Introducing the new Vapor Genie Concentrate Pad

[Flotsam]

<not sure why i can't edit my own last post>
Anyway did want to mention to anyone who wishes to file off material from the VG pad like i modified that it is a good idea to thoroughly wash the pad with water and then torch dry. You don't want to potentially breathe in any dust particles from the project that you create.

 

[maremaresing]

Thanks for all the test results @Flotsam ! I really appreciate the lobo test. I was curious to try it in my lobo soon but holding off. I know that the pad is specifically designed not to leak and get inside electronic devices, but I'm still sketched out on devices without a cleanable airpath.

One thing I haven't seen in the thread in device compatibility is the BFG Dani. Mine have been gathering dust since I got the BFG Fusion 2.0, so I'm absolutely thrilled to find they are a *perfect* fit in both the V2 and V3 bowls. Perfect fit as in an exact fit with no room to spare, but a fit. Now I can put them back into service.

My results with the larger size in the lotus were meh, but these work splendidly in the Dani. All that overpowered hybrid heating and thermal mass ensures great results. Not a lot of exhaled vapor each time but I wasn't filling the cups all the way since I have the tolerance of a field mouse.

 

[80Sixed]

Just ordered, excited to put through the wringer!

 

[VaporGenie]

So to complete my evaluation of the Vapor Genie VG concentrate Pad i completed two other steps.

1. I tried the pads inside the Dosing Capsule for my POTV Lobo
2. I took my spare pad and reduced the size of the pad so it would fit inside the chambers of a Dynavap. (8 mm)


So the test on the POTV Lobo was without drama. The small pad fit nicely inside a dosing capsule without issue. I did try the VG pad and then tried the Stainless Steel mesh pad inside a dosing capsule. I would say i prefer the VG pad as it is much cleaner. The SS pad was a bit messier IMO. Both hit pretty well so no issue there. So i give the advantage to the VG product since the wax didn't migrate all over the dosing capsule. So everything just worked, and i don't think i even bothered taking a photo of this setup.

Using the VG pads with the Dynavap M7 was a little bit more involved. The 11 mm pad had to be filed down to get it to fit inside the Dynavap's 8 mm chamber. This photo shows how everything fit after i filed it down. Note the half bastard file that is sitting below.

So the verdict is that the VG pad worked fine with pad, Concentrate stayed in place. With a bit of heating all concentrate on the pad was quickly consumed. I don't have a Dynacoil product but this worked quite well. So if you had some concentrate you wanted to consume and all you had was a Dynavap it will work fine!!

and sure enough the VG pad can be torched clean. Will keep this modified pad with my Dynavap gear waiting to get used again.

Thanks so much for your feedback!

I received my order a few days ago, and at the time I quickly ran one of the 11mm with a Phase 3 ZX bowl and left it there pending more time. Today while reading this thread I decided to get the 11 mm fit in most of DV style vape bowls. I started slowly trimming the edges and was almost there when I got excited, lost focus and went a bit too far in the trimming. So I just tried some rosin - we got some good ones these days in Canada, in a TA bowl and Stunner cap, Forge IH at 4650J@100%. Very tasty and lasting taste over several hits - one heat cycle. I knew I would need more but the system would not allow me to order. I will check with VaporGenie so I can get a couple more that i can trim to a better fit with my DV style vapes' bowls, unless there is a plan to make available soon such size, and it seems there is a demand. Any ways sorry for the long talk, but congratulations and thank you @VaporGenie for this great product, I like it so far and look forward to experimenting with compatible concentrates. I lost faith in finding the effective, no fuss no mess experience for concentrates and I am really excited about this clean solution.

Thanks so much for the testing and kind words! We had some issues with ordering, but the problem is fixed! We will be coming out with different sizes in future!

Are you still doing your promotion? I tried on your website you included and the email attached to it is invalid. And won't go through if I try to make the purchase

Has some issues with shipping but got it resolved, website is in full working ordrer! Thank you for your patience!

I have more testing to do, but I did enjoy using a pad in my Mighty and I think these would be a great replacement for the Prrl Labs concentrate Pads since they are no longer in business and the pads for the Neo aren't reusable.

Since I don't have a firebrick, I cleaned the pads in a Pyrex dish before first use with a small torch and that seems to be a great option, the glass got hot, but nothing it couldn't handle.

I have included some pictures of how the pads fit in some of the vaporizers/stems/accessories I have and have a list below:

Prrl Neo Terp surfer and Purr Glass bowl -
large fits
TM2 - small fits
Mighty - large fits
Heat Island - small fits, but screen can affect how it sits
Bakx- small doesn't fit
Tornado- small kind of fits. Can go in sideways, but not flat
Anvil - XL bowl, small doesn't fit
Dani Fusion - small doesn't fit
Sticky Brick OG - large fits

https://imgur.com/a/CX1yfKF

Thank you so much for this! <3 And glad you like the pads!

Thanks for all the test results @Flotsam ! I really appreciate the lobo test. I was curious to try it in my lobo soon but holding off. I know that the pad is specifically designed not to leak and get inside electronic devices, but I'm still sketched out on devices without a cleanable airpath.

One thing I haven't seen in the thread in device compatibility is the BFG Dani. Mine have been gathering dust since I got the BFG Fusion 2.0, so I'm absolutely thrilled to find they are a *perfect* fit in both the V2 and V3 bowls. Perfect fit as in an exact fit with no room to spare, but a fit. Now I can put them back into service.

My results with the larger size in the lotus were meh, but these work splendidly in the Dani. All that overpowered hybrid heating and thermal mass ensures great results. Not a lot of exhaled vapor each time but I wasn't filling the cups all the way since I have the tolerance of a field mouse.

Thank you so much for your input!

 

[Flotsam]

Thanks so much for your feedback!

Thanks Vapor Genie for sending those to me in the first place. So i was going to ask if there were plans to offer a 8 mm size in addition to the 11 & 13.3? I like the idea of doing concentrates in my Dynavap and similar devices pretty easily and you have it at a good price point. Nice development.

 

[buzzardwhiskey]

This looks interesting. I'd like to try it in the IO Hornet's metal diffusion bowl.