JarHead design

[jarhead]

The JarHead Design

The design of the JarHead is simple. Halogen bulb technology is employed and controlled though a software algorithm to create a user defined flower vaporization experience. This includes cannabis and hemp flower.

The JarHead comes in three body styles Retro, Pyramid and Box. The Pyramid and Box bodies are similar because they involve 3D printing, which typically takes 9+ hours to print per unit. Both styles have a wood deck(top) and or base(bottom) to complete the housing design. The Retro design is fabricated out of wood and painted. All styles use a proprietary electronic circuit design with a three-button user interface for easy use. The system is viewed through a multi-line LCD display.

JarHead units come in three Jar sizes allowing for single and multi-user configurations. Units come with Hookah piping for vapor extraction, which when coupled with individual user tips provide a social experience with an added layer of safety.

JarHead’s heating stack is made from copper. Many from the early school of vaping would take issue with the use of copper. Copper, as an element exhibits hazardous fumes while burned or burning. However, the operating temperature range of the JarHead (150F- 450F) is significantly less than the required flame-based heating temperature of +2000F to burn copper and create fumes. For this reason, the JarHead is safe to use and does not pose any health concerns when used correctly.

Using the JarHead is healthier than smoking and allows the user to maximize their cannabis flower investment. The JarHead lets a person enjoy their flower more while using less of it. This means a JarHead will pay for itself in a short time.

JarVapor.com

 

[lazylathe]

@jarhead

This reminds me of the old soldering iron vapes from back in the day!

As is customary on FC, will you be able to supply swim images of how it all goes together and what types of materials to where?
I see a lot of copper tubing and something coming from the side of your heater stack.

Hope you can share more!

 

[Custom Flower Hardware]

The JarHead Design

The design of the JarHead is simple. Halogen bulb technology is employed and controlled though a software algorithm to create a user defined flower vaporization experience. This includes cannabis and hemp flower.

The JarHead comes in three body styles Retro, Pyramid and Box. The Pyramid and Box bodies are similar because they involve 3D printing, which typically takes 9+ hours to print per unit. Both styles have a wood deck(top) and or base(bottom) to complete the housing design. The Retro design is fabricated out of wood and painted. All styles use a proprietary electronic circuit design with a three-button user interface for easy use. The system is viewed through a multi-line LCD display.

JarHead units come in three Jar sizes allowing for single and multi-user configurations. Units come with Hookah piping for vapor extraction, which when coupled with individual user tips provide a social experience with an added layer of safety.

JarHead’s heating stack is made from copper. Many from the early school of vaping would take issue with the use of copper. Copper, as an element exhibits hazardous fumes while burned or burning. However, the operating temperature range of the JarHead (150F- 450F) is significantly less than the required flame-based heating temperature of +2000F to burn copper and create fumes. For this reason, the JarHead is safe to use and does not pose any health concerns when used correctly.

Using the JarHead is healthier than smoking and allows the user to maximize their cannabis flower investment. The JarHead lets a person enjoy their flower more while using less of it. This means a JarHead will pay for itself in a short time.

JarVapor.com

I have one. It kicks ass!

 

[Shit Snacks]

Old school style is pretty fun, you could see using this in the '90s for sure! where's the time machine? Seriously that looks like an XL Venus Helios with more going on

 

[Custom Flower Hardware]

This unit is available should be moved to the released section.

 

[Grass Yes]

I think main problem is that @jarhead needs to agree to the vendor rules, before we hear more from them.

Although I suppose it could be moved over anyway. Assuming someone already reported it to be moved.

 

[jarhead]

@jarhead

This reminds me of the old soldering iron vapes from back in the day!

As is customary on FC, will you be able to supply swim images of how it all goes together and what types of materials to where?
I see a lot of copper tubing and something coming from the side of your heater stack.

Hope you can share more!

Hi

I would like to direct you to our website for more information.

JarVapor.com

Thanks

J

Old school style is pretty fun, you could see using this in the '90s for sure! where's the time machine? Seriously that looks like an XL Venus Helios with more going on

I have one. It kicks ass!

Thanks Mr ShayWhiteGrow

 

[lazylathe]

Hi

I would like to direct you to our website for more information.

JarVapor.com

Thanks

J

I was asking for pictures of the internals because your website does not provide any.
Like type of connections used, lightbulbs holder, isolation from electronics...

 

[jarhead]

I do not have any internal pictures that would not be considered proprietary.

Thanks for your inquiry

JarVapor

 

[feralcomprehension]

I do not have any internal pictures that would not be considered proprietary.

Thanks for your inquiry

JarVapor

Kthanxbye

 

[staircase slight of hand]

I do not have any internal pictures that would not be considered proprietary.

Are you able to verbally describe the manner in which the electronics are isolated from the heat/air-path? I’m not trying to give you a hard time, I just know that “trust me it’s safe” isn’t really going to reassure most of your audience here.

 

[RustyOldNail]

I look at my lungs as “considered proprietary”, I’m OUT….

 

[staircase slight of hand]

@ShayWhiteGrow, since you’re the only one here who has one on hand, are you able to tell is anything about the air-path and its relation to the electronics? Assuming @jarhead didn’t make you sign an NDA just to purchase one…

 

[Custom Flower Hardware]

@ShayWhiteGrow, since you’re the only one here who has one on hand, are you able to tell is anything about the air-path and its relation to the electronics? Assuming @jarhead didn’t make you sign an NDA just to purchase one…

I'll hook it up Friday and vid it for yous so you can see the form/function. Pretty badass!

 

[Custom Flower Hardware]

Top notch company, owner, and product gang!

Video Unavailable

This video is unavailable.

streamable.com

Video Unavailable

This video is unavailable.

streamable.com

Edit: shit did I just pull off a back in the day vape critic look?

 

[Zow237]

@ShayWhiteGrow whats the airflow like? looks like you are fighting against quite a bit of resistance in the video? Or is it because you have so much herb in that chamber? hahaha thanks!

 

[Custom Flower Hardware]

@ShayWhiteGrow whats the airflow like? looks like you are fighting against quite a bit of resistance in the video? Or is it because you have so much herb in that chamber? hahaha thanks!

It's the herb plus 5 foot hose and open airflow. Hard to get giant concentrated rips because that jar holds more them me lungs do basically open from jar through hose but .7 take a sec to heat the load first 2, all terps!

 

[Zow237]

I do not have any internal pictures that would not be considered proprietary.

Thanks for your inquiry

JarVapor

Care to elaborate on the materials used internally?

It's the herb plus 5 foot hose and open airflow. Hard to get giant concentrated rips because that jar holds more them me lungs do basically open from jar through hose but .7 take a sec to heat the load first 2, all terps!

Ok yeah I was thinking all that after I asked. I am very interested in this but would def like to know what going on in the air path

 

[Custom Flower Hardware]

Care to elaborate on the materials used internally?

Ok yeah I was thinking all that after I asked. I am very interested in this but would def like to know what going on in the air path

Copper but not hot enough to matter with off gassing the wires inside are all encased and the path travels up the tube, hits the halogen, which is 2mm below that bowl

 

[Zow237]

Copper but not hot enough to matter with off gassing the wires inside are all encased and the path travels up the tube, hits the halogen, which is 2mm above that bowl

Appreciate you brother

 

[dude_de]

I do not have any internal pictures that would not be considered proprietary.

Yay. Let me translate this. "Don't ask me uncomfortable questions. Just trust me and buy my overpriced shit."

I mean, if you ever sell more than a handful of these, it's only a matter of time until someone opens it up and posts pictures.

Your "go away" reply, however, will be something like your legacy here.

 

[Ramahs]

Yay. Let me translate this. "Don't ask me uncomfortable questions. Just trust me and buy my overpriced shit."

I mean, if you ever sell more than a handful of these, it's only a matter of time until someone opens it up and posts pictures.

Your "go away" reply, however, will be something like your legacy here.

Maybe they're waiting for a patent to come through or something, before they can show more.