FlowerMate Vapormax V/V5.0/V5.0S/V5 Pro

Egzoset

Banned
Salutations Rekrab,

...not sure anyone can understand...

OKay, lets try pictures - once more. You've seen them all plenty of times before i believe:

Please, instead of turning me into this thread's topic - again - just tell me what it is that you didn't "understand" about those! After that i'm just hopeless.

:doh:
 
Last edited:
Egzoset,
  • Like
Reactions: Krizzle

paytonpenn

Level 30 Nature/Healer
Dismantled and broke my FlowerMate, luckily its not really broken, just need to solder some wires back into place.
VS3vF2G.jpg

wKWMDYB.jpg

GvlveKC.jpg

cwWVAHM.jpg

QlZ6DeM.jpg


The airpath is silicone, the plastic inner casing, tape, adhesive from the tape, an insulator around the heater (which honestly appears to be toilet paper), wires, the battery casing, and aluminum case. You herb does get the inside of the device a bit dirty. I love the design except for the casing and fact that they didn't make a very pure path when its definitely possible.
 

Pain

Well-Known Member
Cool air moving over wires and plastic does not concern me. Super heated air would though.

Hard to tell from the pictures but it looks like the heat is applied right below your herbs.
 
Pain,

mephisto

Well-Known Member
Thanks @Pain, welcome to FC. Sometimes clarity resides in the simplest forms. If the cannabic path is not to one's liking, buy a different product. If your faith rests in superheated silicon carbide, then there's your choice. The contrast presented is surely appreciated, however condescending and ivory tower it may feel.
 
mephisto,
  • Like
Reactions: Buildozer

Abysmal Vapor

Supersniffer 2000 - robot fart detection device
Dismantled and broke my FlowerMate, luckily its not really broken, just need to solder some wires back into place.
VS3vF2G.jpg

wKWMDYB.jpg

GvlveKC.jpg

cwWVAHM.jpg

QlZ6DeM.jpg


The airpath is silicone, the plastic inner casing, tape, adhesive from the tape, an insulator around the heater (which honestly appears to be toilet paper), wires, the battery casing, and aluminum case. You herb does get the inside of the device a bit dirty. I love the design except for the casing and fact that they didn't make a very pure path when its definitely possible.
Do you think a straw/tubing can be attached to the silicon and lead trough a drilled hole in the storage area ?
 
Abysmal Vapor,
  • Like
Reactions: KeroZen
Thanks @Pain, welcome to FC. Sometimes clarity resides in the simplest forms. If the cannabic path is not to one's liking, buy a different product. If your faith rests in superheated silicon carbide, then there's your choice. The contrast presented is surely appreciated, however condescending and ivory tower it may feel.
Well said :clap::clap:
 
Mr. Gweilo 420,

Stu

Maconheiro
Staff member
Dismantled and broke my FlowerMate, luckily its not really broken, just need to solder some wires back into place.
VS3vF2G.jpg

wKWMDYB.jpg

GvlveKC.jpg

cwWVAHM.jpg

QlZ6DeM.jpg


The airpath is silicone, the plastic inner casing, tape, adhesive from the tape, an insulator around the heater (which honestly appears to be toilet paper), wires, the battery casing, and aluminum case. You herb does get the inside of the device a bit dirty. I love the design except for the casing and fact that they didn't make a very pure path when its definitely possible.

Every time someone posts naked pics of a new vaporizer, I get a little aroused. :brow:

:peace:
 

olivianewtonjohn

Well-Known Member
Dismantled and broke my FlowerMate, luckily its not really broken, just need to solder some wires back into place.
VS3vF2G.jpg

wKWMDYB.jpg

GvlveKC.jpg

cwWVAHM.jpg

QlZ6DeM.jpg


The airpath is silicone, the plastic inner casing, tape, adhesive from the tape, an insulator around the heater (which honestly appears to be toilet paper), wires, the battery casing, and aluminum case. You herb does get the inside of the device a bit dirty. I love the design except for the casing and fact that they didn't make a very pure path when its definitely possible.

If you can find a glass tube (like a solo stem or something similar) and connect from the bottom upto the heater it would be an almost all glass air path. Looks doable

EDIT: NVM looks like im late to the party lol, same recommendations have already been stated. If a glass tube is too hard to find; check out you local home brew store or whatever and you can easily by food grade silicone tubing that size and cut it down so it fits snug.
 
Last edited:

Mister G

Deceptively Old Fart
Salutations PakaLoLo,



Right, don't even bother expecting one actually.

Now, how about those contricutions i make which ARE on topic and yet absolutely IGNORED?

:peace:

I read your posts, but I'll be honest, I only comprehend about 20% of the content. It's not the scientific stuff, I just find the prose hard to follow. I'm not trying to be rude or offend, but is English your second language? Regardless, I think your perspective on things is valuable and somewhat unique.
 

rekrab

Well-Known Member
Thankyou @Mister G for clearing this up, @Egzoset no hate towards you man, you seem to have some cool ideas for you vapes and good info. some of us just cant connect what your trying to say. even as a fellow canadian be it on different sides of the country. there is a definite language barrie or something. lets just all get stoned
 
rekrab,
  • Like
Reactions: Krizzle

Adobewan

Well-Known Member
Sorry to say, I've become familiar with the name Egzoset, not because I find his posts informative, but laborious to read. I too, like Mister G and rekrab, thought there was a language barrier.

@Egzoset, please don't feel ganged up on or unwelcome, I appreciate your contributions to the forum, but you may want to consider that some/many of us are not scientists and engineers here on FC, and if you were to communicate with us as you do with your layman friends, your posts might be easier for us to digest and less likely ignored.
Looking forward to your future posts.
Peace.

Back on topic, still loving my FM(or are we using VM). I beleive Zoey @ zoey@smokjoy.com is selling units at about $80 shipped, cheaper if you buy 2, cheaper still if you buy 3.
 

Egzoset

Banned
Salutations,

Dismantled and broke my FlowerMate...

Finally threre's something positive in this thread i can appreciate and understand! Do i need to express my satisfaction? It feels like a privilege, i sincerely consider it a favour.

The airpath... ...they didn't make a very pure path when its definitely possible.

My opinion as well, thank you very much for staying so focussed on topic. That changes. :tup:

All photographs seem nicely detailed and i'll take a much closer look to scrutinize those, at a later time, but my impression right now is that the manufacturer could have won the hearts of purists as well and yet it's like one designer was aiming just fine and then for no obvious reason his careful layout work gave place to some mysterious void of concern for US, the final owners. The later part being my own interpretation, of course.

...

Perhaps it can be hacked after all, another possibility is that the turmoil will have sufficient echoes to make some people react in an inclusive manner this time. Why not an economic vaporizer which everyone is willing to trust, the "purists" altogether...

:nod:

Cool air moving over wires and plastic does not concern me.

Total containment and separation of the inlet/cannabic/vent paths appears to be an option if an owner is determined, that's all i need to know.

mod note: Edited to remove off-topic comments
 
Last edited by a moderator:

Abysmal Vapor

Supersniffer 2000 - robot fart detection device
The site that sells the rebranded flowermate for 100$ says its V1.. Hopefully there will be a second revised version like the Titan did.. (although i don't know how well they did )
 
Abysmal Vapor,

pakalolo

Toolbag v1.1 (candidate)
Staff member
Salutations,



Finally threre's something positive in this thread i can appreciate and understand! Do i need to express my satisfaction? It feels like a privilege, i sincerely consider it a favour.



My opinion as well, thank you very much for staying so focussed on topic. That changes. :tup:

All photographs seem nicely detailed and i'll take a much closer look to scrutinize those, at a later time, but my impression right now is that the manufacturer could have won the hearts of purists as well and yet it's like one designer was aiming just fine and then for no obvious reason his careful layout work gave place to some mysterious void of concern for US, the final owners. The later part being my own interpretation, of course.

...

Perhaps it can be hacked after all, another possibility is that the turmoil will have sufficient echoes to make some people react in an inclusive manner this time. Why not an economic vaporizer which everyone is willing to trust, the "purists" altogether...

:nod:



Total containment and separation of the inlet/cannabic/vent paths appears to be an option if an owner is determined, that's all i need to know.

The person most responsible for turning threads into discussions about you is... you. Please stop. No one, including you, should be posting about anyone's posting style—even your own. I've removed your comments along these lines. Please don't put us in the position of deleting your rants and responses about your posts and you.
 

jae0072

Unapproved commercial account.
Why pay 100$ when you can get it for 80$?

and a knockoff rebrand at that....:doh::shrug:

All about warranty. Would you rather deal with an American company in California vs Chinese company in China :) ?

Yeah but do they offer a warranty? Otherwise I don't see any reason not to just buy it on eBay or dhgate/alibaba for $25 less... (At least that's only with shipping to US)
Yeah they have 14 days return policy and offer lifetime limited warranty + 1 year full warranty. btw I hate dealing with ebay seller:)
 
Last edited by a moderator:

rekrab

Well-Known Member
to be honest these chinese dealers even seem pretty awesome and willing to offer refunds or send new units for broke ones and make deals. They have actually somewhat surprised me. only the future will tell though
 

Abysmal Vapor

Supersniffer 2000 - robot fart detection device
All about warranty. Would you rather deal with an American company in California vs Chinese company in China :) ?
What makes you feel American companies are "more real" and offer better CS than Chinese ?I can tell from my experience i have met much more US douche bag sellers than Chinese ... Chinese have more business honor than USA for sure.. Haven't i bet there are numerous US companies selling knockoffs for 5 times the price that have dissapeared trough the years leaving the customers hanging with their damaged units.. For example MW and Incognito case..Also it is much easier for US company to go "in debt" and "bankrupt" than a Chinese one that is strongly supported by the government :)
Don't know about now but when i was i child American was stand for "high quality" not "affordable"
from our view.. Since this is not an US made product i can't see how an US based company selling rebranded Chinese vapes can offer you better service other than shorter delivery times :).. If you are in hurry and don't like waiting.. for sure u can justify that 25$ more.. but this is 50% of the products value
 

Tricuspid

New Member
Mine came in 4 days after I received an email that it was shipped, I ordered from flower wen.

Also if your item breaks in a week you can always open an ebay ticket (they always refund the buyer) if the seller wont honor a replacement.

keep in mind it only works if you didn't open up the flowermate like the pictures above ^[/QUOTE]
 

Moar Nao

New Member
llamaman001 - this is not the same heating chamber as the Flowermate.

The Flowermate heats up the ceramic and only the ceramic. This Atmos device has a coil directly INSIDE the ceramic chamber and will burn your product - just like a G-Pen.

I'm a n00b poster but just got my FM VV last night and. . . wow! After 2 years of using my buddy's Arizer Q, I picked up a G-Pen 2 weeks ago and promptly cried, it doesn't vap, it only burns. Great stealth but just doesn't vap. Then I stumbled on THIS thread, followed along a grabbed a VV from Flower. Customs gave me a run-around for an extra week but I'm glad to say the item finally arrived and it actually vaps! Honestly to goodness, no burning, no direct contact with coils, no ash, no combustion at all. Just sweet, tasty vap :)

I hope a V2 comes out with a purer vapor path, I'd gladly pay $30 more than the $50.50 this cost me for that detail. Otherwise I wouldn't change a thing. Not even the set temperature (I get a very, very nice taste from mine and decent clouds, comparable with the Arizer on medium heat).

. . . I guess the clones will pop up soon though seeing this sell so much! Just be careful folks, those coil designs will never vap like this thing. . .
 
Top Bottom