Discontinued Omicron Vaporizer for oils
- Thread starter THC SCIENTIFIC
- Start date
jaypee2100
Member
@planet vape
I have that 3M carbon fiber vinyl myself and i am having a hard time putting it on... Do you have the exact measurements for how much it takes to roll it around the cone and battery?
everytime i put it on it is crooked >.<
I have that 3M carbon fiber vinyl myself and i am having a hard time putting it on... Do you have the exact measurements for how much it takes to roll it around the cone and battery?
everytime i put it on it is crooked >.<
charliedontsurf
Medical
Great video Vito, everyday I want an Omicron more but will probably wait for flower carts at least, and may wait to see how the Persei evolves.
I am really bummed at what happened at the cup, the only year where we entered and this crap had to happen.
On another note, we are working to get everything fixed and released by January. Yes we are working night and day to push out our flower cartridges, nail cartridges, new redesigned leak proof cartridge, and few other projects we are working on in the hydroponic side.
Happy thanksgiving day everyone lets get this rolling and see what we can do for the new year.
Support
On another note, we are working to get everything fixed and released by January. Yes we are working night and day to push out our flower cartridges, nail cartridges, new redesigned leak proof cartridge, and few other projects we are working on in the hydroponic side.
Happy thanksgiving day everyone lets get this rolling and see what we can do for the new year.
Support
jaypee2100 said:
Hi jaypee2100,
For the battery it is 62mm x 52mm + the part for the end cap and for the cone it is 45mm x 60mm and it requires some steady hands and some skill as the piece is very small and curved. Then you need to trim and get the seams perfect, all without getting any wrinkles.
P.V.
Omg, remember the 707 Headband wax I had a hard time with my first three weeks using my Omicron?.......Well, it is hitting freakin fantastic right now! Soft slow toke was all it needed!
I am really Thankful today for the time I've had and the time I'm going to have with my Omicron!
--tracy
I am really Thankful today for the time I've had and the time I'm going to have with my Omicron!
--tracy
Cali Connection Clones Grown by Thc Scientific ( thats us ) just helped win 3rd place at the cannabis cup for best coffee shop with the Green Place.
Waiting for results on best new product................. This thing is killing me.
Waiting for results on best new product................. This thing is killing me.
OhTheAgony
here for the chicks
I just had a look at your website and noticed the trade-in deal. Cool idea.
Is there a list of requirements or can I send in just any old vape for this deal? & would you happen to have a EU location to ship the trade-in vape to?
Also, I was wondering if I can use my Ego-T batteries with the Omicron cartridges?
Is there a list of requirements or can I send in just any old vape for this deal? & would you happen to have a EU location to ship the trade-in vape to?
Also, I was wondering if I can use my Ego-T batteries with the Omicron cartridges?
imholdinout
The Machinist
THC SCIENTIFIC said:
Been lurking for longer than I would care to admit. Im really leaning towards the omicron. Im sure I just missed it somewhere, but do you have to store it vertically at all times or can you store it horizontally if your oil is thick enough? Does this make priming a regular thing?
imholdinout
The Machinist
Oh ok cool, I wasn't sure being that leak-proof carts are in the works and all.
danm this results thing is killing me. My guys are not responding, and no one knows who won best product.
ru_frothi
Portable Vaporist
TracyLee said:
Yep I have some of that too and it does require a slower pull. The more you use this thing and gain experience you can learn the correct draw technique to maximize each extract.
Most co2's seem kinda of like this where as the nitroOG you can hit it much harder.
glad to hear you've gotten this mastered.
Happy belated thanksgiving
sucks to hear about the cup
I been trolling since page one. Got mine at elemental wellness. Having a hard time priming the blueberry wax from southbay crc. Been doing the prefilled ones from elemental only had one leak and was user error (had white cap on) about to load gush 9 oil 68%. I like the darker oils bigger hits also any one else hit both there's at the same time hehe! Also the bluedream wax from hhcc on tully is the best smelling tasting item I have smoked from any club. And does gold dust work??
VaporNinja
Well-Known Member
I just received my Omi, and I can't believe how hard this thing hit! I took 2 hits, and I'm as high as i would vaped 1, or 2 arizer solo stem! GOOD JOB THC SCIENTIFIC!
I received my Omicron a few days ago and have been having some trouble. It's possible that I have a bad cartomizer. I figured I would post my experience here, in case someone else had this issue and needed an answer. I am using a batch of what I would call Very Quick Wash ISO (30 second or less wash) filtered through two unbleached coffee filters. The ISO and herbs had been in the freezer all day, and the result was some really clean good looking QWISO. I purchased a #3 cake frosting tip from Hobby Lobby and filled it with about .7 grams. I looked through the top hole in the cartridge and did see the element glowing red, so I knew it was working before I filled it. I have been through a full battery and the best I can get is a very very light wispy hit, and only if I cycle the battery through about 10 heat cycles. The oil just doesn't seem to be reaching the element. I read that there is a preheater component to this cartomizer. My uneducated guess is that the preheater is possibly not working since the device has to be cycled so many times in order for the smallest amount of oil to reach the element. Using an entire battery, I have barely used .1 gram of oil. I have no leaks. I have heated the top half of the cartomizer with a lighter to be as sure as I can be that the oil is not just stuck to the sides, and store it upright. Thanks in advance for any advice!
Adobewan
Well-Known Member
@wthanna
Try heating the top half(only) of the cart with your lighter. Hold the bottom of the cart in your hand so you know the bottom isn't getting overheated. Then apply Vito's hot needle technique, heat a pin or thin nail with your lighter and gently slide it down both sides of the cart interior, about 3/4 the way down the cart, and slowly work it back and forth.
Then prime, a couple of times and I bet you're good to go.
Enjoy the weekend all!
Try heating the top half(only) of the cart with your lighter. Hold the bottom of the cart in your hand so you know the bottom isn't getting overheated. Then apply Vito's hot needle technique, heat a pin or thin nail with your lighter and gently slide it down both sides of the cart interior, about 3/4 the way down the cart, and slowly work it back and forth.
Then prime, a couple of times and I bet you're good to go.
Enjoy the weekend all!
ru_frothi
Portable Vaporist
Keak420 said:
The Blueberry Co2 from SouthBay CRC is little harder to prime. Heat the cart on the top with a lighter as outlined here and that should allow it to settle and prime.
hopefully you checked the cart first to make sure its good.
it still took quite a few tries to get that concentrate going.
once you do get it going its strong medicine and generally like a slower pull to get big clouds from it.
Havelock Vetenari
Patrician
You've probably already seen this,but on the off-chance you didn't,they've updated it :THC SCIENTIFIC said:
cannabiscupwinners
Bad luck man,just take solace in the fact,it's not exactly a cup known for it's,ehh let's say,'fairness'.
ya I already saw it.
I dont know how, but a oil vaporizer got beat by a credit card grinder, paper vacuum and a nice goodie bag.
guess no one noticed the fact that our vape just changed the market or the fact we made what others couldnt for 3 years.
ATleast 3rd place for tahoe og, and buddha tahoe aint bad. Forget that im taking 1/3 credit for this two awards.
Guess we know how to grow better then we know how to invent.
I dont know how, but a oil vaporizer got beat by a credit card grinder, paper vacuum and a nice goodie bag.
guess no one noticed the fact that our vape just changed the market or the fact we made what others couldnt for 3 years.
ATleast 3rd place for tahoe og, and buddha tahoe aint bad. Forget that im taking 1/3 credit for this two awards.
Guess we know how to grow better then we know how to invent.