Multi-brand HEALTHY RIPS FURY

[b0]

Oh forgot to add that I have been testing the capsules this past days and I find them to work better with the lid up. ABV doesn't get as dark but it's totally spent, so I guess capsules help with convection? It's funny cause I thought it was gonna be the opposite.

I'm as well using the 5ml vials. Usually I have one with 4 capsules, one capsule inside and an empty one where I drop the used ones.

Loving this vape more and more. Now the only thing I'm missing is an mp that look like the normal one but is all glass airpath. With that and capsules this vape will be perfect!

 

[khelek41girl]

Loving this vape more and more. Now the only thing I'm missing is an mp that look like the normal one but is all glass airpath. With that and capsules this vape will be perfect!

Someone with 3D printer access should make a regular mouthpiece with a hole for the WPA to slide in to so that the glass is protected and the WPA part sits flush on top. That would give you the all glass air path, the glass would be protected, and you could either use that for your water pieces or on the go and you wouldn't have to worry about breaking anything.

 

[OF]

I'm as well using the 5ml vials. Usually I have one with 4 capsules, one capsule inside and an empty one where I drop the used ones.

Now the only thing I'm missing is an mp that look like the normal one but is all glass airpath. With that and capsules this vape will be perfect!

Interesting technique, but what do you do with the fourth load? Put in the former full tube after taking the last one out? Others have posted about this general idea, two tubes. You're the first to add a dummy to that, which I assume is to keep the hot one off the bottom. Still, the idea bothers me a bit WRT efficiency.

I carry only one tube, loaded like 'everyone', with one in the machine. I store the used capsules 'lid down' and the loaded ones lid up. They cool plenty fast for me, and only one tube to carry. But, of course, any technique that suits you (or anyone) is fine by me.

The MP idea is sure to evolve with enough interest. For now I think the WPA is going in the right direction. It seems a natural for some Glassblower to cut the top off one and fuse other stuff on. For instance while it appears the WPA is made this way (with the bottom of the bent glass stem attached to a standard GonG end, it's definitely the way the similar one for ArGo is made (the standard stem is fused to a second, premade end. If you are looking for stealth, some sort of cover could be cobbled up to make it look more like an e-cig?

Replacing the top wont satisfy the all glass part since a gasket is needed. Shifting to the other stem scheme is the only way out of that, complete with reduced capacity of course.

Regards to all.

OF

 

[rozroz]

i can conclude i get a bit stronger & longer hits with the capsules..
somehow it condenses the material and heat in a more essential way.

 

[natural farmer]

Damn! I am sooo impressed with this little marvel!!! Definitely didn't expect it to be sooo good!!! I even had passing thoughts about temporarily selling my precious Omnivap to fund a Fury and then re-buy an Omni first chance I got!
And it temp-steps like no other so far for me!

 

[Nephele]

I have a friend who is doing CNC stuff for a living and I am just finding out if we can make a holder for those capsules. If we manage that and if the costs are managable, perhaps I can make him run a small production for us guys here. Nothing concrete yet though.

Yes! Yes! keep us updated please

I will order the capsules and be happy after they arrive and are actually as good as the picture and in the measurements stated. With these chinese purchases it always feels like wining the lottery when something is actually what it should be.

I even had passing thoughts about temporarily selling my precious Omnivap

Blasphemy! It's ok my child, it was a momentary weakness. Say 5 hail Mary's and it will all be forgiven! I am joking of course! I have the M and wait for my fury to arrive and and now I am even more excited (if that was even possible)


Are those capsules sturdy? I was gonna buy the two last ones but in my rush I only bought one and now they are sold out. Still a bit bummed out about that. Do you think they will last a while or are they sensitive and easy to break like the mighty?

 

[natural farmer]

Blasphemy!

I know, right???

I did a 4min session at 160°C today and then another at 170°C with the same load and straight-to-lung hits (don't even remember how many... ) and then finished it at Max temp with mouth-to-lung hits to be able to handle the harsher hits better. Never had a better low temp experience... Damn this thing can do it all so gracefully! Even MTLs! And there are very few vapes that can do those good enough!

 

[Nephele]

@natural farmer Oh man, I am on a t-break now and with your vaping description I had huge vape-gasms What is MTLs but the way? I want Fury MTLs and I want them badly before I even know what they are!

 

[Polarbearboy]

I'm another VapCap afficianado: M, stunning titanium Stardustsailor, beautiful wood Winegums, CocoOmni and Woodforvape ambrigona stand. Serious VAS sickness! But I don't use my VCs except at home, largely because of the torch, which isn't for the windy places I go and also looks too much like I'm doing crack. Yesterday after blowing through three HR caps with my Fury 2 on my long day of hiking, when I got home a nicely loaded VC hit the spot. But nearly as often lately, I find that the bent glass stem in my F2 takes me to almost the same place with a lot less effort and with very quick heatup.

MTL? Mouth to lung? Maybe the thing I like best about the near total restriction of the VC when the carb is blocked or there is no carb. Shooting for the whole load in 1 1/2 hits. Good fun!

 

[Choices]

Heck I thought MTL probably stood for maximum temperature level. Shows what I know...

 

[Polarbearboy]

Heck I thought MTL probably stood for maximum temperature level. Shows what I know...

I was just guessing. You could be right!

 

[HughJundys]

Bought one because I think it might be a fun little guy to kick around for a bit. I have a friend who needs to be doing this. I'll let him try the Fury 2 and a DynaVap and take whichever he likes best. I was able to add the new capsules to my order as well. I'll play with it for a week before handing it off. I think it will be a good indicator if I want the fierce.

 

[Vitolo]

What is MTLs but the way?

They are e-liquid tanks. (also liquid concentrates, like pure gold).
While MTL does stand for Mouth to lung vaping, it is a concept born of using e-juice or cannnabinized e-liquids.
I spent 45 minutes researching, and this is the info I gleaned from my reading.

I have given one Cerebral Palsy patient with a caregiver a few of the caps I received.
His brother fills them for him, and stops by at night to empty them and refill for next morning.
They tell me it has changed the healthy brothers time spent trying to help, and the patient says he loves the independence.

 

[shredder]

Yo, @HealthyRips.com any chance you can come up with a longer bent glass stem? I appreciate the cooler, flavorable vapor from the current stem, but longer is better, right?

Or maybe a longer snap on mouthpiece lined with glass. Thanks

 

[Polarbearboy]

I have given one Cerebral Palsy patient with a caregiver a few of the caps I received.
His brother fills them for him, and stops by at night to empty them and refill for next morning.
They tell me it has changed the healthy brothers time spent trying to help, and the patient says he loves the independence.

Yes!

 

[seannery82]

I have found that if you take the dosing capsule before a session and wedge it into the rubber screen gasket on the mouthpiece it will fit perfectly and will hold it in place (if you are careful) and you will have considerably better vapor production as there is no bypassed air, and all airflow is forced through the capsule. Just an observation. I find the capsules amazing for microdosing, they have been satisfying my cravings and at the same time keeping my tolerance lower than usual, a significant feat.

 

[LesPlenty]

come up with a longer bent glass stem

https://www.dhgate.com/product/s-sh...glass-attachment/197075329.html#mfavit-6-null
No shit, Sherlock, try this with the WPA.

 

[natural farmer]

@natural farmer Oh man, I am on a t-break now and with your vaping description I had huge vape-gasms What is MTLs but the way? I want Fury MTLs and I want them badly before I even know what they are!

You're welcome for those gasms!

I'm another VapCap afficianado: M, stunning titanium Stardustsailor, beautiful wood Winegums, CocoOmni and Woodforvape ambrigona stand. Serious VAS sickness! But I don't use my VCs except at home, largely because of the torch, which isn't for the windy places I go and also looks too much like I'm doing crack. Yesterday after blowing through three HR caps with my Fury 2 on my long day of hiking, when I got home a nicely loaded VC hit the spot. But nearly as often lately, I find that the bent glass stem in my F2 takes me to almost the same place with a lot less effort and with very quick heatup.

MTL? Mouth to lung? Maybe the thing I like best about the near total restriction of the VC when the carb is blocked or there is no carb. Shooting for the whole load in 1 1/2 hits. Good fun!

Mouth-To-Lungs indeed! They are a treat and a throat saver for us sensitive types out there!

And those two vapes... I think they will make a great match!

They are e-liquid tanks. (also liquid concentrates, like pure gold).
While MTL does stand for Mouth to lung vaping, it is a concept born of using e-juice or cannnabinized e-liquids.
I spent 45 minutes researching, and this is the info I gleaned from my reading.

I have given one Cerebral Palsy patient with a caregiver a few of the caps I received.
His brother fills them for him, and stops by at night to empty them and refill for next morning.
They tell me it has changed the healthy brothers time spent trying to help, and the patient says he loves the independence.

I use the term for vaporizers. MTL vapes for me are the ones who can do those throat saving hits in a comfortable fashion. It needs the right kind of restriction and the right kind of heating ime...

And gotta get me some of those caps for sure when I put the order...

Be great Vito!

 

[bossman]

I have found that if you take the dosing capsule before a session and wedge it into the rubber screen gasket on the mouthpiece it will fit perfectly and will hold it in place (if you are careful) and you will have considerably better vapor production as there is no bypassed air, and all airflow is forced through the capsule.

Super cool tip; can't wait to try it.

So do you remove the screen since the cap functions as a screen?

 

[Vitolo]

So do you remove the screen since the cap functions as a screen?

No.
The screen is what holds the capsule in place where it is closest to the heat.

 

[seannery82]

So do you remove the screen since the cap functions as a screen?[/QUOTE]

I do remove the stock screen as it gives you an extra half mm to work with and really wedge it in. there is a lip on the gasket that will stop you from inserting the pod too far. Its almost like they designed it with this in mind, if they did, kudos if not, very happy coincident.

 

[OyVape]

I am having an exceedingly hard time getting the lids back on these capsules, if I can even get the lids off in the first place. The tolerances are so tight, just handling the basket part of the capsules seems to cause them to go out of round very easily. Does anyone have any tips to make it any easier?

 

[OF]

Does anyone have any tips to make it any easier?

Yes, HANDLE THEM BY THE BOTTOM where they are much stronger and where minor damage, should it happen, won't matter. Avoid holding it by the sides where you're almost sure to crush them some eventually.

The rim of the cap is solid, grip it there. The base of the body is solid, again grip it there.

They are frail, 'ham fisted' types are likely to have troubles. But handling them by strong parts prevents most damage and confines that which happens to areas away from the lip. It's also easier to get troublesome caps back on if you slant them so the lip enters at an angle, 'walking' it up if necessary.

It can be done, lots of us are doing so, with few such troubles being reported. BTW my little loading tool:

Is working out great. I loaded as set, dumped it, then reloaded over and over testing it. Much easier to cap that way. The body is supported by the base automatically, all you need to do is poke it into your stash, brush off the excess, and put the cap on (with no issues of bending, etc). I've just made an improved version, it uses a plastic tube for the body with a dowel up the center to push the loaded capsule out after it's capped. No more fighting that part. After testing it some I'll post a photo of it......if I don't forget.

Weekend regards to all.

OF

 

[Choices]

I have found they tend to “snag” on the out of round portion of the top. I have found if I put that segment of the top of the basket in first I can somewhat shape it back to round a bit and then sort of roll the rest of the lid on to the basket. The tolerances are minimal so even what might seem okay in terms of tilting the lid as you put it on will cause it to be a challenge. I hope this helps.

 

[shredder]

https://www.dhgate.com/product/s-sh...glass-attachment/197075329.html#mfavit-6-null
No shit, Sherlock, try this with the WPA.

Sherlock in da house, lol. No shit.

I just tried your suggestion and it worked pretty well. A little awkward, to use, but the taste was great.

It was easier to use with the vape inverted, but then you can't see the screen.

I could see a simpier one piece solution being made someday because it does work very well, and these Vapes are getting popular, at least in my circles.