I've been researching ball vapes for a while now. Definitely want to get one. My only dilemma is the wireless ones aren't battery powered and I don't really want a desktop setup. Basically what I am looking for is the heater and electronics are all built in with the head. Not even sure a product like this exists yet. If my description sounds confusing I can draw out what I'm meaning
-
SCAM WARNING! See how this scam works in Classifieds.
Is there a truly wireless ball vape that has a rechargeable battery
- Thread starter ian moone
- Start date
chillAtGVC
Well-Known Member
The Angus Enhanced uses a halogen bulb to heat a thermal mass of ruby balls. Not sure if that is what you are looking for or not.
No, I know what that device is and not one I'm interested in. I know my description sucks so here is probably an even crappier crude drawing explaining it. The plugs in via USB type c is how it would charge. It would have a built in battery.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
This does not exist currently, you're still looking at two separate pieces of hardware, for the heating element, and then the power source... Plus a bowl of course and a pathway, so four parts at least I think
That's what I was thinking. Thank you.
TangibleHangnail
Well-Known Member
Will that really be portable? Long heat retention is a difficult challenge
If you can build it you'll find the shortcomings quick enough, but I think the do-it-yourself part of our community always leads the way.
I would not think a battery ball vape like that would have much of an advantage of portability, simply because you'll still want a glass piece, etc. So for at home use there is really not a disadvantage to a nice base station.
I have seen a lot of clever small, portable PID controllers, but they are not built into the handle like that. I hope you invent something cool. Good luck!
I would not think a battery ball vape like that would have much of an advantage of portability, simply because you'll still want a glass piece, etc. So for at home use there is really not a disadvantage to a nice base station.
I have seen a lot of clever small, portable PID controllers, but they are not built into the handle like that. I hope you invent something cool. Good luck!
Thanks. I always try to think of the movie field of dreams if you build it they will come. I do agree with what you're saying it's not really about portability as much as it's about I just really dislike cords.
I think you will find that's basically exactly what a wireless ball vape is like. Not portable, but no cords. Obviously trying one is expensive if you don't have a local friend with one, but I suspect it will check your boxes.
I saw someone using one just like this on Instagram, no idea what it was called though.
Main issue is you’re going to be constantly fighting battery issues unless it just lives on the charger, as dry herb vaping is an absolute energy hog, even more so with a high mass ball heater design.
jungpunk420
Well-Known Member
Cannabis Hardware built a PID that runs on a drill battery. I have the DeWalt version. It still has a cord but the power unit is wireless! 
Timps27
Feel like I’m winnin’ when I’m losin’ again
The NEO was kind of close to what you’re looking for. I always wanted to add one to my kit, unfortunately they are discontinued.
Discontinued - The NEO by Prrl Labs
Hey, all! I’m starting a new thread for our new product, the NEO… we’re getting ready to launch a pre-order campaign in just a few days with a planned delivery date by Thanksgiving. So, I wanted to tell you a bit about it, and get your initial thoughts and questions. The NEO acts more like a...
fuckcombustion.com
Love my neo. It's definitely a great device, but performs less like a ball vape than anything that I own. Very gentle heater that requires a good technique. Pays off with flavor in spades.The NEO was kind of close to what you’re looking for. I always wanted to add one to my kit, unfortunately they are discontinued.
Discontinued - The NEO by Prrl Labs
Hey, all! I’m starting a new thread for our new product, the NEO… we’re getting ready to launch a pre-order campaign in just a few days with a planned delivery date by Thanksgiving. So, I wanted to tell you a bit about it, and get your initial thoughts and questions. The NEO acts more like a...fuckcombustion.com
TangibleHangnail
Well-Known Member
CouchLog checks a lot of the boxes. There's a DIY battery option too
Dougmeister20
Active Member
Ive always thought you can just get one of those battery packs and use those to power it. For a slimmer setup only one I've seen was powered by a Dewalt battery.
True, you can run most vapes powered with a VVPS off of a mod, or with a USB power supply.
I have done this with various logs, my Zenith, Atlas, Halo, and HLT. I found it more trouble than it was worth ultimately and I just plugged in to the wall. The issue is the cord to the mod or battery pack, to be honest.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Zenith actually has the connector so you can run it off power from a mod box, tethered with a cord but still viable and way better than a G43 in my experience and likely less annoying than using a battery sled
Orvaxxx
Well-Known Member
Beedles on Instagram: "3 bowls in 3 minutes! 😅 Testing the Canniball to see how much you can get out of a single heat cycle with a full timer. This rig is a prototype for the Vices Glass range! Stay tuned for more 🤙"
74 likes, 20 comments - beedles__ on May 10, 2025: "3 bowls in 3 minutes! 😅 Testing the Canniball to see how much you can get out of a single heat cycle with a full timer. This rig is a prototype for the Vices Glass range! Stay tuned for more 🤙".
www.instagram.com
btka
Well-Known Member
I’ve been working on such a new portable vaporizer project for about a year now, countless prototypes, lots of energy, and a bit of obsession have gone into this! The vape is designed for micro to small sessions (0.05–0.2 g), super modular, and focused on performance and flavor.
I’m excited to finally open a thread and discuss the project in detail, maybe even show some behind the scenes shots. Stay tuned!
I’m excited to finally open a thread and discuss the project in detail, maybe even show some behind the scenes shots. Stay tuned!
Cheebsy
Fermentation Fiend
You should check out @highvaper project. It's basically a DIY pid made with a raspberry pi. In it's original form it's an all glass double flow type design but you could easily wrap a coil around a different head, or make a ball head from lab supplies. It does however run off 4 18650s (or a desktop psu like an led driver or similar) so it wouldn't be quite as compact as your drawing. I believe he has kits available if you fancy trying to make it! It's a fantastic little device that deserves some love!
Unregulated simple all glass vape
Inspired by work on the regulated version on this thread https://fuckcombustion.com/threads/bakx-heating-principle-inspired-desktop-vape.54964/ I was messing about with some test tubes and 4mm nichrome and came up with a very simple unregulated design which works very very well - took me under...
fuckcombustion.com