Log Vape Glass Suggestions
- Thread starter MileHigh
- Start date
minnesnowta
Vaporist/Glass Head
Most people go with a 100ml ehle. You wont want anything much bigger just because it doesn't suit them very well. The smaller the better almost. Small bubblers are an option as well
Ash
vaporist
I've never seen anything shorter than about 9" tall with a GONG connection, though I'm no expert. The PD stems fit my 14.4 joint perfectly ( I have a 10" Delta9 beaker). Though, if anyone has had succes connecting a bubbler to their PD or MZ I'd love too hear about it. Pics would be great, too.
I've cleaned out the bong and forbidden any combustion, but my wife misses the smoke and I'm now back in the market for glass. I'd like to re-dedicate the Delta9 for combustion and get a slightly smaller straight tube for vapor. I'd also be using it with my vaporstar. The Ehle is an option, but that can't be the only thing out there.
I've cleaned out the bong and forbidden any combustion, but my wife misses the smoke and I'm now back in the market for glass. I'd like to re-dedicate the Delta9 for combustion and get a slightly smaller straight tube for vapor. I'd also be using it with my vaporstar. The Ehle is an option, but that can't be the only thing out there.
Happycamper
Sweet Dreams Babycakes
I just got my EHLE this morning, and I really like it. Works very nicely. Haven't quite managed to bring myself to drink the water yet like some people say they do.
minnesnowta
Vaporist/Glass Head
Roor makes a 100ml as well but it's three times the price just because it says roor on it. Anything with a 14.5mm gong joint or a 12mm grommet will work with stems. Well with pd stems for sure I'm not sure what the OD is on the others. If you look at grommets you may be able to find more small volume peices but they'll be lower quality.
DevoTheStrange
Ia! Ia! Vapor Fthagn!
It tastes like herb flavored water, quite tasty and refreshing...Happycamper said:
hunterthompson
Active Member
At the request of Rick I would like to introduce the RockZap Glass Thread!
Post here any pieces you feel would work well with your RZs or questions you have about the glass or anything else relating to glass and RZs! Videos of RZs being used through glass are always loved as well
For starters, what do you all think of this piece:
http://www.everyonedoesit.com/online_headshop/Black_Leaf_Ball_Diffuser_Bong.cfm?iProductID=7914
It's got a diffuser and looks like it can be used with very low water levels. The only problem I can see is that the bowl might not be removable (hence the carb) in which case it would not work well.
Modnote: Merged so all log vape owners can benefit and contribute.
Post here any pieces you feel would work well with your RZs or questions you have about the glass or anything else relating to glass and RZs! Videos of RZs being used through glass are always loved as well
For starters, what do you all think of this piece:
http://www.everyonedoesit.com/online_headshop/Black_Leaf_Ball_Diffuser_Bong.cfm?iProductID=7914
It's got a diffuser and looks like it can be used with very low water levels. The only problem I can see is that the bowl might not be removable (hence the carb) in which case it would not work well.
Modnote: Merged so all log vape owners can benefit and contribute.
hereatlast
Well-Known Member
That may provide a satisfying hit but its not (relatively) quality glass. Thin glass, poor welding/connections and less than optimal performance would be expected from most Black Leaf products IMO. These comments aren't to suggest that that won't make bubbles with your RZ though!
hunterthompson
Active Member
So would you say an 100 mL EHLE would be better? It isn't diffused, is bigger, has more water, and is slightly more expensive (but that isn't really a problem at all). I understand tha tthe glass quality would be far better though.
hereatlast
Well-Known Member
The Ehle's are popular around here for good reason(s), largely: quality and price. I would say that yes, the 100ml Ehle would be better (in terms of quality, I think it would be objectively better with regards to glass quality, quality of joints, workmanship in general etc.). The Ehle's are well-built for the price, not the thickest glass around but at under $100 that's hard to beat. Other options include HVY, SSFG, RXI, etc. Looking for straight tubes puts you in a buyer's market IME.
You could buy a diffused downstem if you're after a less chuggy, "smoother" hit...its more than worth it IMO. The benefit is not only diffusion (a buzzword which always seem to get people's heartbeats racing) but an easier pull. The Ehle diffused downstems allow you to displace air (vapor) easier than the stock downstem, the reasons for this are pretty clear.
Size is obviously a preferential thing but I think you'd be more than happy with that size; that is, I don't think it would be too big (FWIW, I use my PD with a few pieces that clock in considerably larger than the 100ml Ehle). If the price isn't an issue, the Ehle over the Black Leaf would be a no-brainer for me. That said, if price isn't an issue at all, its onwards and upwards!
(Some praise to the mods for merging these threads, makes sense IMO.)
You could buy a diffused downstem if you're after a less chuggy, "smoother" hit...its more than worth it IMO. The benefit is not only diffusion (a buzzword which always seem to get people's heartbeats racing) but an easier pull. The Ehle diffused downstems allow you to displace air (vapor) easier than the stock downstem, the reasons for this are pretty clear.
Size is obviously a preferential thing but I think you'd be more than happy with that size; that is, I don't think it would be too big (FWIW, I use my PD with a few pieces that clock in considerably larger than the 100ml Ehle). If the price isn't an issue, the Ehle over the Black Leaf would be a no-brainer for me. That said, if price isn't an issue at all, its onwards and upwards!
(Some praise to the mods for merging these threads, makes sense IMO.)
SD_haze
Well-Known Member
Definitely wouldn't recommend black leaf water pipe.
And nor would i reccomend everyonedoesit.com if you aren't in europe
I highly recommend this
blown in california, german (hand punched) diffused downstem, and the downstem is also a 14--18 upsizer, so standard size bowls fit in it but theres even better airflow.
if you live in california you can go to their shop and get one free shipping, thats what I did (and got $5 knocked off without a bowl but they arent supposed to do that
)
And nor would i reccomend everyonedoesit.com if you aren't in europe
I highly recommend this
blown in california, german (hand punched) diffused downstem, and the downstem is also a 14--18 upsizer, so standard size bowls fit in it but theres even better airflow.
if you live in california you can go to their shop and get one free shipping, thats what I did (and got $5 knocked off without a bowl but they arent supposed to do that
)
Nycdeisel
Well-Known Member
The glass pieces that I found worked best with the log vapes were my ssfg straight tube(simple as hell, many other straight shooters like it) and my newest BC bub. the airflow on both seemed to go really well with the logs and get the milkiest, easiest hits.
small pieces with easy airflow seem to allow the best hits for vaporbonging with log types
small pieces with easy airflow seem to allow the best hits for vaporbonging with log types
PurpleDazed
Well-Known Member
I would like to have a bubbler with 14mm gog joint where the bowl is level with no angle Nice perc, and a carb hole so you dont have to lift the vape w/ stem off to clear the pipe.
A bubbler Like This this style would go very nicely with My newest Log vape an Oak Ceramic RockZap gripper model so if anyone can suggest something similar but with a 14mm joint and a carb hole, Let a fellow vapor enthusiast know. post it.
What im using now is a Bubble style tube with a 45deg angled 14mm GoG joint and it can not sit on its own with the vape on it without tipping over. thats why I think the one in the link above would fit like a glove with log vapes but with a 14mm joint not an 18mm and a carb hole at least 1/4 inch above the water line would be nice.
A bubbler Like This this style would go very nicely with My newest Log vape an Oak Ceramic RockZap gripper model so if anyone can suggest something similar but with a 14mm joint and a carb hole, Let a fellow vapor enthusiast know. post it.
What im using now is a Bubble style tube with a 45deg angled 14mm GoG joint and it can not sit on its own with the vape on it without tipping over. thats why I think the one in the link above would fit like a glove with log vapes but with a 14mm joint not an 18mm and a carb hole at least 1/4 inch above the water line would be nice.
PurpleDazed
Well-Known Member
Here is the pic incase they sell it and take down the pic
With A piece like this you need a 18/14 reducer to use the Stems of most log vapes
I liked this piece also
This adapter is needed to reduce joint from 18mm to 14mm for stems
These are some sweet pieces but without a carb you need to pull the stem to clear it. Thats why I would like to see a carb about 1/2 inch above water line so you dont need to pull the stem off to clear Just remove the finger blocking the hole and its clear and you set it down with stem and vape attached ready for next hit. I got a nice 14mm taperd GonG shortie glass tube that I purchased with My toastie top would work nicely with this style glass. with a carb and 14mm joint.
With A piece like this you need a 18/14 reducer to use the Stems of most log vapes
I liked this piece also
This adapter is needed to reduce joint from 18mm to 14mm for stems
These are some sweet pieces but without a carb you need to pull the stem to clear it. Thats why I would like to see a carb about 1/2 inch above water line so you dont need to pull the stem off to clear Just remove the finger blocking the hole and its clear and you set it down with stem and vape attached ready for next hit. I got a nice 14mm taperd GonG shortie glass tube that I purchased with My toastie top would work nicely with this style glass. with a carb and 14mm joint.
hunterthompson
Active Member
Purple, the link I posted above actually meets all your criteria. It has a 14 mm joint, diffused downstem, and a carb. The only problem is it's black leaf so the glass quality is most likely very poor. It's vey cheap though so it might be worth trying.
Here's the link: http://www.everyonedoesit.com/online_headshop/Black_Leaf_Ball_Diffuser_Bong.cfm?iProductID=7914
Here's the link: http://www.everyonedoesit.com/online_headshop/Black_Leaf_Ball_Diffuser_Bong.cfm?iProductID=7914
PurpleDazed
Well-Known Member
I saw the item but it didnt ring my bell so to speak. For the $ it might be worth it but its out of stock and who knows how long if its back in stock.hunterthompson said:
I went out and made the rounds to the Local Head Shops in my area and found one with a zob like the one pictured but with a red and black label insted of the shown rasta label
Uploaded with ImageShack.us
Well I found it less expensive locally compared to ALT.
Time to see if it hits like I think it should...
hereatlast
Well-Known Member
Hmmm, how should it hit? 
Interested to hear your report, looks like it fits the bill.
Interested to hear your report, looks like it fits the bill.
PurpleDazed
Well-Known Member
hereatlast said:Hmmm, how should it hit?
Interested to hear your report, looks like it fits the bill.
It is a nice Bubbler and I am new to this style bubbler
It takes some lung power to get it bubbling but once your getting the bubbles growing I cleard the pipe and Wow I havent coughed like that in quite some time. I find its better to loosly pack the stems since the stem sits up there is no worry of anything falling back into the Zap but wow I am toasting a stem on a long single pull. I like it, but as with anything new I need to try different ways and figure what works best.
this is similar to what I was using on my log vapes the only difference is the bottom is bubble shaped not beaker shaped.
I tried doing a long single pull with this one and it hits alot easier than the Zob. the thick wide tube makes it easier on my lungs to do the Long Pull.
steiner666
Serial vapist
Any tube that's about 12" or smaller or bubbler really. I'm really happy with how my 250ml EHLE tube+diffuser work with my zap. I definitely wouldnt want anything bigger.
I was also thinking about picking up a cheaper showerhead bub like this one
theyre only $100 on kulture, but would need a 18>14mm reducer.
I think that I'll just stick with my tube tho because I like to clean my glass compulsively and thoroughly, and a straight tube with removable downstem is definitely much easier. So even if i got the bub i could see myself using the tube mainly still. PLus i think its just easier to use with a log vape than the bub probably would be, cause the log isnt right in your face.
I was also thinking about picking up a cheaper showerhead bub like this one
theyre only $100 on kulture, but would need a 18>14mm reducer.
I think that I'll just stick with my tube tho because I like to clean my glass compulsively and thoroughly, and a straight tube with removable downstem is definitely much easier. So even if i got the bub i could see myself using the tube mainly still. PLus i think its just easier to use with a log vape than the bub probably would be, cause the log isnt right in your face.
OhTheAgony
here for the chicks
Nice find, I didn't know there are 100$ bubblers.
They have that one in 14mm as well: click
I really like this one except for the logo: click again
They have that one in 14mm as well: click
I really like this one except for the logo: click again
Auralis
Well-Known Member
Does anyone know of anyone who sells Hydra Tubes like the ones Clear-Dome was selling back in December? I would love something I could fill with water that goes on top of the Zap. If there is nowhere these can be found I will likely go for something like the HVY Mini-Beaker but I think the Hydra Tube style is by far the best.