HerbieVonVapster
Well-Known Member
Good ideal on a display case. The vaporbar is getting crowded.
Missed out on those betas the other day Mistvaporizer but will be checking with you when new ones are out.
Last edited:
MVT 2
- Thread starter mistvaporizer
- Start date
Good ideal on a display case. The vaporbar is getting crowded.
Missed out on those betas the other day Mistvaporizer but will be checking with you when new ones are out.
RelaxedNow
Well-Known Member
this is a general post, someone asked for a 19 mm stir tool/collar. I added them to the store.
Hopefully in about a week. Frames and most components are done i expect to start assembly in a few days.
Cut my finger in a stupid shop accident and it slowed me down a bit.
Cut my finger in a stupid shop accident and it slowed me down a bit.
here is the first MVT2 beta, ships on Monday
the other 5 will follow closly behind, hope to ship all by friday.
I sent an email to the person getting this one.
the other 5 will follow closly behind, hope to ship all by friday.
I sent an email to the person getting this one.
Going in the box now but I wanted to show it off some.
I increased the airflow and put the carb hole on the bottom. The video is slow draw with button pulsing, you can see my finger moving. I didn't use the carb at all. This was 100 mg sequoia strawberry and there is a lot left. This is just the first two hits.
The heat shield ended up making the vapor too harsh so I'm not using it. The increased airflow seems to help control temp.
music by Charlie Parker "Don't blame me"
going to announce a pre order on the MVT2. I will sell 20 units at $169 each, I see the final retail at $189.
Includes stem, 3 extra screens, wong and stir kit. I would like to get feedback from a couple beta users before I do the pre order.
I increased the airflow and put the carb hole on the bottom. The video is slow draw with button pulsing, you can see my finger moving. I didn't use the carb at all. This was 100 mg sequoia strawberry and there is a lot left. This is just the first two hits.
The heat shield ended up making the vapor too harsh so I'm not using it. The increased airflow seems to help control temp.
music by Charlie Parker "Don't blame me"
going to announce a pre order on the MVT2. I will sell 20 units at $169 each, I see the final retail at $189.
Includes stem, 3 extra screens, wong and stir kit. I would like to get feedback from a couple beta users before I do the pre order.
RelaxedNow
Well-Known Member
I just realized I’ll be a beta user. I hope I do a good job of evaluating the MVT2. 
One question, @mistvaporizer. If the heat shield makes it too harsh, can it be easily removed?
One question, @mistvaporizer. If the heat shield makes it too harsh, can it be easily removed?
The heat shield has been taken out and I'm using the standard screen above the coil.I just realized I’ll be a beta user. I hope I do a good job of evaluating the MVT2.
One question, @mistvaporizer. If the heat shield makes it too harsh, can it be easily removed?
final 2 MVT2 beta units ship tomorrow.
The major changes are the button, the airflow and the coil configuration.
I increased the airflow and positioned the intake around the perimeter of the coil. This should transfer heat evenly. The intake hole is on the bottom of the unit and can be carbed.
The coil is hotter but the increased air flow offsets that.
I'm happy with the way the MVT2 performs.
We should get some feedback by next week.
The major changes are the button, the airflow and the coil configuration.
I increased the airflow and positioned the intake around the perimeter of the coil. This should transfer heat evenly. The intake hole is on the bottom of the unit and can be carbed.
The coil is hotter but the increased air flow offsets that.
I'm happy with the way the MVT2 performs.
We should get some feedback by next week.
this is the production model of the MVT2, really only one small change from the betas. Normally I would wait for more feedback before I called it prod but I know this design is cranking really nicely. Of course if there are issues with the betas I'll address them.
Fat Freddy
FUCK CANCER TOO !
Nice looking wood! I think some brass screws and screen might spiff up the bottom side a bit...just saying.
.
The screen and screws are stainless steel. Maybe a rim around the screen?
Just checked and the last two units are out for delivery, one to California and one to Washington. Not sure which members they went to but I'm pretty sure they were folks here. Please post when you get them, I'm holding off on announcing the first pre order production batch until there is some feedback. Still I'm really happy with them but I would like a second opinion
Fat Freddy
FUCK CANCER TOO !
Yeah! That would work! Finishing washers around screw heads too, maybe?
Really like the click on the battery cover/lid, btw.
.
Mine just arrived. Can't test it tonight but I'm very impressed with what I see. Great build quality, nice smooth finish, great click on the recessed button, and the battery door is fantastic.
I didn't expect a 14mm wong to be be included but that's perfect. Would it be possible to get one of these in the same wood as the unit? That would look phenomenal.
I think I'm going to like this vapes 14mm stem size a lot for smaller doses.
Airflow is good.
I like the stir tool.
I love that the sliding door can be inserted backwards for safe traveling. Simple and elegant.
It also comes with a little wooden tube that I'm assuming is a loading funnel?
The unit definitely has a woody smell to it, it's quite nice.
Either im typing in the url wrong of the instruction page on the website isn't live.
The screws on the bottom of the unit are... tempting.
I didn't expect a 14mm wong to be be included but that's perfect. Would it be possible to get one of these in the same wood as the unit? That would look phenomenal.
I think I'm going to like this vapes 14mm stem size a lot for smaller doses.
Airflow is good.
I like the stir tool.
I love that the sliding door can be inserted backwards for safe traveling. Simple and elegant.
It also comes with a little wooden tube that I'm assuming is a loading funnel?
The unit definitely has a woody smell to it, it's quite nice.
Either im typing in the url wrong of the instruction page on the website isn't live.
The screws on the bottom of the unit are... tempting.
http://www.mistvaporizer.com/MVT2instructions
the url is case sensitive
wongs were made for me so I would have to order a bunch to get them in bocote. Also not sure if a bocote bowl would give off flavor, bocote does have a unique odor.
The short wood tube is a loading funnel, here is a video
the url is case sensitive
wongs were made for me so I would have to order a bunch to get them in bocote. Also not sure if a bocote bowl would give off flavor, bocote does have a unique odor.
The short wood tube is a loading funnel, here is a video
RelaxedNow
Well-Known Member
Mine arrived today. I’ll offer my thoughts on its operation after I’ve used it a bit more, as I’ve only vaped a total of 3 or 4 draws (so far, so good).
I can say it’s a beautiful vaporizer, and I like the feel of the button....easy to press, but not TOO easy, and there’s no question of whether I’ve pressed it fully or not.
The stainless screws and screen are much less noticeable in person than they are when magnified in the video. Perhaps brass or something would look a little better with the wood, but I’m happy with it as-is.
Using the battery cover as the on/off switch, provides a good indicator of the switch status. (with the OG MVT, I have a tendency to attempt to vape with the switch left in the off position).
First impression is “Nicely done”. Hopefully, I’ll quickly figure it out, and report back with positive results.
I can say it’s a beautiful vaporizer, and I like the feel of the button....easy to press, but not TOO easy, and there’s no question of whether I’ve pressed it fully or not.
The stainless screws and screen are much less noticeable in person than they are when magnified in the video. Perhaps brass or something would look a little better with the wood, but I’m happy with it as-is.
Using the battery cover as the on/off switch, provides a good indicator of the switch status. (with the OG MVT, I have a tendency to attempt to vape with the switch left in the off position).
First impression is “Nicely done”. Hopefully, I’ll quickly figure it out, and report back with positive results.
going to offer the pre order sale today at noon. $169 for the bocote version with delivery in 6 to 8 weeks.
It's on sold a few already. Sale includes MVT2, stem, wong, stir kit and extra screens
It's on sold a few already. Sale includes MVT2, stem, wong, stir kit and extra screens
Last edited:
Did get a chance to try it after all and oh boy is it a tasty, effective vape.
I will say it takes a bit longer of a button press than some of the other unregulated 18650 vapes around. Took me a few tries to get the right button time and draw speed. But once you get it you can produce consistently great hits and the vapor quality is excellent.
I will say it takes a bit longer of a button press than some of the other unregulated 18650 vapes around. Took me a few tries to get the right button time and draw speed. But once you get it you can produce consistently great hits and the vapor quality is excellent.
Last edited:
Pretty similar to the instructions page. Light tamp, preheat, though I prefer a longer pre-heat than 5 seconds, and then a slow draw. First few draws are pretty whispy as the coil heats up.
I find it really easy to overpower the heater with a medium-high draw, and unfortunately even with a LOT (probably too much) pre-heating the heater can still be overpowered.
It could probably benefit from a smaller intake hole.
But this is all from one session, I'll know more with more use.
I find it really easy to overpower the heater with a medium-high draw, and unfortunately even with a LOT (probably too much) pre-heating the heater can still be overpowered.
It could probably benefit from a smaller intake hole.
But this is all from one session, I'll know more with more use.
If you need a blast of heat put a finger over the carb hole
Tetrahydro Bro
Stoned Kiwi
.