My secret to THC E-Cig PG-Liquid... Potent, Effective, Cheap, Easy!!!

[shark sandwich]

Yeah, I saw people saying here that rosin concentrate can be used in liqweed but they had made the concentrate of nugs, and this video is about making rosin from regular hash.
Just wonder if good hash is also suitable to make rosin concentrate, and then this rosin make into e-juice.

Rosin is perfect for making "liqweed" solution!

The rosin can be pressed from either hash or flowers, both are great. If you enclose the material in a t-sac tea bag, it will keep your rosin clear of any particulates that might clog your atomizer.

I've used Ejmix and Connoisseur Concentrates solutions, and rosin works perfectly with both. If you plan to do some pressing you should check out the rosin thread- it's full of great information.

 

[Grow Goddess]

I'm thinking of going the terpene option instead of using PEG, VG, PG. I'm hoping the viscosity won't be an issue in a tank. Is CC the best option?

Sorry for my ignorance, but I do not even know what CC is. Do you mean concentrated cannabis oil?

I wouldn't bet on the terpene oil, but that is just my opinion.

 

[kingtut106]

Sorry for my ignorance, but I do not even know what CC is. Do you mean concentrated cannabis oil?

I wouldn't bet on the terpene oil, but that is just my opinion.

Connoisseur Concentrates solution

 

[thewhitelotus]

Ive been messing around with Rosin into cartridges for a little bit now. Ive been able to make some decent mixes with Vapeur Extract and DB Pro Mix but not exactly what im looking for.

Im using .5ml cartridges (ive got both plastic duckbilled carts and also the silver tipped glass ones) with your standard 510 thread buttonless battery. Currently doing a 1:1 ratio to ensured a half gram of rosin per cartridge. The issue im running into is I believe the final mixture is a bit too thick for these cartridges....what should be added to thin the mixture?

Also, ive ordered Holy Terp "Jack" and also their "Pure" product so im going to be experimenting with those soon.

 

[JBO]

So I'm about to make a 3rd batch of thc juice with CC and don't want to risk another weird batch. So has anyone tried the microwave method? That is what drew recommended and I'm just a lil nervous about it. Also do you guys add the CC before you melt the concentrate or after? Thanks again!

 

[macbill]

You don't want to evaporate the CC - I place concentrate and CC in a glass vial, and put it in a water bath at 140F to 150F until fully melted and free-flowing , and I stir it with a large paper clip that I have straightened out for a full 5 minutes.

It's probably overkill, but works for me. I usually make a 2 to 3 gram concentrate batch at a time and it lasts me a long while.

 

[Hyphy]

Currently doing a 1:1 ratio to ensured a half gram of rosin per cartridge. The issue im running into is I believe the final mixture is a bit too thick for these cartridges....what should be added to thin the mixture?

PG

 

[JBO]

Thanks macbill, after reading more I'm wondering if I didn't heat it up to much the first time. I'll try your method this time. I'm also gonna try the kangertech cl4.0 tank this time to try and prevent any leakage. Supposed to be kangertechs answer to the cubis.

 

[VAPEHUNTER]

So I'm about to make a 3rd batch of thc juice with CC and don't want to risk another weird batch. So has anyone tried the microwave method? That is what drew recommended and I'm just a lil nervous about it. Also do you guys add the CC before you melt the concentrate or after? Thanks again!

Hey @JBO, take a look here at this method I used, it's super easy and worked great.

I always liked the idea of being stealthy. So when I began looking into the whole "E-juice thing" I quickly found Puff Magic and gave it a try. Right away I didn't care for the taste. Then after reading this thread a few times over I decided to try the C.C.
My brother and I went halves on a 10 pack sample and because I had 1G of "tangerine O.G. crumble" I decided to go with Tangerine, Orange, and three originals flavors.
So far I have tried a half Gram with half of the Tangerine flavored C.C. and was blown away by the smoothness of it. Although it did seem to go quicker than my first 1/2 Gr. mixed with puff magic.

I also liked how easy it is to mix the C.C. Here is how I went about mixing my 1/2 Gr. with Orange C.C. last night.

My starting products

I don't have a scale that would work for weighing out such small amounts so I just sucked up all the solution than counted the drops (32).

I then added (16) drops of C.C. to my half Gr. of concentrate.

I like to just roll it and spin it for about 5 minutes to let it soak in a little.

After it begins to mix a little I get some 130° water in a mug and slowly "stir" it around in the water. It usually takes about 20 minutes and a few refills to get it really good and "melted".

Finally after it's almost completely mixed I then bring my water up to 140° to really get it just right.

I than fill my cart.

HAPPY VAPING!!!

Hope this helps.

 

[JBO]

Great write up VAPEHUNTER, I remember seeing this like 30 pages earlier lol, I appreciate it. I think I've been rushing this to much and need to take my time as well. I'm definitely gonna try yours and macbills recommendations!

 

[JBO]

OK so I just got done mixing another batch or thcjuice and it seems like it came out better but has anyone else seen it leave like a white cloudy ring around the top of the vessel? I did 2 water baths at 130F and mixing it the whole time for about 20 min. The juice seems fine it's pretty viscous and clear so I'm thinking I got it right just don't know about the ring of stuff at the top. Thanks

 

[macbill]

I, too, am making a batch. 2.5 grams concentrate to 1 ml CC and 2 drops of EJmix. Its alchemy. Every batch is slightly different for me.

 

[JBO]

Wow yeah I'd say so ours look way different. I can see where yours has a little stuff at the top of the glass to so I guess it's normal? I'm going to let it sit overnight before I add it to my tank.

 

[macbill]

When you stir, the walls of the vial get smeared. Its just the remains of stirring your solution. I clean my vials in the same alcohol, and, subsequently evap and vape.

 

[JBO]

OK I gotcha. Just making sure it seems right. I lost a lot taking in and out of the tank last time to try and fix it lol.

 

[Hyphy]

has anyone else seen it leave like a white cloudy ring around the top of the vessel?

I had something similar on my first ever batch. What a disaster that was Melty concentrates are one of the stickiest substances on the planet and can make a mess of things super quick. Not positive what caused the cloudy ring for me that time, but I'd guess that the ingredients didn't properly mix together.

Did you add anything cold to the hot when you mixed it all together? Like cold PG or EJ or other to the warmed concentrate? Wild guess, but who knows. I (now) only mix ingredients at the same temps.

My last batch came out really good, recipe is as follows:

1. Drop 1g concentrate into 1/2oz clear boston round bottle and add 3 drops EJMIX.
2. Fill a separate cup with 180F water and place on a coffee heater.
3. Put the bottle into the cup of hot water (double boiler deal)
4. When the concentrate's all melty, stir for ~10s with a mini mixer (walk the mixer up and down the bottle)
5. Add 3mL of warmed PG to the bottle (warm PG in advance using a double boiler style setup)
6. Stir with mixer for ~10 seconds (walk the mixer up and down the bottle)
7. Profit

That mixer is the sh*t and is made for the job. The pole looking attachment has a slit in the end so when it spins it fans out like a weed whacker. I'm sure the vibration from it helps to mix too.

GL

 

[JBO]

No nothing cold added to it, I did stick my concentrate in the freezer for a minute to crack easier, then dumped it into the container. Then I waited about 10 min for it to get back to room temp before I added the CC to it, which was also room temp. And then I did the water baths and mixing, basically the same way all you guys have been. Thanks again for all the help!

 

[Hyphy]

No nothing cold added to it, I did stick my concentrate in the freezer for a minute to crack easier, then dumped it into the container. Then I waited about 10 min for it to get back to room temp before I added the CC to it, which was also room temp. And then I did the water baths and mixing, basically the same way all you guys have been. Thanks again for all the help!

Hmm, maybe try to melt the concentrate before adding (warmed) CC to it?

 

[JBO]

Definitely worth a shot the next time I mix some up. I think I might email Drew from CC to see what he thinks also before I add it to the tank. Here's been pretty good about helping so it's worth a shot too lol

 

[Hyphy]

Cool. Let us know what you find out from Drew.

 

[JBO]

Just emailed him but I figured I might as well post it here, but I'm getting funky results. After letting it sit overnight you can tell it's changed, like all the concentrate has settled at the bottom.

 

[Hyphy]

Yea somethings not right. Thinking back to my bad batch, I used lower quality concentrate. I now winterize first.

Are you using quality concentrate? Since it's not mixing right, maybe risidual waxes/bho/etc are causing issues?

 

[JBO]

Yeah the quality doesn't seem like the best but I've only got one place I can get it from, they took concentrates out of all the dispenseries here in MI. I can't really pick it up by hand without freezing it first. How do you winterize it?

 

[Hyphy]

How do you winterize it?

https://coloradobudblog.com/2014/11/04/how-to-winterizing-bho-dewaxing/

 

[JBO]

Oh wow thanks, definitely a lot more that goes into it. It looks amazing when he's done, that probably is what I gotta do because mine seems pretty waxy to start with and a lot of the videos I watched people could pick it up and break it by hand.