kiss cart when my Omicron was new. I'm hoping I can get that kind of performance from my Omicron.

Thanks again
D

Hi. Curious..did you try putting any of the cartridges in question on your daughters omicron mini?
 
Last edited:
eln00b,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Thank you for replying THC.

I agree, I measured no voltage drop across the head with the button pressed.

My Kiss cartridge measures 1.8Ω 

The fill-up cartridge measures 3.8Ω  (it's a 2.4 cart. But, I must have tried it a million times trying to figure it out)

BTW... My daughter ordered an Omicron Mini along with my recent Kiss Cartridge. So, we loaded the mini and got lung exploding hits. Like I used to get with the original Kiss cart when my Omicron was new. I'm hoping I can get that kind of performance from my Omicron.

Thanks again
D

Also check the resistance of the leads without the cartridge and minus that from total resistance.
 
THC SCIENTIFIC,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
One a side note we have started production for another client who will be going online soon and will join FC.


They have decided to purchase some of the services we offer.

Which will be

Shipping
Warranty Claims
CS


Now CS will be handled by @SamuraiSam it is email only

And shipping and repairs will be handled by us.

@SamuraiSam will post up their site once it goes live and don't be afraid there manufacturing will be handled by us so expect quality and innovation from them as well since we will be leasing our designs to them.

One thing is their prices will be cheaper since they will have less over head and are online sales only.
 
Last edited:
THC SCIENTIFIC,

Stond_Face

Well-Known Member
Also check the resistance of the leads without the cartridge and minus that from total resistance.

Hi THC SCIENTIFIC

Im sorry for the delay... Life sets the agenda.

Anyway... I sat down to make the measurements you requested, but I don't understand.

Could you please clarify what resistance I should check.

I thought you meant check the resistance between the center terminal that the + side of the battery contacts and the bare metal threads that screw in to the battery holder. This resistance is 0 with either the cartridge installed or removed, and with the button pressed or not pressed. But, I don't think that is what you meant me to do.

Thanks
D
 
Stond_Face,

hashkin

Member
i want to purchase a vape frim w9 but im not sure whic one to go for.

what is the difference between ophos and omicron? also they bith come in lite versions if im not wrong?
 
hashkin,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
actually ive just had a proper look. whats the difference between the ophos and the omicron lite?

the difference is the threads. Omi Lite being a 601 mod style which means flat top, and the Ophos being a 601 ego which means it has a outer ego style thread.
 
THC SCIENTIFIC,

Stond_Face

Well-Known Member
Also check the resistance of the leads without the cartridge and minus that from total resistance.
Hi THC SCIENTIFIC

Im sorry for the delay... Life sets the agenda.

Anyway... I sat down to make the measurements you requested, but I don't understand.

Could you please clarify what resistance I should check.

I thought you meant check the resistance between the center terminal that the + side of the battery contacts and the bare metal threads that screw in to the battery holder. This resistance is 0 with either the cartridge installed or removed, and with the button pressed or not pressed. But, I don't think that is what you meant me to do.

Thanks
D
 
Stond_Face,

THC SCIENTIFIC

To Boldly Go Where No One Has Gone Before
Manufacturer
Hi THC SCIENTIFIC

Im sorry for the delay... Life sets the agenda.

Anyway... I sat down to make the measurements you requested, but I don't understand.

Could you please clarify what resistance I should check.

I thought you meant check the resistance between the center terminal that the + side of the battery contacts and the bare metal threads that screw in to the battery holder. This resistance is 0 with either the cartridge installed or removed, and with the button pressed or not pressed. But, I don't think that is what you meant me to do.

Thanks
D

You would need to check the resistance of the wires that connect to the meter. Then you would recheck the cart resistance and minus the resistance that you got when you tested the wires.
 
THC SCIENTIFIC,

hashkin

Member
okay if i buy the kiss titanium kiss carts, and use my own battery, inhave a dr dabber battery and a vision spinner 2. will the performance be exactly the same as using a omicron light with it? i know your battery maybe of higher quality but will i get the same performance, will they out put the same power?

also if i buy the 7.2v kiss cart, will it work on my 50w istick mod? thanks guys
 
hashkin,

hashkin

Member
okay if i buy the kiss titanium kiss carts, and use my own battery, inhave a dr dabber battery and a vision spinner 2. will the performance be exactly the same as using a omicron light with it? i know your battery maybe of higher quality but will i get the same performance, will they out put the same power?

also if i buy the 7.2v kiss cart, will it work on my 50w istick mod? thanks guys

also whats so special about an omicron or persie? why notuse a regular pen like ophos or omicron mini? in the end they both use the kiss carts.
 
hashkin,

SamuraiSam

Extraction Technician
Ophos and Omicron mini regulate to 3.7V via pulsewidth modulation

Omicron and Persei deliver raw battery voltage, when you use them with good quality batteries like AW that have low internal resistance and high amperage output, they deliver greater performance than the integrated battery vaporizers.
 

hashkin

Member
how about the ophos vs onicron lite? whats the difference?

and which is better the kiss carts or the long extract cartidges? i wanted something that holds more but performance is more important. and of course i want the least amount of wastage.
 
hashkin,

SamuraiSam

Extraction Technician
how about the ophos vs onicron lite? whats the difference?
@hashkin You just asked this question a few days ago on March 31st, and @THC SCIENTIFIC answered you specifically:
the difference is the threads. Omi Lite being a 601 mod style which means flat top, and the Ophos being a 601 ego which means it has a outer ego style thread.

All our devices from the Vaporizer through O-Phos have the same performance, just different capacity batteries. The O-Phos is the only vaporizer in the UP Tech lineup that has 601 Ego threading, all other vaporizers have 601 Mod threading. The O-Phos and Omicron Lite are identical internally, and simply look different, they both have 900mAh batteries.

Better is subjective. To some people, the more conservative cartridge is better, they want something like a CO2 prefill with 100+ hits and they prefer the EO cartridge. To most people, ease of use and flavor are considerations. I always recommend the KISS Globe and KISS Ti coils because it's easier to use than any other cartridge and gets you through the learning curve of draw technique in about five seconds with your first use.

The KISS mini is becoming extremely popular. It's nichrome wire so it won't have the flavor of Ti, but man it's awesome if you want something to use all day and keep in your pocket. I am rocking KISS Mini on my Persei shorty setup and have never been happier on-the-go (well except for I lost my last Omicron HVD and am now devastated)
 
Last edited:

dilvish

in hypno-vision
and which is better the kiss carts or the long extract cartidges? i wanted something that holds more but performance is more important. and of course i want the least amount of wastage.

kiss carts are definitely way better, but hold less. i haven't used one myself, but you should look into the kiss mini. i understand it holds a bit more than the standard kiss carts. note that it is only compatible with the mod style thread (omicron, not ophos).
http://www.w9tech.com/kiss-mini-vaporizer-cartridge/
 
Last edited:
dilvish,

420time

Well-Known Member
One a side note we have started production for another client who will be going online soon and will join FC.


They have decided to purchase some of the services we offer.

Which will be

Shipping
Warranty Claims
CS


Now CS will be handled by @SamuraiSam it is email only

And shipping and repairs will be handled by us.

@SamuraiSam will post up their site once it goes live and don't be afraid there manufacturing will be handled by us so expect quality and innovation from them as well since we will be leasing our designs to them.

One thing is their prices will be cheaper since they will have less over head and are online sales only.

so does this mean there will be the 5pack EO cartridges on their site too? how soon will it be up?? how much cheaper will their products be?
 
420time,

Severmore

Well-Known Member
Guys,
W9Tech again went way above and beyond my expectations. I shipped back a broken Omicron HVD top and placed a small order for a KISS mini and Boro Globe. In return, I received my order, an updated Omicron top with a compressible center pin, plus an extra free KISS cartridge and battery case.

Thank you @THC SCIENTIFIC and @SamuraiSam...you've a customer for life.

3358vfk.jpg
 

hashkin

Member
how does the omicron differ to the ophos/minicrpn,except the battery capacity? is the omicron a vv battery? does it have a dial or something?
 

lucky778

Well-Known Member
I have 2 omnicron HVD heads.

On one of them 95% of the time I get a purple flashing light. Once in a while it will fire blue but It quickly goes purple after 10 secs. This happens on different kiss carts.

On my other one it fires the cart when it gets screwed in. I don't have to press the button and the coil gets hot.

Any ideas?
 
lucky778,
Top Bottom