Discontinued Inhalater XP

Ok the main thing that turns off me off from the PAX is:
1. Always cooking while its on
2. Needs to be stirred

The Inhalater is very appealing because of its cartridge design. I'd love to fill like 5 or 6 cartridges and go out on my day. Is it easy as that really? Any other big worries for maintenance?

Yes, but you would need something to hold those cartridges. Its always open on one end so its not like you can just throw em in a bag or anything. Why not just bring one cartridge and a pill bottle of material? Its not hard to fill it, it takes like 10 seconds.

btw the reloading as well as loading is so simple using the draw method. I've also heard it referred to as the suck method but I personally didn't like writing the "suck" method..lol

Care to explain this method? :)
 

exit

Well-Known Member
Ah, okay! Sounds good. I hope they'll make caps for them so you can keep a few ready to go!
It sounds more convincing than a Pax honestly.

The battery thing isn't too much of a worry... I can maintain a battery for a vape. My Persei and Bender is my preferred device right now. I keep them charged. And I have a OPHOS for when I need guarenteed power.

Anyone selling them??? Where does Mr. Inhalater recommend I spend my money? :lol:
 
exit,

Sonics420

Well-Known Member
I don't think the battery will be a concern, it lasts me all day and I charge it at night when I go to bed like my cell phone. I use my XP heavy during the day. A car charger is 5-10 bucks anyway and MICROUSB is very common today.. Every friends house has 1 lol.

Last night I put the XP to work, my cousin who never really vapes had a go at it. He had to put the XP down cause he said it hits too "fast" and "easy" (knob @ 5).. Basically he couldn't handle the vapor the XP threw at him :lol:.
 

Old School

Vape13man
Yes, but you would need something to hold those cartridges. Its always open on one end so its not like you can just throw em in a bag or anything. Why not just bring one cartridge and a pill bottle of material? Its not hard to fill it, it takes like 10 seconds.
Old School said:
btw the reloading as well as loading is so simple using the draw method. I've also heard it referred to as the suck method but I personally didn't like writing the "suck" method..lol​
Care to explain this method? :)

I may have read both of these Inhalater threads {1004 & XP} and back in there somewhere was someone how felt using those spongy ear plugs...idea being to cut off a small section that would then be rolled smaller to fit just inside of the caps...there were pictures looked pretty cool... someone else I think found some sort of small tube cap that seemed also to look pretty good... the idea I really liked was to have a belt that would hold loaded cartridges {like for a 6 shooter} and lets not stop there a clip can be made for the Inhalater too lol....

Seriously thou if you in fact were serious and again learned here in this forum; to load my caps I simply remove it from the INH... I like to leave the small tube attached as it gives me a bit more reach into my old "doob tubes" that now holds my pre-cut GSC.. I simply begin to draw air as I slip the cap down into the doob tube and when I pull it out it is filled completely and if I draw to hard I will even have a bit extra clinging trying it's darnedest to get inside the cap, which I can pack in with my finger {tip} you'll want to remember to continue to draw until you have the cap packed or covered as it will fall out but you'll figure that one out quickly...ha ha
It sounds more convincing than a Pax honestly.

A friend with the Pax got my attention but really seeing how far along it was technology wise made me go researching looking for better....2 maybe 3 days later I've decided on the INH XP but it was nowhere to be had....that waiting got the better of me went to a few LHS's one weekend and decided to take the leap and bought the VB2.0 and yes I felt it was better... even went back to get the DLX package {bubbler}...then 90 days in {give or take} it died but thankfully my new friends at Planet Vape had informed me that my XP's were in the mail.
Immediately I was taken in because to burn mine in, it was suggested that I toss in some ABV so I did and I couldn't believe the mount of vapor I was getting on level 5 with ABV I was throwing away. didn't like swallowing that pill....urrrr so now I have my newly replaced VB2.0 however the XP rules this roast now.

I can maintain a battery for a vape. My Persei and Bender is my preferred device right now. I keep them charged. And I have a OPHOS for when I need guarenteed power.

Anyone selling them??? Where does Mr. Inhalater recommend I spend my money? :lol:

OPHOS is that battery backup? just to be clear we currently have to charge the battery inside the XP there is not quick easy way to pop in another battery {perhaps in the future}.

Who can get them was a bit of a challenge... I ended up going with Planet Vape as I mentioned but if you rollback through this thread you will find a few others....good luck
 
Old School,

Inhalater

Well-Known Member
Manufacturer
Our objective is to start shipping next week as per delivery time given by our supplier.

Cleaning kit should be available in 2 months at the most. We can work something out for you if you wish. Labeling and packaging will be immature but kit fully operational.

The scheduled capsule pack is expected to contain 6-10 capsules. The conception will assure that no substrate comes out of capsule by way of butting the open end on the bottom of the pack. - Available soon

We have local distributors for US, CA, UK, FR, AU, ES, DE, AN as well as on E-bay

If you are in the U.S. please inquire with importer www.vaporoutlet.com for best retail location.

In Canada https://www.planetvape.ca/vaporizers/inhalater-xp-vaporizer.html

You may also inquire with exclusive Ebay retailer

http://www.ebay.com/itm/NEW-Black-S...t=LH_DefaultDomain_2&var=&hash=item4170bf61e9

All listed retailers are active members of FC :-)
 

tikimaize

Big Rigger Approved!
Our objective is to start shipping next week as per delivery time given by our supplier.

Cleaning kit should be available in 2 months at the most. We can work something out for you if you wish. Labeling and packaging will be immature but kit fully operational.

The scheduled capsule pack is expected to contain 6-10 capsules. The conception will assure that no substrate comes out of capsule by way of butting the open end on the bottom of the pack. - Available soon

Sounds great. Can't wait to see the capsule pack! As far as the cleaning kit I could care less about the packaging, I just want to be able to clean it properly. Thanks for keeping us updated.
 
tikimaize,

Old School

Vape13man
Cleaning kit should be available in 2 months at the most. We can work something out for you if you wish. Labeling and packaging will be immature but kit fully operational.

Cool what is this cleaning kit designed to clean exactly and what sort of price point we looking at?
The scheduled capsule pack is expected to contain 6-10 capsules. The conception will assure that no substrate comes out of capsule by way of butting the open end on the bottom of the pack. - Available soon
And here I thought I was being funny will it have a belt clip as well?
We have local distributors for US, CA, UK, FR, AU, ES, DE, AN as well as on E-bay

If you are in the U.S. please inquire with importer www.vaporoutlet.com for best retail location.

Listen Greg directed me towards these guys but I got nothing and I mean nothing not even a courteous email explain back log just a big fat nothing and I tried a couple of times. To bad because they are a stones throw away from me down here in Fl.

Listen not sure if you like suggestions but I was wondering if it would be difficult to add 2 maybe 3 ribs or ramps on the cap mouthpiece to allow it be gripped better when my finger tips slide over the now smoother surface...you know what I'm referring to so if we looked at it we would instantly know a hose {rubber tube} was going to slip over it. and I can't see it being an issue for those who actually put the lips on there. just something I wish for whenever the cap fights me a little coming out.....urrrr
 
Old School,

ru_frothi

Portable Vaporist
I haven't actually weighed it but I'd say about 3/4 of a gram.

On another note I broke one of my capsules. Pretty sure this happened because I put a different screen in there that wasn't cut perfectly and over time, when emptying the capsule by squeezing it, the screen cut in to the poly. So be careful when adding your modified screens.


no way. I have weighed and I can get over .3 in there but not .4

Suggestion: Blow the herb out and don't crinkle the capsule at all. It works really well, especially if everything is warm but works cold too.

My replacement XP is 1 month+ old now and still rockin!
 
ru_frothi,

gosaints420

Well-Known Member
no way. I have weighed and I can get over .3 in there but not .4

Suggestion: Blow the herb out and don't crinkle the capsule at all. It works really well, especially if everything is warm but works cold too.

My replacement XP is 1 month+ old now and still rockin!

I don't know about that I can fit .3 in a Solo bowl so I know I can fit at least twice as much in the XP. You got to pack it down.(it hits better packed to) Blowing the capsule out inside my house sounds like a mess I've been using a tooth pic lately when indoors.
 
gosaints420,

exit

Well-Known Member
I've tried emailing and called vaporoutlet but no response..... anyone have any leads towards USA based Retailers? I'm more than happy giving PV my business again but waiting for customs is brutal :o
 
exit,

swoops

Timelord
I've tried emailing and called vaporoutlet but no response..... anyone have any leads towards USA based Retailers? I'm more than happy giving PV my business again but waiting for customs is brutal :o

Order from Kush, I had no customs issues what so ever.
 
swoops,

Rrose Selavy

log enthusiast
taylor is great especially if you live in the u.s. cant say enough good things about his customer service
 
Rrose Selavy,

simmy

Well-Known Member
Our objective is to start shipping next week as per delivery time given by our supplier

Thanks for the update, Greg. :) I've been vape-less for 6 weeks now and I am JONESIN! Here's hoping the supplier delivers on time. You sound confident that the kinks will be worked out this round.

Peace

Simmy
 
simmy,

Inhalater

Well-Known Member
Manufacturer
Inhalater,

Old School

Vape13man
I've tried emailing and called vaporoutlet but no response..... anyone have any leads towards USA based Retailers? I'm more than happy giving PV my business again but waiting for customs is brutal :o

Yea I had the same ....zero response from that group... I can tell you though I went with PV and I got mine all the way down here in Florida 2 days early....OH so happy was I...especially since I was forced to burn again....I was jumpin for joy.... no doubt...
 
Old School,
  • Like
Reactions: exit

Dreamerr

Always in a state of confusion and silliness♀
I think you can pre-load with no cap, but I haven't tried it, fill it the same way I do with my bullets in the PN. l never felt the need to pre-load capsules since they were so easy to do on the fly. So after loading you just rip a small piece of bud off some of your stash and push it in the top. It creates a cap which holds the herb in. I then put it in a film container and nothing falls out of my bullet so again I assume the same for the capsule. I have done it with fairly dry bud but to dry it may flake but try it. You won't lose anything since it will be in a container of your choosing. Good luck.
 
Dreamerr,

Old School

Vape13man
No doubt. PV is a great service and I won't mind if I have to buy from them again :)

Is it worth buying extra capsules if you cant preload them and keep them shut?

http://www.theothersidevapes.com/servlet/the-838/Inhalater-INH004-Vaporizer-Replacement/Detail

I can tell you this I bought 4 extra but haven't open up 1 of them yet....as the 2 that came with seem to be all I needed....1 soaks while the other is used.....
I have the softer tube 3" and I simple turn as I squeeze and the cap is then emptied into a jar and I then put the tube in my mouth pop open my old doob tube and vacuum up a fresh batch of GSC..... seconds... quick and clean
 
Old School,

Old School

Vape13man
OMG NOoooooooo I went to bed last night and put my XP on the charger as I always do, but was very surprised to see the little green light was still on when I woke up. Now it doesn't seem to want to come on...before this happened I was noticing I was having to charge it more often....has anything like this happened to anyone else.....damn it ....I love this thing......
I tried it for awhile longer but it seems to be maybe too warm inside...junk battery maybe....urrrrr

Speaking of batteries has anyone tried or asked if we could use one of the new 2900mha they are offering with the Cera....? just a thought rolling around upstairs....
 
Old School,

gosaints420

Well-Known Member
I had the same thing happen two nights ago. There is some kind of bad connection with the switch. Try tapping it and or twisting it a few times, mine started working again but it is going to need to be replaced eventually.
 
gosaints420,
Top Bottom